19037: sys/usb, pkg/tinyusb: move USB board reset from highlevel STDIO to CDC ACM r=dylad a=gschorcht
### Contribution description
The USB board reset function `usb_board_reset_coding_cb` can be used on any CDC-ACM interface, even if the CDC ACM interface is not used as high-level STDIO. Therefore, this PR provides the following changes:
- The call of the board reset function `usb_board_reset_coding_cb` from USBUS stack has been moved from the STDIO CDC ACM implementation to the CDC ACM implementation and is thus a feature of any USBUS CDC ACM interface which does not necessarily have to be used as highlevel STDIO.
- The call of the board reset function `usb_board_reset_coding_cb` from tinyUSB stack been moved from module `tinyusb_stdio_cdc_acm` to module `tinyusb_contrib` and is compiled in if the `tinyusb_class_cdc` module is used together the `tinyusb_device` module. Thus, it is now a feature of the tinyUSB CDC ACM interface, which does not necessarily have to be used as highlevel STDIO.
- The `usb_board_reset` module defines the `usb_board_reset_in_bootloader` function as a weak symbol to be used when reset in bootloader if no real implementation of this function is compiled in and the `riotboot_reset` module is not used. It only prints an error message that the reset in bootloader is not supported. This is necessary if the module `usb_board_reset` is used to be able to restart the board with an application via a USB CDC ACM interface, but the board's bootloader does not support the reset in bootloader feature.
- A test application has been added that either uses the highlevel STDIO `stdio_acm_cdc` or creates a CDC-ACM interface to enable board resets via USB. If the `usbus_dfu` module is used, it also initializes the DFU interface to be able to work together with the `riotboot_dfu` bootloader.
### Testing procedure
1. Use a board with a bootloader that supports the reset in bootloader via USB, but don't use the highlevel STDIO to check that it works with `usbus_cdc_acm`, for example:
```python
USEMODULE=stdio_uart BOARD=arduino-mkr1000 make -C tests/usb_board_reset flash
```
After reset in application with command
```python
stty -F /dev/ttyACM0 raw ispeed 600 ospeed 600 cs8 -cstopb ignpar eol 255 eof 255
```
command `dmesg` should give an output like the following with RIOT's test VID/PID:
```python
dmesg
[1745182.057403] usb 1-4.1.2: new full-speed USB device number 69 using xhci_hcd
[1745182.160386] usb 1-4.1.2: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
[1745182.160390] usb 1-4.1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[1745182.160392] usb 1-4.1.2: Product: arduino-mkr1000
[1745182.160393] usb 1-4.1.2: Manufacturer: RIOT-os.org
[1745182.160395] usb 1-4.1.2: SerialNumber: 6B6C2CA5229020D8
[1745182.170982] cdc_acm 1-4.1.2:1.0: ttyACM0: USB ACM device
```
After reset in bootloader with command
```python
stty -F /dev/ttyACM0 raw ispeed 1200 ospeed 1200 cs8 -cstopb ignpar eol 255 eof 255
```
command `dmesg` should give an output like the following with vendor VID/PID:
```python
[1746220.443792] usb 1-4.1.2: new full-speed USB device number 70 using xhci_hcd
[1746220.544705] usb 1-4.1.2: New USB device found, idVendor=2341, idProduct=024e, bcdDevice= 2.00
[1746220.544708] usb 1-4.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[1746220.553471] cdc_acm 1-4.1.2:1.0: ttyACM0: USB ACM device
```
2. Test the same as in 1., but this time use the highlevel STDIO to check that there is no regression and it still works with `stdio_cdc_acm`, for example:
```python
BOARD=arduino-mkr1000 make -C tests/usb_board_reset flash
```
3. Use a board that supports `riotboot_dfu` but doesn't use the highlevel STDIO and flash the `riotboot_dfu` bootloader, for example:
```python
BOARD=stm32f429i-disc1 make -C bootloaders/riotboot_dfu flash term
```
Once the bootloader is flashed, command `dfu-util --list` should give something like the following:
```python
Found DFU: [1209:7d02] ver=0100, devnum=14, cfg=1, intf=0, path="1-2", alt=1, name="RIOT-OS Slot 1", serial="6591620BCB270283"
Found DFU: [1209:7d02] ver=0100, devnum=14, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS Slot 0", serial="6591620BCB270283"
```
If the output gives only
```python
Found Runtime: [1209:7d00] ver=0100, devnum=123, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS bootloader", serial="6591620BCB270283"
```
an application is already running in DFU Runtime mode. Use `dfu-util -e` to restart it in bootloader DFU mode.
