Kevin "Bear Puncher" Weiss
90b5865692
Merge pull request #10691 from aabadie/pr/boards/stm32_useless_defines
...
boards/stm32: remove useless empty conf defines
2019-01-02 17:00:30 +01:00
c0b1d37d73
boards/nucleo-f072rb: use common i2c configuration
2019-01-02 16:08:56 +01:00
402f02d471
boards/nucleo-f767zi: use STM32 common i2c config
2019-01-02 16:06:34 +01:00
9a69c9bbc5
boards/stm32: remove useless empty conf defines
2019-01-02 14:52:38 +01:00
3eba44a660
boards/nucleo-f0207zg: use common clock and i2c configuration
2019-01-02 14:29:26 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
Kevin "Bear Puncher" Weiss
02ec3845de
Merge pull request #9728 from aabadie/pr/boards/stm32_common_i2c
...
boards: factorize some nucleo f4/f7/l4 i2c configuration
2019-01-02 14:05:32 +01:00
536e4a55a8
boards/nucleo-l496zg: provide and configure i2c
2019-01-02 11:27:42 +01:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
4fd4ce4c54
boards/nucleo-f722/l476: use common i2c configuration
2019-01-02 11:26:54 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
b81941f953
boards/nucleo-f4**: use common clock and I2c configuration
2019-01-02 10:30:13 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
Martine Lenders
b0f64dbb98
Merge pull request #9847 from aabadie/pr/tools/pyocd
...
dist/tools: add support for PyOCD programmer/debugger
2018-12-28 12:09:51 +01:00
f682476c87
boards/nucleo-l496zg: adapt conf to lpuart driver
...
Co-authored-by: Vincent Dupont <vincent@otakeys.com>
2018-12-27 14:16:05 +01:00
d2a07f0494
boards/nrf51dk: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
77c9f783bd
boards/microbit: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
Dylan Laduranty
63e71cbbde
Merge pull request #10314 from fedepell/saml21-xpro_arduino
...
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 14:03:19 +01:00
Federico Pellegrin
dc8c84f7eb
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 12:41:40 +01:00
Gunar Schorcht
c352966d29
boards/esp32: UART configuration fix
...
Fixes the UART pin configuration for UART_DEV(0). Since this configuration is fixed and only defined for documentation purposes, the change has no impact on the code.
2018-12-20 07:57:20 +01:00
4ae15d18b5
boards/stm32based: remove periph_gpio/irq from board level
2018-12-18 21:51:14 +01:00
839daf871a
boards/nrf52: remove periph_gpio feature
...
It is now provided at cpu level in cpu/nrf5x_common
2018-12-18 21:33:27 +01:00
Francisco Acosta
3cf33f7b5c
boards: add riotboot feature to tested boards
...
Currently only tested boards provide the feature riotboot.
Potentially all boards embeding a cortex-m0+/3/4/7 are
able to have riotboot as a feature, but other dependencies
need to be met, e.g. usage of cortexm.ld linker script,
double initialisation of cpu_init(), etc. See doc in
bootloaders/riotboot.
2018-12-18 19:31:35 +01:00
Peter Kietzmann
f1e80c4dd3
Merge pull request #10434 from aabadie/pr/sam0_gpio_features
...
cpu/sam0_common: provide periph_gpio/gpio_irq features at cpu level
2018-12-18 17:54:11 +01:00
Gaëtan Harter
321dc5292f
Merge pull request #10548 from jcarrano/flash-canned-recipe
...
Makefile.include: flash: do not peek into MAKECMDGOALS.
2018-12-18 14:09:55 +01:00
d95e19af15
boards*: remove periph_gpio/gpio_irq provided feature
...
It is now provided at cpu level
2018-12-17 20:54:09 +01:00
Martine Lenders
78308b93df
Merge pull request #10279 from aabadie/pr/boards/nrf52_common
...
boards/common/nrf52: introduce new and more generic common place
2018-12-17 12:29:57 +01:00
Martine Lenders
a3864aa103
Merge pull request #9158 from aabadie/pr/periph/stm32_lpuart
...
cpu/stm32-common: add support for lpuart
2018-12-17 12:16:27 +01:00
MrKevinWeiss
d7eb070eb4
cpu/stm32f1: Add remap support for stm32f1 cpus and boards
...
