- stm32f7 use sectors instead of pages, they go either from 16KB to
128KB, or from 32KB to 25KB. Smaller sectors are at the begining of
the flash. Slots must start at the begining of a sector to not overlap.
- Minimum required RIOBOOT_HDR_LEN or stm32f7 is 0x200
to respect vector table alignment
- Add CPU_FLASH_BASE
- stm32f2 uses sectors instead of pages, they go from 16KB to
128KB. Smaller sectors are at the begining of the flash. Slots
must start at the begining of a sector to not overlap.
- Minimum required RIOBOOT_HDR_LEN or stm32f2 is 0x200
to respect vector table alignment
- Stm32f4 use sectors instead of pages. They go from 16 KB to 128KB.
The bootloader will use the first sector(16Kb). Slots must start
at the begining of a sector to not overlap.
- Minimum required RIOBOOT_HDR_LEN or stm32f4 is 0x200
to respect vector table alignment
The option value length of Ethernet addresses can be more than 6 byte in lwIP. Therefore, the max_len parameter is check to be greater than or equal to ETHERNET_ADDR_LEN.
Module esp_idf_heap is enabled in cpu/esp32/Makefile.dep depending on other modules. Since cpu/esp32/Makefile.dep is read after cpu/esp32/Makefile.include, the conditional definition of the linker options for the wrapper functions had to be moved from cpu/esp32/Makefile.include to cpu/esp32/Makefile.dep.
If module esp_idf_heap is used, the memory management functions _malloc_r, _realloc_r, _calloc_r and _free_r have to be overridden by wrapper functions to use the heap_* functions of module _esp_idf_heap. However, this can lead to multiple symbol errors for these functions for some applications. To solve this symbol conflict, _malloc_r, _realloc_r, _calloc_r and _free_r functions are renamed to __wrap_* and the linker options are extended by -Wl,-wrap option when module esp_idf_heap is used.
When standard C libraries are added to BASELIBS to group them together with all other modules, there are multiple definitions for the putchar function. The one that is defined writing to the UART as standard output and the one that is provided by the standard C libraries. To solve this symbol conflict, putchar and getchar functions that use the UART as standard output/input are renamed to __wrap_putchar and __wrap_getchar and the linker options are extended by -Wl,-wrap option.
When linking an application, symbol pthread_setcancelstate is not known in standard C libraries, even if the pthread module is linked. This is because the pthread module is grouped with all other modules, but not with the default C libraries when they are added to LINK_FLAGS. Therefore, standard C libraries have to be added also to BASELIBS to group them with all other modules.
Fixes the problem that the compilation of an applications can throw unknown symbol errors for functions that aren't use at all. Thus, it is possible to remove the warning for unknown symbols and the compilation can abort if there are real unknown symbols.
- remove old header files
- fix new DMA header file macro definitions
- remove old cpu type groups (STM32L1XX_MD, STM32L1XX_MDP,
STM32L1XX_HD, STM32L1XX_XL)
- The __NOP() that was added in #8518 is now remooved.
- When DBG_STANDBY, DBG_STOP or DBG_SLEEP are set in DBG_CR a hardfault
occurs on wakeup from sleep. This was first diagnosed in #8518. When
enabled, a hardfault occured when returning from a branch to irq_restore()
we avoid the call by inlining the function call. See #11830 for more
details.
-include will throw no error if sam0_common/Makefile.features does not exist.
This may not have been intentional as none of the other sam0 implementations
do this.
Replace it with a normal include.
Currently the configuration claims that external interrupt INT4 is present on
pin PE7. However, the ATmega32U4 datasheet (section 10.3.4 page 81) contains
the following remark to pin PE7: "Not present on pin-out". This commit removes
the PE7 from the interrupt config.
- Moved VIC.c to irq_arch.c for consistent naming scheme
- Removed unused functions IRQenabled, disableFIQ, restoreFIQ, enableFIQ
- There is not header for those functions, so they *cannot* be used
- These is obviously no user, as they *cannot* be used
- There is absolutely no documentation what they would be used for
The `mips32r2_generic` CPU was only used by the `mips-malta` board which has
been removed. The reasons for this removal are the same as for the board:
- No hardware to test.
