This is an implementation of the ESP32 SoftAP mode using the
`esp_wifi_ap` pseudomodule.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Add `TARGET_ARCH_<ARCH>` for each architecture (e.g. `TARGET_ARCH_CORTEX` for
Cortex M) to allow users to overwrite the target triple for a specific arch
from ~/.profile or ~/.bashrc (or the like) without overwriting it for all others
as well.
To be able to define common configurations for all ESP CPUs, the CPU specific configuration cpu_conf.h has to include a common configuration. For that purpose cpu_conf.h in cpu/esp_common is renamed to cpu_conf_common.h and included in CPU specific configurations.
The same tool 'gen_esp32part.py' is used for the generation of partition tables on ESP8266 as well as n ESP32. The tool is therefore added to 'dist/tools/esptool'
To control the log level and the format of the log output of SDK libraries, a bunch of library-specific printf functions are realized which map the log output from SDK libraries to RIOT's log macros.
Some ESP8266/ESP8285 modules only work with DOUT SPI flash mode and a SPI flash frequency of 26 MHz. Therefore, these parameters have to be used by default. Otherwise some modules will no boot.
Startup information, including board configuration, is only printed when module esp_log_startup is used. This reduces the amount of information that is printed by default to the console during the startup. The user can enable module esp_log_startup to get the additional startup information.
To avoid that murdock times out before tests/pkg_spiffs and tests/pkg_littlefs time out, the configured test timeouts for these tests is reduced to 200 seconds which should be enough. An ESP32 needs an average of 60 seconds for these tests, while an ESP8266 needs in average 100 seconds.
The modified version esptool.py from RTOS SDK that is required for flashing an image, is now placed in `dist/tools/esptool.py` and used directly from there. The advantage is that `esptool.py` hasn't to be installed explicitly anymore. Having RIOT is enough. The documentation is adapted accordingly. The oly prerequisite is that python and the pyserial module are installed.
In vendor startup code, initialization function were called as parameters of assert statement. With DEVELHELP, they are not called since the assert macro does nothing.
To make the migration progress to the new RTOS SDK easier, the new toolchain was renamed to xtensa-esp8266-elf. This makes it possible to have the new and the old toolchain installed in parallel.
If the WiFi module is used, a number of high priority tasks is created. To void priority collisions with netdev drivers, the number of priorities SCHED_PRIO_LEVELS has to be increased to 32. But in other cases, the default number should be used, also to keep automatic tests working.
This reverts commit 422644bd3a.
The option is only supported after 2.6 which is currently not the
version given with 'esp' toolchain.
It was a bit too early to switch to the new version.
Version 2.7 also supports the old option with only a warning.
Using flash size in megabits is deprecated by esptool.
Use the new megabyte notation.
WARNING: Flash size arguments in megabits like '8m' are deprecated.
Please use the equivalent size '1MB'.
Megabit arguments may be removed in a future release.
esptool.py v2.6
UART FIFO must contain only 1 byte when newlib's `printf` function is used. Otherwise, outputs that are still not sent over UART are lost when `printf` is called asynchronousely.
To avoid unresolved symbols for unused functions during linking, compiler option `-ffunction-sections` is used now. Linker option `--warn-unresolved-symbols` is removed to get errors if required symbols cannot be resolved.
The modules `newlib, `newlib_syscalls_default` and `stdio_uart` are now used by default for output to the UART interface. This also reduces the dependency rules.
The overridden stdio functions `puts`, `putchar` and `printf` were removed. Instead, the corresponding newlib functions are always used. Using the newlib functions fixes output conflicts when using `f *` functions like `fprintf`,` fputs`, ... with `stdout` as the file parameter.
Use the -gz option to compress ELF sections containing DWARF information.
This saves around 50% of disk space, without any side effects.
See https://gcc.gnu.org/onlinedocs/gcc-9.2.0/gcc/Debugging-Options.html#Debugging-Options
for more infomation on this option.
Some platforms have an outdated toolchain that does not support -gz so
the flag is blacklisted there. Even then, the results are quite impressive.
I used @cladmi's `buildtest` branch (https://github.com/cladmi/RIOT/tree/wip/du/buildtest)
with this change and compiled the `examples/default` application:
```
$ BUILD_IN_DOCKER=1 DOCKER="sudo docker" make -C examples/default buildtest-indocker
```
The size was obtained with:
```
$ find output -name "*.bin.bindirsize" -type f -exec tail -n1 '{}' \; | cut -f 1 | awk '{s+=$1} END {printf "%.0f", s}'
```
Results:
- Vanilla: 10328112 KB (~10GB).
- with -gz: 4982788 KB (~5GB).
This was inspired by #8496.
