Bas Stottelaar
b9b8358175
boards/stk3700: add documentation
2020-01-13 23:36:29 +01:00
Bas Stottelaar
aeed1f3153
boards/slwstk6000b: add documentation
2020-01-13 23:31:51 +01:00
Bas Stottelaar
8a98bf5260
boards/ikea-tradfri: add board documentation.
2020-01-13 21:40:00 +01:00
Leandro Lanzieri
50f1b1423a
Merge pull request #12999 from fjmolinas/pr_native_makefile_include_explicit_path
...
boards: use explicit paths for file inclusion
2020-01-13 16:00:48 +01:00
Francisco Molina
74cecf30f0
boards/common/arduino-mkr: remove /Makefile.dep
...
Makefile.dep is already included for the board no need to do it here.
2020-01-13 11:53:48 +01:00
Francisco Molina
5a8f996111
boards: replace use of $(BOARD) by explicit name
...
With the introduction of BOARDSDIR external boards can re-use common
code of BOARDS present in RIOTBASE. To be able to do this file
references may not use $(BOARD) since BOARD will be set by the
external BOARD.
2020-01-13 11:53:48 +01:00
MichelRottleuthner
53cb3b087c
Merge pull request #9530 from Hyungsin/forupstream_xtimer
...
sys: xtimer concurrency/robustness improvement
2020-01-13 08:24:15 +01:00
Sören Tempel
e2b8231796
boards/native: fix crash with all-asan
...
Without this change a RIOT application compiled with all-asan will
segfault as RIOT provides its own malloc by default. Add a define for
disabling custom malloc, calloc and realloc implementations and use it
when compiling with all-asan.
2020-01-12 16:17:48 +01:00
8405fbe611
boards/hifive1*: provide and configure SPI feature
2020-01-11 13:06:39 +01:00
b3658ad95e
boards/hifive1b: provide i2c configuration
2020-01-11 13:06:10 +01:00
Hyungsin
6eed5b9d43
remove XTIMER_OVERHEAD
2020-01-10 13:22:11 -08:00
b42cf186fe
boards/hifive1*: remove gpio interrupt definition
...
This macro is now defined in periph_cpu.h
2020-01-10 16:41:33 +01:00
473f1d7147
boards/hifive1*: cleanup board initialization
2020-01-10 16:41:33 +01:00
97ef5d53de
boards/hifive1*: rework clock configuration
2020-01-10 16:41:33 +01:00
39cf4d38c1
boards/hifive1*: move xtimer definitions to board.h
2020-01-10 16:41:32 +01:00
Yegor Yefremov
8101f52e3f
boards/esp32: add TTGO T-Beam board definition
...
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-01-10 10:04:38 +01:00
267e273c56
boards/hifive1b: set custom reset delay of 1s for tests
2020-01-10 08:34:45 +01:00
ce0bb35587
Merge pull request #12993 from fjmolinas/pr_cc2538_rtt
...
cpu/cc2538: add periph_rtt
2020-01-08 09:55:45 +01:00
Francisco Molina
b436ba4a0c
boards/common/remote: add periph_rtt
2020-01-08 09:16:49 +01:00
Francisco Molina
59ada62930
boards/openmote-b: add periph_rtt
2020-01-08 09:16:49 +01:00
748ffff931
boards/nrf52: remove use of export for LINKER_SCRIPT
2020-01-03 16:07:15 +01:00
c71e931d77
boards/native: remove use of export for LINKFLAGS
2020-01-02 09:47:33 +01:00
kcant
3a29d346ef
Relink wiki.stm32duino.com to web.archive.org ( #13011 )
...
wiki.stm32duino.com broken links correction
2019-12-28 18:39:22 +01:00
kcant
f770c6fffd
Update doc.txt
...