This commit fixes configuration problems when trying to use i2c pins that need to be remapped.
All B8 and B9 pins for STM32F1 need to be remapped, so a check is done if the remappable pins are selected.
2018-12-14 09:16:37 +01:00
58b85b256b
boards: update UART conf for STM32 based boards
2018-12-13 12:39:00 +01:00
537e93a527
board/nucleo-l073: use LPUART for third UART
2018-12-13 12:39:00 +01:00
8c6a7bc370
boards/nucleo-l433rc: use lpuart for stdio
...
- this UART is connected to st-link and can be reached via USB
- the second UART is linked to Arduino RX/TX pins
2018-12-13 12:39:00 +01:00
Kevin "Bear Puncher" Weiss
e0997b4fc7
Merge pull request #10600 from jia200x/pr/phyNODE_kw41Z
...
boards/phynode-kw41z: add initial support
2018-12-13 11:44:34 +01:00
5b17d52542
Merge pull request #10466 from maribu/stm32f103c_i2c
...
boards/common/stm32f103c8: Fixed I2C configuration
2018-12-13 11:25:22 +01:00
Jose Alamos
40d791e898
doc: add documentation for phynode-kw41z board
2018-12-13 10:35:50 +01:00
Jose Alamos
50c7b5c11a
boards/phynode-kw41z: add initial support
2018-12-13 10:35:50 +01:00
aa7a8058d8
boards/ruuvitag: also use nrf52 common place
2018-12-13 10:15:42 +01:00
50fb400413
boards/thingy52: also use nrf52 common place
2018-12-13 10:15:42 +01:00
5fd907eb08
boards/nrf52840dk: remove useless provided feature
2018-12-13 10:15:42 +01:00
cd2f18311f
boards/nrf52dk: remove useless provided feature
2018-12-13 10:15:42 +01:00
b2f4a7e735
boards/acd52832: also use nrf52 common place
2018-12-13 10:15:42 +01:00
5429c71cd3
boards/nrf52xxdk: use available nrf52 common place
2018-12-13 10:15:42 +01:00
cd206a909c
boards/common/nrf52: add common nrf52 place
2018-12-13 10:15:42 +01:00
Leandro Lanzieri
4ce63d00ea
Merge pull request #10280 from fedepell/stk3700_arduino
...
boards/common/silabs: add Arduino API support for SiLabs boards
2018-12-12 09:51:13 +01:00
104bb525c9
boards/microbit: fix typo in flash script
2018-12-11 11:10:53 +01:00
Juan Carrano
c6b8cbea00
kinetis-based-boards: use FLASHDEPS instead of flash: xxxx.
...
With the canned recipe for flashing, flash dependencies should be
added to FLASHDEPS, instead of writing `flash: dependencies`. This
ensures that both flash and flash-only depend on the same prerequisites.
2018-12-06 15:36:53 +01:00
MrKevinWeiss
97e84f816c
boards/frdm-k22f: Add second UART to config
...
This PR adds a second uart on two non-conflicting pins.
Since the first UART is used for shell this allows a usable UART.
2018-12-06 14:45:45 +01:00
Joakim Nohlgård
a42df69ea8
frdm-k64f: Add LPTMR configuration
2018-12-06 14:18:05 +01:00
Leandro Lanzieri
b6abbad6fb
Merge pull request #10553 from aabadie/pr/boards/feature_periph_irq_missing
...
boards/{firefly,samr30-xpro}: add missing `periph_gpio_irq` provided feature
2018-12-06 13:11:36 +01:00
e9c9fd5133
boards/samr30-xpro: add missing periph_gpio_irq feature
2018-12-05 17:56:57 +01:00
b600a908ec
boards/firefly: add missing periph_gpio_irq feature
2018-12-05 17:56:48 +01:00
Gaëtan Harter
0b664453dc
hifive1/flasher.sh: get flash file from cli
...
