Vincent Dupont
ae95137f95
can stm32: add a driver for STM32 bxCAN peripheral
...
This driver is compliant with the candev interface. It has been tested
with STM32F0 and STM32F2 and STM32F413 ONLY at this time but should be
compliant with other STM32Fx devices
2019-03-29 12:03:43 +01:00
Dylan Laduranty
ccf12c57a8
Merge pull request #10884 from fedepell/sam_rwee_support
...
sam0 flashpage RWWEE flash support
2019-03-28 11:00:25 +01:00
c697a3bfd8
usbdev: extend events with suspend/resume
2019-03-25 21:03:21 +01:00
Federico Pellegrin
5faafac092
sam0 flashpage RWWEE flash support
2019-03-21 04:27:41 +01:00
4d352fc93f
usbdev: Extend with low level initialization functions
2019-03-20 09:12:24 +01:00
9af6c69a93
usbdev: Introduce a common API for USB peripherals
...
This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
2019-03-14 21:44:56 +01:00
Yegor Yefremov
b8ff48cce4
periph/uart: improve documentation
...
Change description to reflect the configurability of the serial
interface.
Also, fix the uart_mode parameter description as the UART will be
configured and not initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-11 09:35:23 +01:00
Yegor Yefremov
ddf19783d7
periph/uart: add support for enhanced serial settings
...
As suggested in PR#5899 add a routine uart_mode() that will
setup data bits, stop bits and parity at runtime.
uart.h provides a set of enums defining these settings and each
platform will override them to specify values corresponding to
its configuration registers.
The idea behind the enums is to specify default settings i.e. 8N1
through the 0 value item. Invoking uart_mode(uart, 0, 0, 0) will
setup 8N1 mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:11 +01:00
MrKevinWeiss
0ad94e1b4b
drivers/include/i2c: Fix API documentation
...
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
2018-12-10 09:56:40 +01:00
Hauke Petersen
39f0e4d5d3
periph/uart: fix line length in doc header
2018-12-06 10:08:56 +01:00
1008ab4fdf
drivers/periph_eeprom: add eeprom_set function
2018-12-04 11:24:57 +01:00
50f19d1d1f
drivers/periph_eeprom: add clear and erase functions
2018-12-04 11:24:57 +01:00
Joakim Nohlgård
a867aeaba2
periph/i2c: Add precondition on i2c_acquire for i2c bus access
2018-11-28 08:43:01 +01:00
e9a6ebc409
cpu: drivers/eeprom: refactor periph_eeprom implementation
2018-10-16 10:39:10 +02:00
Martine Lenders
0598d5bcf1
periph_gpio: comment IRQ #endif correctly
2018-10-09 15:11:45 +02:00
Martine Lenders
a95957e513
Merge pull request #9992 from haukepetersen/fix_periph_gpiofeaturesscope
...
periph/gpio: fix scope of GPIO_IRQ submodule
2018-10-09 15:10:39 +02:00
Hauke Petersen
bd66184eb2
periph/gpio: re-add irq functions to doxygen
2018-09-21 08:31:09 +02:00
Hauke Petersen
abc11c8e23
periph/gpio: fix scope of GPIO_IRQ submodule
...
Move the gpio_irq_enable() and gpio_irq_disable() functions
into the scope of the PERIPH_GPIO_IRQ submodule.
2018-09-21 08:30:29 +02:00
smlng
a9e848f648
periph/rtt: add missing std header
...
The periph/rtt.h uses `uintX_t` typedefs but misses the required
standard header file, namely `stdint.h`, which is added here.
2018-09-07 14:54:23 +02:00
Joakim Nohlgård
ace717ee27
drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ
2018-08-29 08:53:20 +02:00
Francisco Acosta
71d3c14354
drivers/periph_common/eeprom: remove the now unnecessary cpu.h include
2018-08-15 15:27:03 +02:00
smlng
2db2ce2dc7
doc: rename sections in i2c.h
2018-07-25 12:01:40 +02:00
dylad
ef8ed2620c
periph_common/i2c: introduce new ret codes scheme
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
872251d011
periph/i2c: Add 10 bit addressing magic number definition
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
f2a2427fcd
periph/i2c: Editorial changes to i2c.h
2018-07-25 12:01:34 +02:00
01509b294f
drivers/periph_i2c: i2c_init should return void
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
1dfc5f8f52
periph/i2c: Editorial doc changes
2018-07-25 12:01:34 +02:00
6f25886d77
drivers/periph/i2c: fixes issues in API
...
- non matching doxygen input parameter to i2c_write_reg
- non/matching missing function parameter
- invalid return type to i2c_release
2018-07-25 12:01:34 +02:00
dylad
e11a37df03
drivers/i2c: modify I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Hauke Petersen
45ab3ea89d
drivers/periph: introduced new I2C interface
2018-07-25 12:01:34 +02:00
Vincent Dupont
071614bf04
Merge pull request #8543 from OTAkeys/pr/rtt_clean_up
...
periph_rtt: remove RTT_NUMOF guard and init from periph_common
2018-07-10 15:00:53 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
Vincent Dupont
1f409d09dd
drivers/flashpage: use const ptrs for write/verify
2018-03-13 21:51:37 +01:00
Yannick Gicquel
34f2b3e6f9
drivers/qdec: doxygen rendering fixes
...
