1855b9e9bd
Merge pull request #17199 from aabadie/pr/boards/stm32f769i-disco-cleanup
...
boards/stm32f769i-disco: fix and cleanup default configuration
2021-11-15 17:58:51 +01:00
Francisco Molina
6346fc8613
boards/lora-e5-dev: map a4, a5 analog inputs
2021-11-15 17:07:21 +01:00
600adb8ec6
Merge pull request #17197 from fjmolinas/pr_dwm1001_spi0_pins
...
boards/dwm1001: fix SPI0 miso/mosi pins
2021-11-15 15:25:41 +01:00
d9c78201cc
boards/stm32f769i-disco: remove wrong DMA configuration
2021-11-15 15:09:04 +01:00
527d321533
boards/stm32f769i-disco: fix mistake in Kconfig clock config
2021-11-15 15:08:20 +01:00
Francisco Molina
2b842a9ec5
boards/dwm1001: fix SPI0 miso/mosi pins
2021-11-15 10:53:36 +01:00
benpicco
1c3ceb2bd6
Merge pull request #17185 from fjmolinas/pr_lora_e5_dev_warning
...
boards/lora-e5-dev: add warning in doc
2021-11-12 13:42:17 +01:00
Francisco Molina
773d576bdc
boards/lora-e5-dev: add warning in doc
2021-11-11 16:51:51 +01:00
1772628483
Merge pull request #16186 from kaspar030/fix_native_notext
...
cpu/native: add `-no-pie` to LINKFLAGS
2021-11-11 11:50:54 +01:00
a78689874a
cpu/native: add -no-pie to LINKFLAGS
...
This fixes the following warning on newer gcc/ld:
```
/usr/bin/ld: examples/hello-world/bin/native/cpu/tramp.o: warning: relocation against `_native_saved_eip' in read-only section `.text'
/usr/bin/ld: warning: creating DT_TEXTREL in a PIE
```
2021-11-10 20:38:25 +01:00
Francisco Molina
002df1c5c2
boards/lora-e5-dev: set tx_pa_mode to HPA
2021-11-08 18:42:34 +01:00
Francisco Molina
c208300f2b
boards/lora-e5-dev: add lm75a to saul default
2021-11-08 09:37:51 +01:00
Francisco Molina
c393efd360
boards/lora-e5-dev: enable 3.3V and 5V output by default
2021-11-08 09:37:51 +01:00
Francisco
2947a8c669
Merge pull request #17108 from MrKevinWeiss/pr/stk3200/spi
...
boards/stk3200: Fix spi config
2021-11-05 15:08:24 +01:00
2f44452d78
boards/microbit: migrate to ztimer
2021-11-04 15:39:58 +01:00
MrKevinWeiss
9d2647ec8b
boards/stk3200: Fix spi config
...
The spi bus for the stk3200 doesn't actually work.
Other efm32 based boards do work.
After some guessing and some checking it turns out that the .loc is wrong.
The original was USART_ROUTE_LOCATION_LOC1, which appears in other periph_conf.
After changing it to USART_ROUTE_LOCATION_LOC2 the spi bus actually outputs data.
2021-11-04 09:35:45 +01:00
b0fa356ec6
boards/calliope-mini: use microbit common mineplex module
2021-11-03 12:10:14 +01:00
67add34e75
boards/microbit: put mineplex dependency resolution in common
2021-11-03 11:25:56 +01:00
Marian Buschsieweke
9893efd96f
boards/common/silabs: fix dependencies
...
The module silabs_pic depends on the feature periph_i2c. However, the
dependency resolution just selected the module implementing that
feature which bypasses feature checks.
2021-11-02 13:34:04 +01:00
Leandro Lanzieri
f64b166319
Merge pull request #16845 from MrKevinWeiss/pr/kconfig/supportstms
...
.murdock: Add nucleo boards to kconfig test
2021-11-01 09:55:22 +01:00
9256970517
Merge pull request #17079 from kaspar030/exclude_some_dox_warnings
...
boards/nucleo-g07xrb: fix or exclude some doxygen warnings
2021-10-29 16:38:21 +03:00
6cbc494a96
boards/nucleo-g07xrb: close some ADC doxygen groups
2021-10-29 10:49:02 +02:00
J. David Ibáñez
c965ce3de6
boards/common/arduino-atmega: define F_CPU
...
This fixes the following error:
$ BOARD=arduino-mega2560 make -C tests/pkg_arduino_sdi_12/
[...]