Get FLASH_FILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
This is the same change as with `openocd.sh`.
2018-12-05 16:21:03 +01:00
Gaëtan Harter
a0b97ad737
openocd: get flash and debug files from cli
...
Get FLASH_FILE and ELFFILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
2018-12-05 16:21:03 +01:00
94b7b242b2
boards/nrf51dk: add initial support
2018-12-04 08:37:00 +01:00
8bd839f04d
Merge pull request #10473 from cladmi/pr/make/flash_sh/get_flashfile_from_cli
...
board/*/flash.sh: get file to flash from command line
2018-12-03 14:20:35 +01:00
Peter Kietzmann
c83493728a
Merge pull request #10435 from leandrolanzieri/pr/boards/sodaq_sara_r410m
...
boards/sodaq-sara-aff: Initial support
2018-12-03 14:11:34 +01:00
Leandro Lanzieri
d53fbb0045
boards/sodaq-sara-aff: Initial support
2018-12-03 10:05:37 +01:00
ed75f0a2c5
usb-kw41z: improve doc and sort module dependencies
2018-12-02 17:38:35 +01:00
Joakim Nohlgård
36e5b8ef23
usb-kw41z: NXP USB-KW41Z wireless IoT USB dongle
2018-12-01 13:51:55 +01:00
Kevin "Bear Puncher" Weiss
153759b926
Merge pull request #10498 from smlng/pr/adapt/7542
...
atmega: add periph_pwm (taken from #7542 )
2018-11-29 15:54:51 +01:00
a7fa9e5580
Merge pull request #10478 from gebart/frdm/openocd-default-new
...
frdm: Use configuration for OpenOCD 0.10.0 or newer by default
2018-11-29 15:05:50 +01:00
Kevin "Bear Puncher" Weiss
46bdbb6535
Merge pull request #10484 from smlng/pr/atmega/timer
...
atmega: fix periph timer configuration
2018-11-29 14:28:23 +01:00
Joakim Nohlgård
26d782533c
frdm: Use configuration for OpenOCD 0.10.0 or newer by default
...
Update your environment variables if you are running an older Debian or
Ubuntu release and use the distribution provided OpenOCD packages.
2018-11-29 14:23:49 +01:00
smlng
262a04c9cf
atmega: fix periph timer configuration
...
- correct number of timers for atmega328p from 2 to 1
- correct number of timer channels for atmega328p from 3 to 2
- adapt atmega periph timer implementation accordingly
2018-11-29 09:30:44 +01:00
Victor Arino
8ff8aefb72
boards/arduino-atmega-common: support for PWM
2018-11-29 08:50:56 +01:00
Martine Lenders
4b06d64778
Merge pull request #10454 from jcarrano/msba2-fix-port
...
boards/msba2: Do not set PORT.
2018-11-28 16:43:23 +01:00
Juan Carrano
c4ccaecda5
boards/msba2: Do not set PORT.
...
Boards should not set PORT and should not have code conditional on
PORT as that causes PORT to be evaluated and the build to fail even
if this varible is not needed.
Exporting has the same effect.
This fixes the MSBA2 board by declaring PORT_LINUX and PORT_DARWIN
instead.
2018-11-28 15:46:53 +01:00
7078acfadf
Merge pull request #10423 from gebart/frdm-k64f/btn-macros
...
frdm-k64f: Define BTNx macros for user pushbuttons
2018-11-28 11:39:36 +01:00
Joakim Nohlgård
2b0892996e
frdm-k64f: Define BTNx macros for user pushbuttons
2018-11-28 10:43:36 +01:00
Hauke Petersen
d8cfe1f470
Merge pull request #10476 from aabadie/pr/boards/nrf51_no_adc
...
boards/nrf51: remove ADC_NUMOF define when not needed
2018-11-28 09:48:37 +01:00
Juan I Carrano
bac432781c
Merge pull request #10471 from cladmi/pr/flash_sh/use_binfile
...