Broken links correction to https://web.archive.org/web/20190428082446/ *
2019-12-28 18:38:27 +01:00
dylad
fc9549b069
boards/sam0: update sam0-based board to use hw fc
2019-12-20 21:26:56 +01:00
876824201c
boards/hifive1*: apply new UART configuration scheme
2019-12-20 15:22:09 +01:00
326d570b11
Merge pull request #12990 from fjmolinas/pr_b-l475e-iot01a_assert_srst
...
boards/b-l475e-iot01a: set OPENOCD_RESET_USE_CONNECT_ASSERT_SRST
2019-12-19 15:10:08 +01:00
Francisco Molina
b4a8cf8351
boards/b-l475e-iot01a: set OPENOCD_RESET_USE_CONNECT_ASSERT_SRST
...
b-l475e-iot01a can become unflashable when hardfaults occure.
To make sure flashing succeeds `connect_assert_srst` is called
before connecting to flash through openocd.
2019-12-19 14:21:27 +01:00
Hauke Petersen
3330676fd5
boards/nrf52840dk: disable UART HWFC
2019-12-18 11:53:26 +01:00
Francisco
927b03f0ff
Merge pull request #12902 from aabadie/pr/boards/hifive1b_arduino
...
boards/hifive1b: add arduino feature
2019-12-16 13:31:17 +01:00
0ef371899d
boards/hifive1b: add arduino feature
2019-12-13 16:25:11 +01:00
Hauke Petersen
d0375ea119
boards/native: fix default value of PORT
2019-12-13 11:36:57 +01:00
benpicco
03b95ef833
Merge pull request #12883 from fabian18/microduino-corerf-doc-pin-mapping
...
boards/microduino-corerf: doc SPI and I2C pin mapping
2019-12-05 21:14:05 +01:00
fabian18
f3f4c3b4b8
boards/microduino-corerf: doc SPI and I2C pin mapping
2019-12-05 19:43:35 +01:00
e5d5892167
boards/hifive1*: remove periph_gpio provided features
...
There are now provided at cpu level
2019-12-05 15:27:12 +01:00
Marian Buschsieweke
cf0fb1dff1
Merge pull request #12868 from benpicco/lpc2k-fix
...
lpc2k_pgm: fix build warnings, add lpc2388
2019-12-05 13:02:19 +01:00
Benjamin Valentin
472373637c
boards/microduino-corerf: enable RTT
...
The board *does* have a crystal oscillator connected, so we can
enable RTT.
2019-12-04 22:45:18 +01:00
Benjamin Valentin
e958798225
boards/microduino-corerf: use 115200 baud for stdio
...
The MCU can handle that baud rate just fine.
A standard baud rate is much easier to use than those awkward 57600 baud.
2019-12-04 22:43:41 +01:00
Benjamin Valentin
9ce34bb305
lpc2k_pgm: fix build warnings
...
GCC now warns when snprintf()ing a buffer that, together with the
format string, might be larger than the destination buffer.
To fix this increase the size of the destination buffer so that
the source buffer and the format string will always fit - 32 bytes
are enough.
2019-12-03 22:09:29 +01:00
Benjamin Valentin
a57f380259
lpc2k_pgm: add LPC2388
...
The device is very simmilar to the LPC2387
2019-12-03 22:09:20 +01:00
Martine Lenders
2f74d9d644
Merge pull request #12517 from miri64/native/enh/reset-command
...
native: allow for native to be resetable via SIGUSR1
2019-12-03 10:56:11 +01:00
Martine Lenders
d670f77d91
native: add and use reset script to reset certain PID
2019-12-03 09:51:52 +01:00
Benjamin Valentin
6f41ecc74b
boards: ATmega: enable periph_rtt for boards with 32kHz crystal
...
The RTT on ATmega only works if the board provides a 32kHz oscillator.
2019-12-01 17:26:24 +01:00
MrKevinWeiss
ebe010125b
boards/openmote-b: fix button pin define
...
According to the schematics user button should be on `PD5` not `PC5`
(so `GPIO_PIN(3, 5)`).
Due to the super high values resistors being used for the external
pullup it seems if you use a internal pullup it doesn't work.
2019-11-29 11:10:24 +01:00
Benjamin Valentin
70eef51cd8
boards/openmote-b: fix naming of RF24 switch pins.
...
The Sub-GHz Antenna of the Openmote-B is always connected to the AT86RF215.