Then flash the test application, for example:
```python
FEATURES_REQUIRED=riotboot USEMODULE='usbus_dfu riotboot_reset' \
BOARD=stm32f429i-disc1 make -C tests/usbus_board_reset PROGRAMMER=dfu-util riotboot/flash-slot0
```
Once the test application is flashed, command `dfu-util --list` should give:
```python
Found Runtime: [1209:7d00] ver=0100, devnum=123, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS bootloader", serial="6591620BCB270283"
```
Now, use command
```python
stty -F /dev/ttyACM1 raw ispeed 600 ospeed 600 cs8 -cstopb ignpar eol 255 eof 255
```
to restart the board in application. Command `dfu-util --list` should give again the following:
```python
Found Runtime: [1209:7d00] ver=0100, devnum=123, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS bootloader", serial="6591620BCB270283"
```
That is, the application is running in DFU Runtime mode. Then use command
```python
stty -F /dev/ttyACM1 raw ispeed 1200 ospeed 1200 cs8 -cstopb ignpar eol 255 eof 255
```
to restart the board in bootloader DFU mode. Command `dfu-util --list` should now give the following:
```python
Found DFU: [1209:7d02] ver=0100, devnum=50, cfg=1, intf=0, path="1-2", alt=1, name="RIOT-OS Slot 1", serial="7D156425A950A8EB"
Found DFU: [1209:7d02] ver=0100, devnum=50, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS Slot 0", serial="7D156425A950A8EB"
```
That is, the bootloader is in DFU mode and another application can be flash.
4. After a hard reset of the board under 3., try the commands `reboot` and `bootloader`.
5. To check the same for tinyUSB, use the existing tinyUSB application with a CDC ACM interface and add module `usb_board_reset`, for example:
```python
USEMODULE=usb_board_reset BOARD=stm32f429i-disc1 make -C tests/pkg_tinyusb_cdc_msc flash term
```
After flashing, it should be possible to restart the application with command:
```python
stty -F /dev/ttyACM1 raw ispeed 600 ospeed 600 cs8 -cstopb ignpar eol 255 eof 255
```
When using command
```python
stty -F /dev/ttyACM1 raw ispeed 1200 ospeed 1200 cs8 -cstopb ignpar eol 255 eof 255
```
the following error message should be shown in terminal
```python
[cdc-acm] reset in bootloader is not supported
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18756: drivers/usbdev_synopsys_dwc2: add EFM32 support r=chrysn a=gschorcht
### Contribution description
This PR provides the changes for the Synopsys USB OTG IP core DWC2 driver for EFM32 MCUs. It also provides the changes of the board definition for `stk3600` and `stk3700` for testing.
### Testing procedure
`tests/usbus_hid` should work on the EFM32 boards `stk3600` (EFM32LG family) and `stk3700` (EFM32GG family).
It is already tested for a `sltb009a` board (EFM32GG12 family).
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19023: pkg/tinyusb: fix Kconfig problems r=maribu a=gschorcht
### Contribution description
This PR tries to fix the [problems with `tinyUSB` in nightlies](https://ci.riot-os.org/details/d11b383ba0cd45048ed6f8d98abbc0de).
- The `tinyusb_device` feature had to be moved from `boards/common/arduino-zero` definition to the `boards/arduino-zero` definition because the common `arduino-zero` features are also used by `wemos-zero` which uses the `highlevel_stdio` feature via the `stdio_cdc_acm` module.
- The `tinyusb_device` feature had to be removed from Kconfig of board `stm32f429i-disco` since it uses the `highlevel_stdio` feature via the `stdio_cdc_acm` module.
### Testing procedure
Green CI
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19012: boards/arduino-mega2560: add TTY_BOARD_FILTER r=gschorcht a=maribu
### Contribution description
This allows automatically selecting TTY actually belonging to an
Arduino Mega2560 if `MOST_RECENT_PORT=1` is set.
### Testing procedure
```
make BOARD=arduino-mega2560 MOST_RECENT_PORT=1 -C examples/default flash term
```
Should automatically select the TTY of the most recently connected Arduino Mega2560, even if a board of a different type is connect more recently.
### Issues/PRs references
- [x] depends on (and includes) https://github.com/RIOT-OS/RIOT/pull/19011
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This allows automatically selecting TTY actually belonging to an
Arduino Mega2560 if `MOST_RECENT_PORT=1` is set.
Note: Unless `ARDUINO_MEGA2560_COMPAT_WITH_CLONES` is set to `0`,
this will fall back to detecting any cheap USB UART bridge typically
found in Arduino Mega 2560 clones if no genuine Arduino Mega is found.
The `tinyusb_device` feature introduced with PR #18689 has to be moved from `common/arduino-zero` definition to the `arduino-zero` definition because the common `arduino-zero` features are also used by `wemos-zero` which uses `highlevel_stdio` feature via the `stdio_cdc_acm` module.
weact-f4xcx boards have only a single USB-C connector that is used for `highlevel_stdio` via USBUS CDC ACM so that it conflicts with tinyUSB for the moment.
The `channels` member should not be set to the number of hardware
channels *n*, but to *n* - 1 instead. The last channel is implicitly
used in `timer_read()`. Hence out of *n* hardware channels, only *n* - 1
are available to the application.
This fixes a bug introduced by 4d02e15247
which incorrectly set the channel number to *n* rather than to
*n* - 1.