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2018-03-01 20:53:34 +01:00
Gilles DOFFE
58b7ed3fa9
drivers: add periph_qdec
...
QDEC interface enables access to CPU peripherals acquiring quadrature
signals.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 21:40:15 +01:00
Vincent Dupont
6840c15db0
periph/rtt: remove RTT_NUMOF guard from header
2018-02-09 15:51:06 +01:00
kYc0o
6dffb71b09
drivers/include/periph/flashpage.h: add flashpage_write_raw
2017-11-30 17:25:35 +01:00
Bas Stottelaar
31c7e9e4c2
periph: i2c: include note on address alignment.
2017-10-31 20:50:42 +01:00
Hauke Petersen
5920d99752
pm: fix weak-based default implementations
...
Instead of using `weak` function definitions, this PR handles
default implementations using `PROVIDES_x` defines, allowing
for cpus/pm realted modules to use their own implementations.
2017-10-16 14:27:35 +02:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
Hauke Petersen
7204ec3166
periph/rtc: removed RTC_NUMOF guards from header
2017-08-23 15:39:16 +02:00
Sebastian Meiling
95b31660b6
Merge pull request #7173 from haukepetersen/opt_gpiodoc
...
drivers/gpio: improved doc for gpio_init()
2017-07-14 14:17:39 +02:00
Hauke Petersen
a2bc258af0
drivers/dac: clarified doc and named return values
...
- added more comprehensive doc to dac_init and dac_set
- named return values for dac_init
- use named return values in existing implementations
2017-06-27 12:52:12 +02:00
Hauke Petersen
3ec75635ba
drivers/gpio: improved doc for gpio_init()
2017-06-26 13:39:28 +02:00
smlng
15f8703f01
doc: use markdown sections, adapt pwm.h
2017-06-06 16:07:51 +02:00
smlng
756e3d95fb
doc: make detailed description of flashpage interface more visibile
2017-06-06 16:05:52 +02:00
smlng
236c6cb013
doc: enhance doxygen doc of PM module
2017-06-06 16:05:52 +02:00
smlng
ab6cb269ed
doc: fix UART doxygen docu
...
- move detailed description to be visible on respective module page
- see and compare other periph interfaces, i.e., GPIO, PWM ...
2017-06-06 16:05:52 +02:00
smlng
f5cd3a4496
doc: reorganize and enhance docu on common I2C periph interface
2017-06-06 16:05:47 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Thomas Eichinger
798557c32c
doc: drivers: fix doxygen warnings
2017-03-10 14:56:48 +01:00
79b2fd89bb
Merge pull request #6568 from haukepetersen/opt_periph_uarttxonly
...
periph/uart: enable to run UART in TX only mode
2017-02-24 13:01:38 +01:00
Hauke Petersen
fc6b7f0575
Merge pull request #6564 from haukepetersen/opt_periph_pwmpower
...
periph/pwm: remove pwm_(start|stop) + doc
2017-02-23 10:58:44 +01:00
Hauke Petersen
419e043c1a
periph/dac: removed DAC_NUMOF check
2017-02-22 10:30:16 +01:00
Hauke Petersen
021471e691
periph/uart: removed UART_NUMOF check
2017-02-15 09:45:06 +01:00
Hauke Petersen
0b5ca0e4c3
periph/adc: removed ADC_NUMOF check
2017-02-15 09:44:13 +01:00
Hauke Petersen
2bb3425d4b
s pwm.h: fixed doc
2017-02-13 09:37:31 +01:00
Hauke Petersen
8064bd9fa9
periph/pwm: remove pwm_(start|stop) + doc
...
- joined start/stop and poweron/poweroff
- added general documentation
2017-02-13 09:37:31 +01:00
Hauke Petersen
18fe26a5c8
periph/uart: documented TX only mode
2017-02-09 10:42:52 +01:00
Marc Poulhiès
dcff98ef56
drivers/include/periph/spi: Typo fix
...
Fix typo in inline doc.
2017-02-07 16:59:33 +01:00
Hauke Petersen
2f9e3c89e1
periph/hwrng: use void* buf for hwrng_read()
2017-02-07 13:20:39 +01:00
Marc Poulhiès
56bd36b55b
spi: doc typo
2017-01-30 13:26:01 +01:00
Hauke Petersen
4bfce892d3
drivers/periph&cpu: add and use common periph_init()
2017-01-25 16:46:46 +01:00
Hauke Petersen
37e0482e35
drivers/periph: remodeled SPI driver interface
2017-01-25 16:46:04 +01:00
Francisco Acosta
e44236d379
Merge pull request #6170 from haukepetersen/add_periph_romaddrtopage
...
drivers/flashrom: added addr-to-page function
2017-01-24 14:18:41 +01:00
d1db946188
Merge pull request #6344 from haukepetersen/opt_pm_misc
...