It is the 2.4 GHz radial that can be switched between the CC2538 and the AT86RF215.
This changes the name of the defines accordingly.
2019-11-29 10:59:59 +01:00
benpicco
e81d040a26
Merge pull request #12799 from chudov/derfmega-PR
...
boards/derfmega*: initial support
2019-11-28 13:57:56 +01:00
chudov
0a151a78da
boards/derfmega*: initial support
2019-11-27 20:53:14 +01:00
Benjamin Valentin
0d977b3b3c
cpu/sam0_common/periph/uart: implement buffered write
...
Implement interrupt based uart_write() using a tsrb for the TX buffer.
To enable it, add
USEMODULE += periph_uart_nonblocking
to your Makefile.
2019-11-27 19:01:00 +01:00
Francisco Molina
90bcb016bb
boards: unexport PROGRAMMER
2019-11-27 14:31:01 +01:00
743d7170e2
Merge pull request #12804 from wosym/nucleo-f207zg_ethernet
...
boards/nucleo-f207zg: add ethernet configuration
2019-11-26 12:44:19 +01:00
Wouter
3072900ed6
boards/nucleo-f207zg: add Ethernet config
2019-11-26 11:11:41 +01:00
benpicco
7f40b13d05
Merge pull request #12697 from maribu/stm32-programmer
...
boards: Common STM32 programmer/debugger/serial config
2019-11-25 15:27:22 +01:00
4d0d52dd0e
boards/z1: fix typos
2019-11-23 22:39:35 +01:00
5468ab41bd
boards/yunjia-nrf51822: fix typos
2019-11-23 22:39:35 +01:00
a8351a7296
boards/thingy52: fix typos
2019-11-23 22:39:35 +01:00
02b1cf170f
boards/telosb: fix typos
2019-11-23 22:39:35 +01:00
be61dbe2ac
boards/stm32l0538-disco: fix typos
2019-11-23 22:39:35 +01:00
97a18f9114
boards/stm32f723e-disco: fix typos
2019-11-23 22:39:35 +01:00
9b6ae21817
boards/sensebox_samd21: fix typos
2019-11-23 22:39:35 +01:00
11073a73e1
boards/saml21-xpro: fix typos
2019-11-23 22:39:35 +01:00
f69af0edda
boards/remote-revb: fix typos
2019-11-23 22:39:35 +01:00
4e06b71e8d
boards/remote-reva: fix typos
2019-11-23 22:39:35 +01:00
081f1e80e7
boards/remote-pa: fix typos
2019-11-23 22:39:35 +01:00
ef3b8b15e0
boards/p-l496g-cell02: fix typos
2019-11-23 22:39:35 +01:00
9f2aa74635
boards/nucleo-l4r5zi: fix typos
2019-11-23 22:39:07 +01:00
147696a0fc
boards/msba2: fix typos
2019-11-23 22:39:07 +01:00
daffa544a2
boards/microbit: fix typos
2019-11-23 22:39:07 +01:00
f61175219b
boards/mbed_lpc1768: fix typos
2019-11-23 22:39:07 +01:00
edfa34303b
boards/lsn50: fix typos
2019-11-23 22:39:07 +01:00
e6d3963cd4
boards/iotlab-m3: fix typos
2019-11-23 22:39:07 +01:00
60e2ce8702
boards/frdm-k64f: fix typos
2019-11-23 22:39:07 +01:00
5a4bad8dfa
boards/fox: fix typos
2019-11-23 22:39:07 +01:00
a394fcd100
boards/esp32-wrover-kit: fix typos
2019-11-23 22:39:07 +01:00
8e52d30949
boards/esp32-wroom-32: fix typos
2019-11-23 22:39:07 +01:00
fbc54466f8
boards/esp32-wemos-lolin-d32-pro: fix typos
2019-11-23 22:39:07 +01:00
557f005cb1
boards/esp32-olimex-evb: fix typos
2019-11-23 22:39:07 +01:00
dcd48cbd23
boards/esp32-mh-et-live-minikit: fix typos
2019-11-23 22:39:07 +01:00
4fb244d415
boards/common: fix typos
2019-11-23 22:39:07 +01:00
6a191fe9ff
boards/cc2650stk: fix typos
2019-11-23 22:39:07 +01:00
b0f1e3dbb9
boards/blackpill-128kib: fix typos
2019-11-23 22:39:07 +01:00
90964e4398
boards/blackpill: fix typos
2019-11-23 22:39:07 +01:00
196cf2d776
boards/arduino-leonardo: fix typos
2019-11-23 22:39:07 +01:00
723707b7fa
boards/airfy-beacon: fix typos
2019-11-23 22:39:07 +01:00
benpicco
d244b0fe59
Merge pull request #12787 from gschorcht/cpu/esp32/netdev_default
...
