19938: boards/stm32l496g-disco: enable ST7789 display and touch panel r=benpicco a=gschorcht
### Contribution description
This PR enables the ST7789 display and the touch panel for the `stm32l496g-disco`.
The PR requires PR #19937.
### Testing procedure
```
BOARD=stm32l496g-disco make -j8 -C tests/drivers/st77xx
```
should work.
### Issues/PRs references
Depends on PR #19937
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19937: drivers/lcd: add MCU 8080 16-bit parallel mode support r=benpicco a=gschorcht
### Contribution description
This PR adds the 16-bit support for MCU 8080 parallel mode for LCD driver ICs.
### Testing procedure
Use either PR #19938
```
BOARD=stm32l496g-disco make -j8 -C tests/drivers/st77xx
```
or #19939 on top of this PR to test.
```
BOARD=sstm32f723e-disco make -j8 -C tests/drivers/st77xx
```
### Issues/PRs references
Prerequisite for PR #19938 or PR #19938
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19927: sys/shell/ping: fix ping packet size overflow r=miri64 a=krzysztof-cabaj
### Contribution description
In #19829 `@mchesser` point out integer overflow in the ```ping``` command and API. This PR fix this issue in two ways:
1) Add protection in the API.
2) Add protection in the user command.
### Testing procedure
Without this PR passing negative number to the ```ping -s``` option cause segmentation fault, for example in the
```example/gnrc_networking```:
```
> ping -s -7 ::1
ping -s -7 ::1
Segmentation fault
```
With this PR user shows appropriate warning test:
```
> ping -s -7 ::1
ping -s -7 ::1
ICMPv6 datagram size should be in range <0, 65527>.
>
```
### Issues/PRs references
Issue #19829
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
19914: boards: complete SD Card MTD definition for several bords r=benpicco a=gschorcht
### Contribution description
This PR completes the MTD definition for the following boards:
- `seeedstudio-gd32`
- `sipeed-longan-nano` including `sipeed-longan-nano-tft`
- `waveshare-nrf52840-eval-kit`
- ESP32x boards that have an SPI SD Card interface and use `mtd_sdcard_default`
### Testing procedure
Green CI
### Issues/PRs references#19465
Prerequisite for PR #19465
19915: drivers/lcd: support MCU 8080 8-bit parallel mode r=benpicco a=gschorcht
### Contribution description
LCD driver ICs usually support
- SPI serial mode,
- MCU 8080 8-bit parallel mode and
- MCU 8080 16-bit parallel mode.
This PR extends the LCD display driver API to support the MCU 8080 8-/16-bit parallel modes and implements a GPIO-driven MCU 8080 8-bit parallel mode.
The following features are already working locally and will be provided as follow-on PRs for which this PR is a prerequisite.
- GPIO-driven bit-banging implementation of the 16-bit mode of the MCU 8080 parallel interface
- Enabling the display on `stm32f723e-disco` and `stm32l496g-disco` using the feature above
- Definition of a low-level API for the parallel modes using the LCD controller of the MCU
- Using FMC for the display on `stm32f723e-disco` and `stm32l496g-disco`
- Using LCD controller for the display of `esp32-wt32-sc01-plus` (PR #19917)
### Testing procedure
The PR can be tested with PR #19917 on top of this PR.
```
BOARD=esp32s3-wt32-sc01-plus make -j8 -C tests/drivers/st77xx flash
```
The following video shows the test.
**Please note** The test is pretty slow because the display has 480 x 320 pixels and the MCU 8080 8-bit parallel interface is realized by a GPIO-driven bit-banging implementation where each GPIO of the data bus is set separately. A follow-up PR will use the ESP32-S3 LCD controller and DMA for this board. This PR just defines the extension of the driver by the parallel interface and provides the bit-banging implementation for MCUs that don't have a LCD controller on chip.
https://github.com/RIOT-OS/RIOT/assets/31932013/c1e3e3d7-05d9-4ca5-8fff-9a5eaca50fba
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19919: drivers/st77xx: introduce rotation defines r=benpicco a=gschorcht
### Contribution description
The PR introduces counterclockwise rotations for the definition of parameter `ST77XX_PARAM_ROTATION`.
It is more intuitive and universal to use `ST77XX_ROTATION_{0,90,180,270}` instead of `ST77XX_ROTATION_{ST77XX_ROTATION_{VERT,VERT_FLIP,HORZ,HORZ_FLIP}`, especially because the orientation of the display may vary with respect to the orientation of the board.
### Testing procedure
`tests/drivers/st77xx` should still work, for example:
```
BOARD=adafruit-pybadge make -C tests/drivers/st77xx flash
```
```
BOARD=esp32s3-usb-otg make -j8 -C tests/drivers/st77xx flash
```
### Issues/PRs references
19931: boards: fix documentation for GD32V boards and doxygen 1.9.4 r=benpicco a=gschorcht
### Contribution description
This PR fixes some small problems in documentation of `sipeed-longan-nano`, `sipeed-longan-nano-tft` and `seeedstudio-gd32` for doxygen 1.9.4 that is used on `doc.riot-os.org`.
Doxygen version 1.9.4 doesn't like anymore
- single double quotes as symbol for the inches unit in the text
- line breaks in `[]()` to avoid exhausting the 100 characters per line.
See https://doc.riot-os.org/group__boards__sipeed__longan__nano.html for example.
Doxygen 1.9.1 which is part of `riot-docker` container didn't have theses problems 😟
### Testing procedure
Documentation should be fixed.
### Issues/PRs references
19935: boards/nucleo64: fix SPI Arduino mapping for most boards r=benpicco a=maribu
### Contribution description
Before, the Arduino SPI mapping for all Nucleo-64 boards was incorrect. With this, the situation improves to the following:
- [x] nucleo-f030r8
- [ ] nucleo-f070rb
- No SPI buses provided.
- [x] nucleo-f072rb
- [x] nucleo-f091rc
- [x] nucleo-f103rb
- [ ] nucleo-f302r8
- No SPI bus at D11, D12, D13 provided
- [x] nucleo-f303re
- [x] nucleo-f334r8
- [x] nucleo-f401re
- [x] nucleo-f410rb
- [x] nucleo-f411re
- [x] nucleo-f446re
- [x] nucleo-g070rb
- [x] nucleo-g071rb
- [x] nucleo-g431rb
- [x] nucleo-g474re
- [x] nucleo-l053r8
- [x] nucleo-l073rz
- [x] nucleo-l152re
- No SPI bus at D11, D12, D13 provided
- [x] nucleo-l452re
- [x] nucleo-l476rg
- [x] nucleo-wl55jc
The remaining offenders still need to be fixed, but that is better done one PR at a time.
### Testing procedure
- Check if the SPI device provided in the given `boards/<BOARD_NAME>/incude/periph_conf.h` is indeed `SPI_DEV(0)`, or in `periph_conf.h` the correct SPI dev is found
- this should be fine for all boards above, except for the unchecked ones
or:
- run https://github.com/RIOT-OS/RIOT/pull/19932: The SPI test should pass now
### Issues/PRs references
Bug found in https://github.com/RIOT-OS/RIOT/pull/19932#issuecomment-1726305437
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