pm: misc cleanup and fixes
2017-01-24 14:07:36 +01:00
Hauke Petersen
af1e492552
drivers/flashpage: added addr-to-page function
2017-01-24 09:41:56 +01:00
Peter Kietzmann
72aa1569f9
Merge pull request #6231 from haukepetersen/rm_devenums_pwm
...
drivers/pwm: removed deprecated PWM_x defines
2017-01-23 10:12:11 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
Hauke Petersen
55c4477038
periph/pm: minor doc clarification
2017-01-19 11:07:59 +01:00
Hauke Petersen
a35709b4f8
Merge pull request #6360 from OlegHahm/periph_timer_remove_irq
...
periph timer: remove timer_irq_(en|dis)able
2017-01-18 22:58:21 +01:00
Hauke Petersen
3f259eaaf9
drivers/pwm: removed deprecated PWM_x defines
2017-01-18 10:11:50 +01:00
Hauke Petersen
296ca11a23
drivers/periph: removed GPIO from dev_enums.h
2017-01-16 09:31:24 +01:00
Oleg Hahm
d0316fa7ae
periph timer: remove timer_irq_(en|dis)able
2017-01-14 15:34:53 +01:00
6150e2753a
drivers: periph: pm: introduce new power management API
2017-01-12 11:24:15 +01:00
Hauke Petersen
6ab089e63e
drivers/pwm: remove PWM_NUMOF guard
...
as we do not build the periph drivers selectable currently,
the guard is triggered even for boards that do not have any
PWM defined and don't want to use it...
2016-12-15 12:18:39 +01:00
Hauke Petersen
41f453066c
drivers: added interface for writing flash pages
2016-11-30 16:51:09 +01:00
Hauke Petersen
314549059c
periph/uart: added names for return values
2016-10-28 10:31:59 +02:00
Kees Bakker
bac5cda1e3
periph/i2c: convert char to uint8_t where applicapable
...
In general, data transferred through I2C are bytes and thus should have
type uint8_t, not char.
Also convert uint8_t ptrs to void ptrs
2016-10-04 20:26:39 +02:00
Laurent Navet
f30c4ade2c
drivers/timer: fix copy/paste error
2016-09-07 21:59:25 +02:00
Joakim Nohlgård
bc9e5b218b
periph/gpio: Clean up Doxygen text
2016-07-30 08:06:19 +02:00
Laurent Navet
96ebff9174
drivers/uart: fix typos
2016-06-14 22:54:25 +02:00
Oleg Hahm
814be0655f
doc: minor fixes of typos in periph documentation
2016-05-03 23:37:22 +02:00
Hauke Petersen
9a4df61005
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-01 10:57:26 +02:00
Hauke Petersen
2515a3f9ef
drivers/gpio: changed the way the mode is configured
...
- joined pushpull and dir into one single mode parameter
- with this enabled the configuration of open-drain mode
2016-03-17 14:37:24 +01:00
Hauke Petersen
2d2126e909
drivers/uart: use uint8_t for data in cb signature
2016-03-15 10:57:44 +01:00
Hauke Petersen
40ae604c3b
drivers/dac: reworked DAC driver interface
2016-03-14 20:13:24 +01:00
Hauke Petersen
58a8884acf
drivers/periph: remodeled the ADC periph interface
2016-03-14 10:38:42 +01:00
Hauke Petersen
49ac533eba
drivers/spi: made conf and speed types overridable
2016-03-09 17:59:25 +01:00
Hauke Petersen
2b97513637
drivers/timer: added callback argument
2016-02-29 14:40:08 +01:00
Hauke Petersen
085cd48e3d
drivers/gpio: changed default type to unsigned
2016-02-17 10:27:10 +01:00
Joakim Nohlgård
e2f7ac78f0
Merge pull request #4040 from gebart/pr/periph-timer-init-freq
...
periph/timer: Change timer_init API to support arbitrary (integer) frequencies
2016-02-15 23:36:44 +01:00
Hauke Petersen
b59f94593e
drivers/periph: renamed random to hwrng + opts
2016-02-14 12:58:30 +01:00
Joakim Nohlgård
933ee91f72
drivers/periph/timer: Change timer_init definition to support arbitrary (integer) frequencies
2016-02-13 21:29:36 +01:00
Hauke Petersen
eff628ad9b
drivers/periph/pwm: modernized PWM driver interface
2016-02-12 15:52:37 +01:00
Hauke Petersen
cd71c7725f
drivers/cpuid: s/CPUID_ID_LEN/CPUID_LEN/ + fixes
2016-02-08 11:10:59 +01:00
Hauke Petersen
555c010623
drivers/gpio: added default ISR context struct
2016-01-27 17:00:23 +01:00
Joakim Nohlgård
9af084ec18
drivers/periph/uart: Add missing #include <stddef.h>
...
Required for size_t
2016-01-19 14:11:35 +01:00
Hauke Petersen
94c0cc86af
Merge pull request #4504 from PeterKietzmann/extend_gpio_api
...
periph/gpio: extend gpio API doc
2016-01-05 12:04:22 +01:00
PeterKietzmann
4c41f7a994
periph/uart: extend uart API doc
2015-12-22 16:11:21 +01:00