- The board that used this CPU is not available off the shelf.
- No UART input.
- No integrated flasher (one needs to use a separate Windows tool)
For more information and discussion around MIPS, see issues:
- #11831 (Removal of mips-malta)
- #11788 (General MIPS removal)
cpu/stm32_common: cleanup periph eth
boards/nucleo-f767zi: cleanup dependencies
boards/nucleo-f767zi: fix dma configuration attribute for eth
examples/default: add nucleo-767zi in boards with netif
drivers/stm_32_eth: Add header guard for eth_config
Co-authored-By: Robin <robin@chilio.net>
stm32eth: Move to stm32_common periph
cpu/stm32_periph_eth: Rebase to current master branch
- Update DMA to use new vendor headers
- Update send to use iolist. It looks like the packet headers are now transfered as seperate iolist entries which results in the eth periph sending each header as own packet. To fix this a rather ugly workaround is used where the whole iolist content is first copied to a static buffer. This will be fixed soon in another commit
- If MAC is set to zero use luid to generate one
- Small code style fixes
cpu/stm312f7: Add periph config for on-board ethernet
boards/nucleo-f767zi: Add config for on board ethernet
tests/stm32_eth_lwip: Remove board restriction
boards/common/nucleo: Add luid module if stm32 ethernet is used
tests/stm32_eth_gnrc: Add Testcase for gnrc using the stm32 eth periph
stm32_eth: Rework netdev driver layour
tests/stm32_eth_*: Use netdev driver header file for prototypes
stm32_eth: Add auto init for stm32 eth netdev driver
boards/stm32: Enable ethernet conf for nucleo boards
stm32_eth_auto_init: Add dont be pendantic flag
stm32_eth: Remove dma specific stuff from periph_cpu.h
Looks like this was implemented in PR #9171 and 021697ae94 with the same interface.
stm32_eth: Remove eth feature from stm32f4discovery boards
stm32_eth: Migrate to stm32 DMA API
stm32_eth: Add iolist to module deps
stm32_eth: Rework send function to use iolist
stm32_eth: Fix ci build warnings
stm32_eth: Fix bug introduced with iolist usage
stm32_eth: Remove redundant static buffer
stm32_eth: Fix feature dependencies
stm32_eth: Fix wrong header guard name
stm32_eth: Implement correct l2 netstats interface
stm32_eth: Rename public functions to stm32_eth_*
stm32_eth: Fix doccheck
stm32_eth: Move register DEFINE to appropriate header file
stm32_eth: remove untested configuration for f446ze boards
stm32_eth: Move periph configuration struct to stm32_common
stm32_eth: Fix naming of eth_phy_read and eth_phy_write
stm32_eth: Remove obsolete test applications
drivers/eth-phy: add generic Ethernet PHY iface
cpu/stm32f4: implement eth driver peripheral
This implements the ethernet (MAC) peripheral of the stm32f4 as a
netdev driver.
boards/stm32f4discovery: add eth configuration
boards/stm32f4discovery: add feature stm32_eth
tests/stm32_eth_lwip: add test application
- EOP bit is cleared by writing 1 to the register.
- Guard EOP bit clear for STM32F2, STM32F4, STM32F7
and STM32L4 EOP bit is only set if EOPIE is enabled.
Since this is not the case for any platform we exclude
it when not needed.
- With this PR, On start up all GPIOs are configured as AIN. For stm32l0/4
this is done by default. Doing this saves the consumption of the input Schmitt
trigger in STOP mode which can reduce the consumption in at least 70%
from current master.
- The PNB in FLASH_CR wasn't cleared before every erase operation
and the new value was just stacked on top. After a couple of erase
the PNB written was overlapping with old ones failing to erase the
correct page.
In the `pwm_set` function, the switch-on and switch-off times for PWM channels were only determined for the following phase, but not for the current phase. This could result in a missing duty cycle when calling the function `pwm_set` if the switch-on time of the current phase was not yet reached or to an extended duty cycle if the switch-off time of the current phase had not yet been reached.