boards/flash.sh: rename HEXFILE to BINFILE
2018-11-27 17:56:27 +01:00
Juan I Carrano
0294a38429
Merge pull request #10472 from cladmi/pr/board/remote/common/fix_jlink_flasher
...
boards/common/remote: fix mis-migrated path for flash/reset
2018-11-27 15:19:09 +01:00
91e3215ce2
boards/nrf51: remove ADC_NUMOF define when not needed
2018-11-27 08:41:00 +01:00
Gaëtan Harter
1c12cb31e9
opencm904/flash: get arguments from cli
2018-11-26 17:28:36 +01:00
Gaëtan Harter
4ef7511b7e
microbit/flash: get BINFILE from cli
2018-11-26 17:14:55 +01:00
Gaëtan Harter
8b2ff285be
mbed_lpc1768/flash: get BINFILE from cli
2018-11-26 17:14:55 +01:00
Gaëtan Harter
44da86f2ee
calliope-mini/flash: get HEXFILE from cli
2018-11-26 17:14:55 +01:00
Gaëtan Harter
214f971174
boards/common/remote: fix mis-migrated path for flash/reset
...
The path to flash/reset/debug was not migrated correctly when moving to
`remote-common` (even before `common/remote`).
2018-11-26 17:01:02 +01:00
cladmi
52b0b183a3
boards/flash.sh: rename HEXFILE to BINFILE
...
Flasher are doing 'loadbin' so use BINFILE name.
2018-11-26 16:39:11 +01:00
Marian Buschsieweke
2b7a63b9b5
boards/common/stm32f103c8: Fixed I2C configuration
...
In commit e90f2b439e
2018-11-26 13:12:36 +01:00
430c50bcec
boards/yunjia-nrf51822: use common clock config
2018-11-26 11:25:04 +01:00
4805fcc0a8
boards/microbit: use common clock config
2018-11-26 11:23:22 +01:00
a248a0aa51
boards/calliope-mini: use common clock config
2018-11-26 11:23:22 +01:00
ee2a5a3448
boards/nf6310: use common clock config
2018-11-26 11:23:22 +01:00
4c0dc13040
boards/nf51dongle: use common clock config
2018-11-26 11:23:22 +01:00
bcb23fbed8
boards/airfy-beacon: use common clock config
2018-11-26 11:23:22 +01:00
b1de432cd2
boards/common/nrf51: add common clock configuration
2018-11-26 11:23:22 +01:00
Hauke Petersen
ac50b4a052
Merge pull request #10243 from aabadie/pr/board/common_nrf51
...
boards/common: add common place for nrf51 based boards
2018-11-26 10:07:31 +01:00
Kevin "Bear Puncher" Weiss
c699eef9cb
Merge pull request #10424 from gebart/frdm-k22f/btn-macros
...
frdm-k22f: Define BTNx macros for user pushbuttons
2018-11-23 13:49:57 +01:00
059af13933
Merge pull request #10306 from aabadie/pr/drivers/mma8x5x_update
...
drivers/mma8x5x: remove useless type from initialization parameters
2018-11-22 10:18:43 +01:00
MichelRottleuthner
1be4d15a4e
Merge pull request #10390 from PeterKietzmann/pr_mega2560_puf_seed
...
cpu/atmega_common: add mega2560 puf_sram feature
2018-11-22 09:57:19 +01:00
Leandro Lanzieri
b2b7a54470
Merge pull request #10449 from smlng/pr/lorabox/gpio_irq
...
boards: add feature periph_gpio_irq to lobaro-lorabox
2018-11-22 08:07:07 +01:00
Sebastian Meiling
5b118df6b1
boards: add feature periph_gpio_irq to lobaro-lorabox
2018-11-21 17:35:49 +01:00
Juan I Carrano
68d68d18b4
Merge pull request #10362 from gschorcht/esp32_compile_fix
...
cpu/esp32: fixes compile problems
2018-11-21 14:18:15 +01:00
5436f84449
boards/microbit: auto include mma8653 driver with saul
2018-11-20 10:42:14 +01:00
b089b9076f
boards/microbit: remove useless MMA8X5X_TYPE param
2018-11-20 10:42:14 +01:00
