The FCR register content might change during mem-to-mem DMA transfers,
Forcing it back in the acquire should be sufficient to ensure proper
operations.
Since the "EXTI->PR" is an "rc_w1" type of register, we need to be
careful when clearing our interrupt flag in the register. When there
are multiple interrupt flags set in the register, the "|=" operation
will mistakenly clear all pending interrupts instead of just ours.
- On pwm_poweron, the PWM resolution was not restored. (A custom resolution was
only usable if, PWM channel 0 is not used. That configuration is not common,
so this bug was likely never triggered)
- Disabled a work around to prevent flickering:
- Previously, PWM was disconnected on level 0% and 100%
- This increases the run time of `pwm_set()`
- It prevents using the PWM for wave form generation via DDS, as the wave
noticeably jumps when reaching 0% or 100%
- Slightly reduces memory requirements: 2 Bytes of RAM, 112 Bytes of ROM
- Tested with avr-gcc 9.2.0 and LTO enabled
Drop `#include "irq.h"` in `cpu.h`, which was there for a legacy work around.
A bunch of missing includes of `irq.h` materialized due to this and were
fixed.
- Drop duplicated `cpu.c` and `cpu_conf.h`: Those are already provided by
`cpu/atmega_common`.
- The higher values for default stack size of `cpu_conf.h` in
`cpu/atmega_common` results in three tests no longer fitting the available RAM
==> Updated the Makefile.ci to skip linking of those tests for the Arduino
Leonardo
We don't need to define FLASHPAGE_SIZE and FLASHPAGE_NUMOF ourself if
the BPROT peripheral is present.
Now why nrf52840 doesn't have it, I don't know, but for nrf52832 and
nrf23811 the values in BPROT_REGIONS_SIZE and BPROT_REGIONS_NUM match
the values manually provided here before.
__set_PRIMASK(state) had been directly inlined to avoid a hardfault that
occured when branching after waking up from sleep with DBG_STANDBY,
DBG_STOP or DBG_SLEEP set in DBG_CR.
The hardfault occured when returning from the branch to irq_restore,
since the function is now inlined the branch does not happen either.
Refer to #14015 for more details.
irq_% are not inlined by the compiler which leads to it branching
to a function that actually implement a single machine instruction.
Inlining these functions makes the call more efficient as well as
saving some bytes in ROM.
Flashing an ESP board first requires the creation of a flash image from the ELF file. This is realized in the `preflash` target. However, the `preflash` target only depends on the variable `BUILD_BEFORE_FLASH` but on the ELF file. Therefore, the variable `BUILD_BEFORE_FLASH` must be set to the ELF file to ensure that when using multiple make processes, the compilation of the ELF file is completed before the flash image is created.
