Francisco Molina
5d14104056
boards: add clock configuration for cc2538
2020-03-21 19:32:23 +01:00
Francisco
b98e4bf0d1
Merge pull request #13658 from fjmolinas/pr_periph_timer_cc2538
...
cpu/cc2538: fix GPT3 IRQ definition
2020-03-20 14:31:05 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Francisco Molina
2f3a0e9b7e
boards: fix CORE_CLOCK for cc2538 based boards
2020-03-19 16:31:56 +01:00
f5a17a90fb
boards/sodaq-*: use bootloader_arduino feature
2020-03-18 10:53:17 +01:00
a2c20666f0
boards/arduino-mkr: use bootloader_arduino feature
2020-03-18 10:53:16 +01:00
c7f6d53773
boards/samd21-arduino-bootloader: add common board module
...
This module implements the 2 functions called when requesting a board 'reset in application' and 'board reset in bootloader' actions.
This module will also configure the behaviour of bossa flasher and has a dependency on USBUS CDC ACM module for providing STDIO over USB
2020-03-18 10:52:51 +01:00
7be303f12f
Merge pull request #7583 from haukepetersen/add_sam3_rtt
...
cpu/sam3: added RTT driver
2020-03-12 21:30:05 +01:00
Francisco
3153a86551
Merge pull request #11192 from aabadie/pr/tools/dfu
...
boards: include common dfu logic where applicable
2020-03-12 09:05:32 +01:00
Hauke Petersen
8f8eb86e54
boards/common/arduino-due: add RTT config+feature
2020-03-11 12:53:20 +01:00
Hauke Petersen
2e04b1d0dc
boards/common/arduione-due: add 32khz clock opt
2020-03-11 12:53:04 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Francisco
db0452201d
Merge pull request #13567 from aabadie/pr/boards/jlink_export_cleanup
...
boards: remove exports of jlink related variables
2020-03-10 18:46:58 +01:00
79431878ac
Merge pull request #13051 from dylad/pr/uart_hw_fc
...
cpu/uart: create common uart hw fc module
2020-03-10 16:41:36 +01:00
c49ad27499
boards: don't export JLINK_PRE_FLASH
2020-03-10 16:31:32 +01:00
8489a0af53
boards: don't export FLASH_ADDR
...
This variable is already export in vars.inc.mk
2020-03-10 16:31:01 +01:00
1e9879fbcf
boards: unexport JLINK_DEVICE variable
2020-03-10 16:28:03 +01:00
Francisco
6ba665858b
Merge pull request #13593 from aabadie/pr/boards/pyocd_export_remove
...
boards/pyocd: cleanup use of `export` keyword
2020-03-10 15:19:34 +01:00
Dylan Laduranty
6baf501a3d
boards/cc2538: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
Dylan Laduranty
88bb019438
boards/sam0: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
631fbd9fc8
boards/blxxxpill: rework programmer specific configuration
2020-03-10 11:42:10 +01:00
f56470925b
boards: include common dfu logic where applicable
2020-03-10 11:42:10 +01:00
benpicco
f0ac1624c5
Merge pull request #13594 from aabadie/pr/tools/cc2538-bsl_rework
...
tools/cc2538-bsl: deduplicate buildsystem integration
2020-03-09 19:39:43 +01:00
b4418426ba
boards/cc2538: use common cc2538-bsl handling file
2020-03-09 18:26:08 +01:00
2ec09ebd74
boards/nrf52: remove useless export of FLASH_TARGET_TYPE
2020-03-08 15:12:44 +01:00
Marian Buschsieweke
8fd8c8273f
boards/{nucleo-f103rb,b*pill}: Expose JTAG pins as GPIOs
...
The Nucleo-F103RB comes with an internal SWD programmer/debugger. Thus, the JTAG
pins are not going to be used for debugging / programming anyway. The pins are
exposed on the headers, so allowing them to be used as GPIOs make a lot of
sense.
The Bluepill / Blackpill boards only expose the SWD pins on the debug header,
but the JTAG pins (not also used by SWD) are exposed on the GPIO pin headers.
Hence, exposing them as regular GPIOs seems to be a reasonable choice.
2020-03-08 13:06:34 +01:00
benpicco
7396d05605
Merge pull request #13575 from fjmolinas/pr_cc2538_rf_deps
...
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 18:00:51 +01:00
Francisco Molina
80ecac5fde
boards: use cc2538_rf as netdev_default for CPU=cc2538
2020-03-06 14:17:52 +01:00
Francisco Molina
ff6f6618fb
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 14:17:19 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
eafba65911
boards/common/arduino-atmega: add ztimer configuration
2020-03-04 12:44:03 +01:00
benpicco
7792f91ddc
Merge pull request #13535 from btcven/2020_03_02-cc1312-openocd
...
boards/cc1312-launchpad: add OpenOCD configuration
2020-03-04 00:26:14 +01:00
Jean Pierre Dudey
ca2e2a4289
boards/cc1312-launchpad: add OpenOCD configuration
...
This enables OpenOCD for the CC1312 LaunchPad.
All we need is:
- The Texas Instruments version of OpenOCD
(https://git.ti.com/cgit/sdo-emu/openocd )
- Set the `PROGRAMMER` environment variable to `openocd`.
- Connect a cc1312-launchpad and play with the commands.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-03-03 13:42:29 -05:00
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
2722869dbb
boards/arduino-due: don't export BOSSA_ARDUINO_PREFLASH
2020-03-03 14:18:03 +01:00
bd81060354
boards/{telosb,iotlab}: remove useless export for BAUD
...
The variable is already eported in serial.inc.mk
2020-03-03 14:18:03 +01:00
Francisco
3f062a78b2
Merge pull request #13045 from aabadie/pr/boards/remote_factorize
...
boards/remote*: cleanup and factorize code in peripheral configuration headers
2020-03-03 13:21:04 +01:00
481f3bcb35
Merge pull request #13180 from fjmolinas/pr_slwstk6000b_cleanup
...
boards/slwstk6000b-*: cleanup
2020-03-03 13:15:03 +01:00
f1ba22534a
boards: don't export globally OPENOCD_RESET_USE...
2020-03-03 11:42:19 +01:00
Francisco Molina
86ed76fec0
boards/common/slwstk6000b: remove unused files
2020-03-03 11:24:28 +01:00
Francisco Molina
e951b720b8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse JLINK_DEVICE
2020-03-03 11:24:27 +01:00
Francisco Molina
22aae93efb
boards/common/slwstk6000b: cleanup slwrb41* includes
2020-03-03 11:24:26 +01:00
Francisco Molina
b7783e67a8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse CPU_MODEL
2020-03-03 11:24:26 +01:00
Francisco Molina
96cfa1d41c
boards/common/slwstk6000b: add module variables makefile
2020-03-03 11:22:48 +01:00
Karl Fessel
979b4d5cf7
Revert "boards/nucleo-f767zi: add correct flash bank openocd config"
...
This reverts commits:
- 1dec5ba61b53f60db66f
2020-02-28 13:51:58 +01:00
0d468c1068
boards/common/silabs: remove OPENOCD_CONFIG export
2020-02-25 17:26:00 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
d41621e95f
boards/arduino-due: force bossa 1.8 version
2020-02-25 11:49:10 +01:00