[...]/RIOT/build/pkg/arduino_sdi_12/src/SDI12_boards.cpp:35:16: error: ‘preSDI12_TCCR2B’ defined but not used [-Werror=unused-variable
35 | static uint8_t preSDI12_TCCR2B;
2021-10-28 15:59:40 +02:00
45c8e3e79e
boards/adafruit-clue: use internal RC oscillator
2021-10-28 10:03:53 +02:00
Gunar Schorcht
697c44811a
Merge pull request #16911 from yarrick/esp_jtag
...
cpu/esp32: Add openocd programming support
2021-10-26 01:24:27 +02:00
Erik Ekman
cbecb4d249
boards/esp32-wrover-kit: Enable esp_jtag module
...
Allows use of openocd by just setting PROGRAMMER.
2021-10-25 21:11:29 +02:00
Francisco
81458c8eed
Merge pull request #17021 from fjmolinas/pr_remove_board_fox
...
boards/fox: remove BOARD
2021-10-23 11:30:35 +02:00
Francisco
43befee63c
Merge pull request #17030 from bissell-homecare-inc/nucleo-g431rb-pwm
...
boards/nucleo-g431rb: added PWM configuration
2021-10-22 14:43:56 +02:00
kl
4b0a28aba2
boards/stm32f469i-disco: fix documentation
2021-10-21 21:58:12 +02:00
Dave VanKampen
eb09d2dafb
boards/nucleo-g431rb: added PWM configuration
2021-10-21 10:25:15 -04:00
Francisco Molina
e0678e9eb4
boards/fox: remove support
...
Remove support of unavailable BOARD.
2021-10-20 13:51:49 +02:00
df6ad4b4d0
boards/nrf52840dk: periph_conf.h: include "kernel_defines.h"
2021-10-20 11:36:55 +02:00
benpicco
f57e2f1e99
Merge pull request #16055 from benpicco/soc_init
...
cpu: call cpu_init() from startup code, not from board
2021-10-18 20:52:53 +02:00
Erik Ekman
8b467534fe
boards/esp32-wrover-kit: Add openocd config and docs
2021-10-18 20:11:32 +02:00
benpicco
7a413558db
Merge pull request #16305 from iosabi/esp_rts_dtr
...
boards/common/esp8266: Set RTS and DTR to 0 on pyterm.
2021-10-18 16:42:55 +02:00
ngandrass
ac1250786a
boards/nucleo-l152re: Fix Kconfig board name
...
Kconfig board name for the nucleo-l152re contained a "0" (zero) instead
of the capital letter "O". All faulty occurrences were replaced.
2021-10-18 11:22:27 +02:00
Erik Ekman
4911066fb0
board/esp32-ethernet-kit: Document openocd flash/debug
2021-10-15 10:13:29 +02:00
Erik Ekman
739ec44739
board/esp32-ethernet-kit: Set openocd board file
2021-10-15 10:00:59 +02:00
Marian Buschsieweke
696598ff9e
Merge pull request #16985 from gschorcht/cpu/esp/fix_doc
...
cpu/esp8266, boards/*esp*: fix documentation
2021-10-15 07:54:40 +02:00
Gunar Schorcht
de78a827c3
boards/esp32: reformat docs for 80 chars
2021-10-15 02:50:21 +02:00
Gunar Schorcht
4c03e9c113
boards/esp8266: reformat text for 80 chars
2021-10-15 02:50:21 +02:00
Gunar Schorcht
bce0d4cb10
boards/esp32: fix documentation
...
Fixes various issues in documentation:
- replaces HTML anchor tags in markdown headings by markdown heading IDs.
- replaces HTML linebreaks by newline commands
- replaces \htmlonly commands for image resizing by the width argument in \image commands
- uses more unique identifiers for references
- uses stable references for driver documentation
- fix broken links to external HTML documents
- replaces the TOC link in headers by a back to TOC link below each section
- replaces ``` fenced code blocks by ~~~
2021-10-15 02:50:21 +02:00
Gunar Schorcht
39273f74b4
boards/esp8266: fix documentation
...
Fixes various issues in documentation:
- replaces HTML anchor tags in markdown headings by markdown heading IDs.
- replaces HTML linebreaks by newline commands
- replaces \htmlonly commands for image resizing by the width argument in \image commands
- replaces
- uses more unique identifiers for references
- uses stable references for driver documentation
- fix broken links to external HTML documents
- replaces the TOC link in headers by a back to TOC link below each section
- replaces ``` fenced code blocks by ~~~
2021-10-15 02:50:21 +02:00
Gunar Schorcht
a3ca9776c2
cpu/esp8266: fix documentation format
...
Fix various issues with incompatibilities of markdown supported by doxygen.
