Benjamin Valentin
3ae7bb425b
boards/msba2: update SPI configuration
2020-01-31 12:01:09 +01:00
Sören Tempel
8485c535d5
waspmote-pro: don't build the boards_common_atmega module
...
Only include its headers. Without this change board_init would be
defined twice. Once in `boards/waspmote-pro/board.c` and the other time
`boards/common/atmega/board.c`.
2020-01-29 12:32:16 +01:00
98995f685b
Merge pull request #13179 from fjmolinas/pr_openocd_stm32f7_probe
...
boards/nucleo-f767zi: add correct flash bank openocd config
2020-01-28 10:48:23 +01:00
Francisco Molina
1dec5ba61b
boards/common/stm32f7: add correct flash bank configuration
...
openocd configuration file for `stm32f7` relies on probing to find out
FLASH_ADDR. On nucleo-f767zi board probing (`flash probe 0`) fails when
`srst` is asserted, but `srst` needs to be asserted to be able to flash
the `BOARD` when sleeping or after a hardfault.
To circumvent this in boards/common/stm32/dist/stm32f7.cfg we define a new
flash bank with the appropriate fash start address and specify that this is
the flash bank to be used as default configuration instead of the
default by setting FLASH_BANK=4
2020-01-27 22:32:06 +01:00
Frits Kuipers
9206b955eb
boards/pinetime: Add pyocd support to pinetime board
2020-01-27 19:43:48 +01:00
benpicco
f6d750afe9
Merge pull request #13201 from gschorcht/boards/nucleo-f4xx-doc-fix
...
boards: doc fix for several nucleo-f4xxxx boards
2020-01-25 15:19:55 +01:00
Gunar Schorcht
6fc82f2b2a
boards: doc fix for several nucleo-f4xxxx boards
...
Rows in markdown tables must not contain a line break. Otherwise the table is broken.
2020-01-25 13:28:15 +01:00
benpicco
43b736969b
Merge pull request #13138 from francois-berder/pic32-docs
...
boards: Improve documentation for pic32-clicker and pic32-wifire
2020-01-24 17:48:43 +01:00
Francois Berder
f4404f2df6
boards: pic32-wifire: Improve documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-24 09:49:09 +00:00
Francois Berder
f1e1de5710
boards: pic32-clicker: Improve documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-24 09:49:09 +00:00
benpicco
358a2625fc
Merge pull request #13136 from jeandudey/2020_01_15-cc2538dk-resc
...
boards: cc2538dk: remove `machine SetClockSource`.
2020-01-24 10:45:59 +01:00
Marian Buschsieweke
f58b82bd39
Merge pull request #13163 from gschorcht/board/mega-xplained/fix_adc_lines
...
boards/mega-xplained: fix ADC line defintions
2020-01-23 11:34:38 +01:00
Jean Pierre Dudey
f96fc62369
cc1352-launchpad: fix documentation errors.
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:05:52 -05:00
Jean Pierre Dudey
cc170e9987
cc1352-launchpad: remove export from XDEBUGGER
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:04:54 -05:00
Jean Pierre Dudey
a6117ff0a2
cc1352-launchpad: enable periph_gpio_irq.
...
This feature is supported by the processor.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:04:02 -05:00
97cb4c5707
Merge pull request #13134 from jeandudey/2020_01_15-cc1312-launchpad
...
boards: add cc1312-launchpad board.
2020-01-20 07:39:38 +01:00
Jean Pierre Dudey
633aa8cd41
boards: add cc1312-launchpad board.
...
This is mostly based on the cc1352-launchpad boards, is essentially the same
buttons and leds pins, what changes is the CCXML files used to flash with
`make flash` and the UART pins.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-19 11:36:31 -05:00
Gunar Schorcht
f53534ed44
boards/mega-xplained: fix ADC line defintions
...
For the ATmega platform the ADC lines are not defined according to the GPIOs. Instead, they are defined from 0 to ADC_NUMOF-1, which in turn represents the bit in the corresponding ADC registers. The mapping from the line number to the corresponding ADC register/bit combination is done implicitly by the periph/adc implementation.
2020-01-18 13:19:11 +01:00
9ae80f56d1
pinetime: Fix battery ADC line define
2020-01-18 11:15:04 +01:00
c4877c6d41
Merge pull request #13141 from gschorcht/cpu/esp32/fix_c_linkage
...
cpu/esp32: fix C linkage compilation error
2020-01-16 15:06:01 +01:00
Gunar Schorcht
416e8ce8e6
cpu/esp32: fix C linkage compilatio error
...
With the new toolchain version required to fix issue #13133 , the compilation of `examples/posix_socket` fails due to a C linkage error in `atomic_base.h`. The reason is that including `drivers/include/mtd.h` in `boards/esp32/board_common.h` inside the `extern C` block finally leads to including `atomic_base.h` inside the `extern C` block which in turn to the C linkage error for the template definitions in this file.
2020-01-16 13:03:49 +01:00
81dbba2588
boards/pinetime: fix jlink rtt configuration
2020-01-15 22:12:06 +01:00
Martine S. Lenders
78b5c1ee5c
boards: initial import of Adafruit Feather nRF52840 Express
...
