benpicco
8ed8775c8e
Merge pull request #14269 from benpicco/cpu/sam0_common/timer_drop_prescaler
...
cpu/sam0_common: drop prescaler from timer config
2020-06-12 14:16:59 +02:00
Francisco
01d0e30229
Merge pull request #14244 from fjmolinas/pr_samr21_usec_min
...
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-12 09:24:52 +02:00
Benjamin Valentin
54b57bd97f
cpu/sam0_common: drop prescaler from timer config
...
since c05984b341
2020-06-11 19:29:43 +02:00
Benjamin Valentin
871107e67f
boards/weact-f411ce: enable automatic reset to bootloader
2020-06-11 16:37:30 +02:00
Francisco Molina
d32467bf03
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-11 15:59:24 +02:00
Benjamin Valentin
2325dba871
makefiles/bossa: move USB reset logic to common file
2020-06-11 11:56:35 +02:00
Francisco
52bcdff113
Merge pull request #14245 from fjmolinas/pr_iotlab_baud
...
boards/common/iotlab: don't enforce BAUD
2020-06-11 09:13:03 +02:00
Marian Buschsieweke
1cf1f75db1
Merge pull request #14240 from benpicco/boards/WeAct-f411_dynamic_flash
...
boards/weact-f411ce: determine flash size at run-time
2020-06-10 22:22:59 +02:00
benpicco
75d82cc9b8
Merge pull request #14209 from btcven/2020_06_04-common-cfg
...
boards/cc26x2_cc13x2-based: move config to common directory
2020-06-10 15:32:11 +02:00
Francisco Molina
f556eb6958
boards/common/iotlab: don't enforce BAUD
2020-06-10 13:32:05 +02:00
Benjamin Valentin
59a41968b5
boards/weact-f411ce: determine flash size at run-time
...
The pad for SPI-Flash on the WeAct-f411ce does not come pre-populated.
The user has to manually solder a SPI-flash chip on the board, so specifying
a size here makes no sense.
Instead, rely on automatic detection of the flash size at run-time.
2020-06-10 12:10:29 +02:00
Leandro Lanzieri
58cd126517
Merge pull request #14210 from btcven/2020_06_04-cc26xx_cc13xx_kconfig
...
boards/cc26xx_cc13xx-based: model features in Kconfig
2020-06-10 11:27:31 +02:00
Jean Pierre Dudey
3f2be3784b
boards/cc2650stk: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
b87efa3c4b
boards/cc2650-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
eb599fd5dc
boards/cc1352p-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
6db36b75b4
boards/cc1352-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
ef1fdb5ab4
boards/cc1312-launcpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Kees Bakker
723fe93850
boards/common/sodaq: add XTIMER_DEV and make it equal to other SAMD21
...
For some reason this was looked over a while back.
This resolves issue #14217
2020-06-07 22:25:30 +02:00
benpicco
cb11b2d33f
Merge pull request #14198 from maribu/wemos-zero
...
boards: Add support for the wemos-zero board
2020-06-05 17:55:43 +02:00
Jean Pierre Dudey
283aacbecd
boards/cc26x2_cc13x2-based: move config to common
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-04 17:12:52 -05:00
Marian Buschsieweke
b44ac93558
boards/serpente: Deduplicate serial/programmer handling
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
17b890c16e
boards/{arduino,wemos}-zero: Dedpulicated code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
8b9a98233e
boards: Add support for the WeMos-Zero
...
This is an Arduino Zero clone without the embedded debugger. Thus, it will be
flashed by default using the U2F bootloader and uses by default USB CDC ACM for
STDIO.
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
de189a33f4
boards/arduino-zero: Factor out common code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
fc91e8019e
Merge pull request #12778 from benpicco/boards_WeAct-f411ce
...
boards: add WeAct-f411ce
2020-06-04 13:06:25 +02:00
Benjamin Valentin
b20ec93991
boards: add WeAct-f411ce board
...
The WeAct-F411CE is a blackpill-like board with a STM32F411CE.
It can be flashed using the vendor-provided bootloader.
2020-06-04 12:39:14 +02:00
Kevin "Tristate Tom" Weiss
972d9441ce
Merge pull request #13404 from leandrolanzieri/pr/boards/samr21-xpro/features_kconfig
...
boards/samr21-xpro: Model features in Kconfig
2020-06-03 09:39:41 +02:00
954ac22c45
Merge pull request #13865 from benpicco/usb_custom_id
...
USB VID/PID: allow for boards to define default custom VID/PID
2020-06-02 18:42:37 +02:00
Leandro Lanzieri
4c74881904
boards/samr21-xpro: Add board specific Kconfig symbols
2020-06-02 17:42:16 +02:00
Benjamin Valentin
cb21aea5f6
boards/serpente: properly configure USB ID
2020-06-02 14:17:55 +02:00
02ce7c0332
Merge pull request #14161 from bergzand/pr/nrf52840dk/move_spi_flash_periph
...
nrf52840dk: move SPI flash to SPIM2 peripheral
2020-06-02 13:14:35 +02:00
Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
Marian Buschsieweke
dfa6863275
cpu/atmega{1281,2560}: Relocate default timer config
2020-05-28 16:27:08 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
200afc46fa
cpu/atmega328p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
a950d6bbb6
cpu/atmega{128rfa1,256rfr2}: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
9138e48746
cpu/atmega32u4: Relocate default timer config
2020-05-28 16:27:06 +02:00
d9436171e9
nrf52840dk: move SPI flash to SPIM2 peripheral
...
The SPIM1 peripheral overlaps with TWIM1. TWIM1 is already configured as
the default peripheral for the I2C interface. This commit moves the
peripheral used for the SPI flash to SPIM2. This peripheral is dedicated
for SPI operations and doesn't conflict with other peripherals
2020-05-28 11:55:08 +02:00
benpicco
a5836a6b27
Merge pull request #14128 from btcven/2020_05_24-cc13x2-i2c
...
cc26xx_cc13xx: add periph_i2c implementation
2020-05-25 22:35:55 +02:00
97f98dcace
boards/stm32: remove useless ifdef around DMA config
2020-05-25 13:23:20 +02:00
dc6bb50021
Merge pull request #14093 from bergzand/pr/boards_stm32f4/add_spi_dma
...
boards/stm32f4: Add DMA config for SPI
2020-05-25 13:17:22 +02:00
709f576d4a
ublox-c030-u201: Add DMA config for SPI
2020-05-25 11:42:12 +02:00
859f0d9c03
stm32f4discovery: Add DMA config for SPI
2020-05-25 11:42:12 +02:00
86ae376a8a
stm32f429i-disc1: Add DMA config for SPI
2020-05-25 11:42:12 +02:00
d0f26ac877
pyboard: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
08123b9736
nucleo-f446ze: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
5cee9c61e1
nucleo-f446re: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
5c63c7ccb6
nucleo-f429zi: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
2028a97db6
nucleo-f413zh: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
61830480e9
nucleo-f412zg: add DMA config for SPI
2020-05-25 11:42:11 +02:00