2021-10-15 02:50:21 +02:00
MrKevinWeiss
c7820cf7e5
*/rtt|rtc: Fix Kconfig modeling
2021-10-14 11:28:44 +02:00
MrKevinWeiss
8fc9f9a0cb
boards/p-nucleo-wb55: Fix Kconfig to use nucleo common
2021-10-14 11:28:44 +02:00
MrKevinWeiss
91b71a5fb2
boards/nucleo*: Model Kconfig lpuart based on stdio
2021-10-14 11:28:43 +02:00
MrKevinWeiss
c9ffb8d2af
board/common/nucleo: Use and doc HAVE_* Kconfig
2021-10-14 11:28:42 +02:00
Benjamin Valentin
fc88c4c4e5
boards: drop cpu_init()
2021-10-13 23:36:41 +02:00
Benjamin Valentin
d2fdacd3f3
b/c/particle-mesh: move monofirmware setup to post_startup()
2021-10-13 23:21:56 +02:00
benpicco
ffd1254eac
Merge pull request #16959 from bissell-homecare-inc/stm32g031-disco
...
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 23:17:06 +02:00
Dave VanKampen
55ea8cfb97
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 12:14:45 -04:00
Gunar Schorcht
54c049fe0c
boards/esp_common: fix refs to CPU doc section
2021-10-13 17:37:16 +02:00
Marian Buschsieweke
cf7e9e34b0
boards/esp32-wrover-kit/doc: Restore center alignment of tables
2021-10-13 14:56:28 +02:00
luisan00
50277d31e9
boards/stm32f469i-disco: Add board
2021-10-13 11:22:45 +02:00
Marian Buschsieweke
49ab2f0ef2
boards/*esp32*: Fix documentation format
...
Fix broken references and missing open/closing group commands.
2021-10-10 21:35:31 +02:00
Marian Buschsieweke
72cab30703
boards/esp32-wrover-kit: Fix documentation format
...
Fix various issues with incompatibilities to flavor of markdown
supported by Doxygen and re-format text.
2021-10-10 21:35:30 +02:00
benpicco
5a9c659f5d
Merge pull request #16916 from leandrolanzieri/pr/boards/avr-rss2/remove_module_macro
...
boards/avr-rss2: properly enable `atmega_pcint0`
2021-09-30 17:03:11 +02:00
Leandro Lanzieri
b160e43233
Merge pull request #16837 from fjmolinas/pr_kconfig_nrf52
...
cpu/nrf52: initial kconfig modeling (no netif)
2021-09-30 09:57:11 +02:00
Leandro Lanzieri
6999931262
boards/avr-rss2: properly enable atmega_pcint0 module
2021-09-30 09:27:23 +02:00
Francisco Molina
3e4b35c445
boards/nrf52840dk-nrf52dk-dwm1000: add kconfig dependencies
2021-09-29 10:19:27 +02:00
Francisco Molina
c9de733c52
cpu/nrf52/Makefile.dep: move radio dependencies from boards/common
2021-09-29 10:16:31 +02:00
Dave VanKampen
ef6fc615ab
boards/nucleo-g071rb: Added ADCs 0-5 for g071 nucleo
2021-09-24 10:21:17 -04:00
Dave VanKampen
f278df5c96
boards/nucleo-g070rb: Added ADCs 0-5 for g070 nucleo
2021-09-24 10:21:10 -04:00
Benjamin Valentin
25a5df2166
boards: select 868 MHz band for CC110x
2021-09-17 12:58:10 +02:00
Jean-Pierre De Jesus DIAZ
70b074ff8f
boards/adafruit-clue: fix doxygen warnings
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-09-14 11:16:50 +02:00
luisan00
8f7575983c
boards:samd21-xpro add peripheral usbdev
2021-09-10 16:09:31 +02:00
Kevin "Tristate Tom" Weiss
4c6dc973c8
Merge pull request #16719 from MrKevinWeiss/pr/kconfig/cc2538
...
cpu/cc2538: Add Kconfig support
2021-09-09 08:21:09 +02:00
benpicco
bcaaaec66f
Merge pull request #16814 from dylad/pr/cpu/nrf9160_add_twi_and_spi_support
...
cpu/nrf9160: add twi and spi support
2021-09-08 19:11:37 +02:00
MrKevinWeiss
483bca453e
boards/common/remote: Add Kconfig for remote boards
2021-09-08 12:40:32 +02:00
dylad
0c60a2a600
boards/nrf9160dk: add TWI and SPI configuration
2021-09-06 20:15:18 +02:00
Martine Lenders
873f6936ea
Merge pull request #16788 from benpicco/common/nrf52-netdev_default
...
boards/nrf52: replace gnrc_netdev_default with netdev_default
2021-09-03 14:37:25 +02:00
Benjamin Valentin
702c3435a8
boards/nrf52: replace gnrc_netdev_default with netdev_default
...
Only nimble depends on GNRC, but we want to replace gnrc_netdev_default
with netdev_default, so check for gnrc instead.