This provides support initial support for the [Adafruit Feather nRF52840
Express][feather-nrf52840]. The current feature set includes:
- Default flashing via Segger J-Link
- UART, SPI, and I2C exposed in accordance to the Feather [pinout]
- SAUL support for on-board LEDs and button
[feather-nrf52840]: https://learn.adafruit.com/introducing-the-adafruit-nrf52840-feather/
[pinout]: https://cdn-learn.adafruit.com/assets/assets/000/046/243/original/adafruit_products_Feather_M0_Adalogger_v2.2-1.png
[pid.codes]: http://pid.codes/1209/7D00/
2020-01-15 22:11:58 +01:00
3b4fe41296
Merge pull request #13130 from kaspar030/ili9341_resolution_param
...
drivers/ili9341: add number of lines parameter
2020-01-15 18:33:14 +01:00
Jean Pierre Dudey
94ca53c3b9
boards: cc2538dk: remove machine SetClockSource.
...
It causes errors on current Renode versions. It wasn't documented on the
Renode changelog, but SetClockSource property was removed. Before this
change it showed this error:
There was an error executing command 'machine SetClockSource cpu'
machine does not provide a field, method or property SetClockSource.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-15 11:44:02 -05:00
47634addf3
boards/pinetime: configure ili9341 LCD number of lines
2020-01-15 15:36:21 +01:00
76b9cfb677
Merge pull request #12973 from fjmolinas/pr_atmega_tx_isr
...
cpu/atmega_common/periph/uart: use TX_ISR to check TX end
2020-01-15 11:51:22 +01:00
Hauke Petersen
8b408fc828
Merge pull request #12724 from aabadie/pr/stdio_rtt_blacklist
...
make: improve handling of the stdio_rtt module, improve dependency management at application level
2020-01-15 10:12:13 +01:00
Francisco Molina
fb388bf5b6
boards/atmega/include/periph_conf_atmega_common: add USARTn_TX_vect
2020-01-15 10:02:41 +01:00
fcec59261c
Merge pull request #12552 from kaspar030/add_pinetime_support
...
boards: add initial support for the PINE64 PineTime smartwatch
2020-01-15 09:51:40 +01:00
630ff1425a
Merge pull request #13125 from francois-berder/clicker-pic32prog
...
boards: pic32-clicker: Use pic32prog as default programmer
2020-01-15 07:08:31 +01:00
benpicco
2ff710c762
Merge pull request #12669 from benpicco/mcb2388
...
boards: add mcb2388
2020-01-14 22:46:49 +01:00
Benjamin Valentin
9183d16278
boards: add mcb2388
...
The MCB2388 Evaluation Board is a development board for the LPC2388 MCU.
LPC2388 and LPC2387 are very simmilar, the only difference is added USB Host
support.
Since this is not used yet, I chose to just pretend it's an lpc2387.
So far, only the two UARTs, LEDs and LCD display are configured.
2020-01-14 21:21:08 +01:00
5c21df5fee
boards/pinetime: initial support for the PINE64 PineTime smartwatch
2020-01-14 21:06:43 +01:00
Francois Berder
634fea8347
boards: pic32-clicker: Use pic32prog as default programmer
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-14 19:43:13 +00:00
8d16ccb96a
Merge pull request #13115 from basilfx/feature/slstk3401a_doc_fixes
...
boards/slstk3401a: update documentation
2020-01-14 17:00:03 +01:00
ef947d3495
Merge pull request #13114 from basilfx/feature/slstk3402a_doc_fixes
...
boards/slstk3402a: update documentation
2020-01-14 16:59:52 +01:00
a1850773ff
Merge pull request #13116 from basilfx/feature/stk3600_docs
...
boards/stk3600: add documentation
2020-01-14 16:00:35 +01:00
f3476452cb
Merge pull request #13117 from basilfx/feature/stk3700_docs
...
boards/stk3700: add documentation
2020-01-14 15:28:27 +01:00
628f085f37
Merge pull request #13118 from basilfx/feature/slwstk6000b_docs
...
boards/slwstk6000b: add documentation
2020-01-14 15:02:49 +01:00
5de5616c92
Merge pull request #13113 from basilfx/feature/sltb001a_doc_fixes
...
boards/sltb001a: update documentation
2020-01-14 15:02:34 +01:00
Martine Lenders
7430ea98ed
Merge pull request #13096 from nmeum/pr/fix_asan_target
...
boards/native: fix all-asan Makefile target
2020-01-14 13:43:22 +01:00
Francisco
f76f7c73ce
Merge pull request #12957 from aabadie/pr/cpu/fe310_spi
...
cpu/fe310: add spi peripheral driver
2020-01-14 10:54:47 +01:00
Bas Stottelaar
4f3083793d
Merge pull request #13099 from basilfx/feature/ikea_tradfri_modules
...
boards/ikea-tradfri: add board documentation.
2020-01-14 10:25:53 +01:00
Francisco
a6cf5cf3f9
Merge pull request #12946 from aabadie/pr/cpu/fe310_i2c
...
cpu/fe310: add i2c peripheral driver
2020-01-14 10:20:11 +01:00
57d5a1db1c
boards: provide stdio_rtt as default module where required
...
For the moment, hamilton, ruuvitag and thingy52 use stdio_rtt by default.
2020-01-14 07:48:08 +01:00
Bas Stottelaar
12ec03d2e0
boards/sltb001a: update documentation
2020-01-13 23:38:43 +01:00
Bas Stottelaar
8f22110210
boards/slstk3402a: update documentation
2020-01-13 23:38:10 +01:00
Bas Stottelaar
488c545674
boards/slstk3401a: update documentation
2020-01-13 23:37:40 +01:00
Bas Stottelaar
52ecf0fcc1
boards/stk3600: add documentation
2020-01-13 23:37:02 +01:00