cpu/esp*: define esp_now as default netdev
2019-11-23 14:59:54 +01:00
Gunar Schorcht
72967f8fc3
cpu/esp32: GNRC_NETIF_NUMOF is handled in CPU makefile
...
Since Makefile.dep files are included as last files multiple times to resolve all module dependencies, GNRC_NETIF_NUMOF is handled here.
2019-11-22 17:38:35 +01:00
Francisco
3c60afc083
Merge pull request #12768 from aabadie/pr/boards/pic32-clicker-uart-cleanup
...
boards/pic32-clicker: cleanup uart configuration and initialization, cleanup header includes
2019-11-22 17:20:40 +01:00
Hauke Petersen
96c6313bd4
boards/avr-rss2: use bme280_i2c module
2019-11-22 14:04:38 +01:00
Hauke Petersen
f46731801a
boards/sltb001a: use i2c mode of bme280 driver
2019-11-22 14:04:37 +01:00
Hauke Petersen
3c0d5048f9
board/ruuvitag: enable bme280 for saul default
2019-11-22 14:04:37 +01:00
401abd5b71
boards/pic32-clicker: cleanup includes
2019-11-22 08:12:47 +01:00
e8b0399bc9
boards/pic32-clicker: cleanup uart initialization
2019-11-22 08:12:46 +01:00
Gunar Schorcht
a05027cdba
Merge pull request #12523 from aabadie/pr/sys/arduino_pwm
...
sys/arduino: add implementation for analogWrite
2019-11-21 15:08:10 +01:00
4337cb316f
Merge pull request #12752 from gschorcht/cpu/esp32/espreset
...
boards/esp32*: use espreset tool for reset in make test
2019-11-20 22:07:15 +01:00
Robert Olsson
c903bc8c1b
boards/avr-rss2: add AtMega256RFR2 based board
...
Co-Authored-By: benpicco <benpicco@googlemail.com>
Support: Alexandre Abadie aabadie, Marian Buschsieweke maribu, Martine Lenders miri64
2019-11-20 11:57:02 +01:00
Gunar Schorcht
5ba4a7d7cf
boards/esp32*: espreset tool added
2019-11-20 08:33:47 +01:00
benpicco
1999e2f89c
Merge pull request #12745 from benpicco/atmega-led_fix
...
boards/atmega_common: remove weak led_init()
2019-11-20 00:14:48 +01:00
benpicco
cfcbb76cd2
Merge pull request #12729 from maribu/atmega1284p
...
boards/atmega1284p: Add ATmega1284P as board
2019-11-19 23:18:31 +01:00
Hauke Petersen
04dcc3662b
Merge pull request #12344 from chrysn-pull-requests/particle-antenna-switch
...
particle-*: Configure antenna switch
2019-11-19 23:06:29 +01:00
Benjamin Valentin
c277100dd9
boards/atmega_common: remove weak led_init()
...
`led_init()` is already protected by an `#ifdef`, so no need for
the weak symbol.
The problem is that the weak function does not get overridden, even when
the board provides it's own led_init(), resulting in no LEDs being
initialized.
2019-11-19 22:36:07 +01:00
Marian Buschsieweke
b7150ed6c7
boards/common/atmega: Added ATmega1284P PWM conf
...
Added PWM configuration for the ATmega1284P CPU; this can be reused for every
board featuring that CPU.
2019-11-18 23:46:08 +01:00