2021-09-02 14:36:22 +02:00
benpicco
9892286d20
Merge pull request #16793 from MarcelStenzel/hifive1b_uart_pin_fix
...
boards/hifive1b: Fix uart dev1 pins
2021-09-02 12:24:45 +02:00
benpicco
550565f052
Merge pull request #16783 from benpicco/avr8_clk_init
...
cpu/atmega_common: move clock init to common code
2021-09-01 22:28:14 +02:00
MarcelStenzel
aad5ac83f2
boards/hifive1b: Fix uart dev1 pins
2021-09-01 13:42:27 +02:00
Benjamin Valentin
87f7e5a963
cpu/atmega_common: move clock init to common code
...
This code should not be in the realm of the board config, but in
common arch code.
2021-08-27 17:06:50 +02:00
Jean Pierre Dudey
719a18ca8b
Merge pull request #16773 from jeandudey/ili9341-flip
...
drivers/ili9341: add rotation mode to ili9341_params_t
2021-08-27 14:21:56 +02:00
benpicco
19acd2e6a1
Merge pull request #16778 from benpicco/cpu/riscv-deps
...
cpu/riscv_common: cleanup dependencies
2021-08-26 16:37:37 +02:00
Jean-Pierre De Jesus DIAZ
d74bfaac17
boards/pinetime: add ILI9341 rotation mode param
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Jean-Pierre De Jesus DIAZ
ee413f2f7f
boards/esp32-wrover-kit: add ILI9341 rotation mode param
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Jean-Pierre De Jesus DIAZ
d0bedf5273
boards/adafruit-clue: add ILI9341 rotation mode param
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
benpicco
dde4772aa4
Merge pull request #16003 from benpicco/cpu/nrf52/saul-vddh
...
cpu/nrf52: add SAUL driver for VDDH sensor
2021-08-25 20:31:53 +02:00
chrysn
5497c1ca78
Merge pull request #15658 from chrysn-pull-requests/nrf52840dongle-quickstart
...
boards/nrf52840dongle docs: Introduce "quick start" section
2021-08-25 19:47:41 +02:00
chrysn
33fc9fa174
boards/nrf52840dongle docs: Introduce "quick start" section
...
to mention the board name; also to point to a good first example to use
with this board.
Closes: https://github.com/RIOT-OS/RIOT/issues/15654
2021-08-25 19:26:39 +02:00
benpicco
6d28911719
Merge pull request #16777 from miri64/feather-nrf52840/doc/several-fixes
...
feather-nrf52840: several fixes to documentation
2021-08-25 13:11:18 +02:00
Martine Lenders
a1ab612873
boards/feather-nrf52840: update terminal doc for current status quo
2021-08-25 12:46:11 +02:00
Martine Lenders
1f17769038
boards/feather-nrf52840: add missing commands for uf2 instructions
2021-08-25 12:46:11 +02:00
Benjamin Valentin
e92a4b9628
cpu/gd32v: enable periph_timer_periodic
2021-08-25 10:48:48 +02:00
Gerson Fernando Budke
0232e9d89c
boards: Introduce atxmega-a1-xplained board
...
Add initial version.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-24 21:25:14 -03:00
benpicco
2de7dab0f4
Merge pull request #16288 from nandojve/xmega_ebi
...
cpu/atxmega/periph: Add ebi driver
2021-08-25 00:38:22 +02:00
benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
Martine Lenders
fe39542618
boards/feather-nrf52840: fix shell command formatting in doc
2021-08-24 17:50:21 +02:00
Martine Lenders
5029631a1b
boards/feather-nrf52840: fix typo and link where to get nrfjprog tool
2021-08-24 17:49:40 +02:00
f8bb757bae
seeedstudio-gd32: Initial include of board
...
The seeedstudio-gd32 is an small development board based on the
gd32vf103 MCU
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2021-08-24 14:30:23 +02:00
Gerson Fernando Budke
9b36657793
boards/atxmega-a1u-xpro: Add ebi configuration
...
Enable EBI (External Bus Interface) and configure LPC SRAM memory. This
set RIOT-OS to use up to 64k external data SRAM.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-24 08:35:41 -03:00
Gerson Fernando Budke
307e8c7a17
cpu/atxmega: Add external bus interface
...
Introduce XMEGA EBI driver. This enable EBI for use with all memory
supported by the device and peripherals. It include support to SRAM,
SDRAM, LCDs or any other external bus access.
Note: This feature only works for A1/A1U series, which are, the series
with EBI hardware.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-24 08:35:41 -03:00
Gerson Fernando Budke
2d3f7bf17c
cpu/atxmega: Fix features config
...
Update features definitions and configurations. Now atxmega define
features that only are full available on all variations and do not
require any definition at periph_conf.h file.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-17 12:42:59 -03:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Fabian Hüßler
e89ef368c1
cpu/rpx0xx: implement periph timer
2021-08-09 10:45:34 +02:00
