Benjamin Valentin
a82bc64a34
sys/net/gnrc/netif: only register netif after init was successful
...
If we call `netif_register()` before we can be sure that the interface
can be configured, a 'zombie' interface remains in the list, causing
all kinds of trouble down the line.
Only call `netif_register()` if `init()` was successful.
2021-02-25 21:48:47 +01:00
Marian Buschsieweke
7cfedbfb8a
sys/net/gnrc: fix logic bug in gnrc_tx_sync implementation
...
In case of an error, the tx sync packet snip could previously have been
released twice. This moves re-attaching the tx sync snip down after the
last `goto error` to avoid this.
2021-02-24 21:22:25 +01:00
benpicco
930e760143
Merge pull request #16081 from cgundogan/pr/rpl_options_fix
...
gnrc_rpl: harden validation routine for options
2021-02-24 12:38:45 +01:00
benpicco
9fc60da4ca
Merge pull request #15830 from benpicco/net/nanocoap_add_uri
...
nanocoap: add coap_opt_put_uri_pathquery()
2021-02-24 12:09:08 +01:00
Leandro Lanzieri
b8774009d0
Merge pull request #16009 from MrKevinWeiss/pr/sys/kconfig/simple
...
sys/*/Kconfig: Add simple sys modules to Kconfig
2021-02-24 10:27:01 +01:00
Cenk Gündoğan
72337ebb9b
gnrc_rpl: harden validation routine for options
2021-02-23 18:58:03 +01:00
Benjamin Valentin
769978904a
suit/transport/coap: use coap_opt_put_uri()
...
The URI is passed as a string to `suit_coap_get_blockwise()`.
It may contain query parameters, those will not be translated
properly to CoAP options if `coap_opt_put_uri_path()` is used.
Instead use `coap_opt_put_uri()` to handle both path and query
parameters.
2021-02-23 18:27:54 +01:00
Benjamin Valentin
d4e5c25b70
nanocoap: add coap_opt_put_uri_pathquery()
2021-02-23 18:27:54 +01:00
Martine Lenders
afb027852d
Merge pull request #15992 from yarrick/more_lwip
...
Add lwIP ifconfig shell command
2021-02-23 16:59:41 +01:00
Erik Ekman
eab317749f
sys/shell: Add lwIP ifconfig shell command
...
Lists state, link type, v4/v6 addresses.
Currently read-only.
Using lwIP debug system to print addresses, to limit dependencies
and work with dual stack setup. Most other code seems to only
allow either v4 or v6 networking. For that to compile I
had to change the `SZT_F` format string due to this error:
```
error: format '%lu' expects argument of type 'long unsigned int',
but argument 2 has type 'size_t {aka unsigned int}'
```
Switching to the lwIP default format string here.
Outputs the following on my ESP32 board with Ethernet,
when both v4 and v6 are enabled in examples/paho-mqtt:
```
> ifconfig
Iface ET0 HWaddr: 24:0a:c4:e6:0e:9f Link: up State: up
Link type: wired
inet addr: 10.4.4.81 mask: 255.255.254.0 gw: 10.4.4.1
inet6 addr: fe80:0:0:0:260a:c4ff:fee6:e9f scope: link
inet6 addr: 2001:db8:1000:0:260a:c4ff:fee6:e9f scope: global
Iface ET1 HWaddr: 24:0a:c4:e6:0e:9c Link: up State: up
Link type: wireless
inet addr: 10.4.4.82 mask: 255.255.254.0 gw: 10.4.4.1
inet6 addr: fe80:0:0:0:260a:c4ff:fee6:e9c scope: link
inet6 addr: 2001:db8:1000:0:260a:c4ff:fee6:e9c scope: global
>
```
2021-02-23 11:47:45 +01:00
MrKevinWeiss
94504fb9d1
sys: Expose Kconfig modules
2021-02-22 14:58:09 +01:00
Antonio Galea
9c9056844e
USB CDC: fix typo in definitions
2021-02-22 14:56:37 +01:00
MrKevinWeiss
7512e1002a
sys/uri_parser: Add Kconfig support
2021-02-22 14:54:53 +01:00
MrKevinWeiss
b7d4d83d5c
sys/timex: Add Kconfig support
2021-02-22 14:54:15 +01:00
MrKevinWeiss
476c0d8702
sys/seq: Add Kconfig support
2021-02-22 14:54:15 +01:00
MrKevinWeiss
02d19b0b4a
sys/sema: Add Kconfig support
2021-02-22 14:54:15 +01:00
MrKevinWeiss
37d640a5b6
sys/oneway-malloc: Add Kconfig support
2021-02-22 14:54:15 +01:00
MrKevinWeiss
bdaa517da1
sys/mineplex: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
1c03c0594a
sys/memarray: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
9c6e907a08
sys/matstat: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
8bc7893e92
sys/eepreg: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
e7f62e89fe
sys/cb_mux: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
f1c52296d8
sys/bloom: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
820283a12e
sys/bitfield: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
e0aea475be
sys/base64: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
64202fe091
sys/app_metadata: Add Kconfig support
2021-02-22 14:54:14 +01:00
MrKevinWeiss
e047d013a7
sys/analog_util: Add Kconfig support
2021-02-22 14:54:14 +01:00
Martine Lenders
de4ee0f934
Merge pull request #15562 from benpicco/socket_zep_register
...
socket_zep: register with netdev, provide EUI-64 as command line parameter
2021-02-20 20:32:01 +01:00
7c1cb66fe2
Merge pull request #15246 from haukepetersen/add_example_i2cscanner
...
examples: add I2C scanner
2021-02-19 15:02:47 +01:00
Martine Lenders
6dd49ead83
Merge pull request #16037 from miri64/shell/enh/kconfig-dep-config
...
shell/Kconfig: make config options usable with dependency resolution
2021-02-19 14:49:47 +01:00
Martine Lenders
561960769f
shell/Kconfig: make config options usable with dependency resolution
2021-02-19 13:22:47 +01:00
Martine Lenders
ecba5fa1d0
gnrc_pktbuf_static: expose _align() function to be used for tests
2021-02-19 12:23:22 +01:00
Francisco
87240837fa
Merge pull request #16044 from ant9000/fix_riotboot_dfu
...
sys/riotboot/flashwrite.c: add message to static assert
2021-02-19 08:29:41 +01:00
Antonio Galea
418c88eeb0
sys/riotboot/flashwrite.c: add message to static assert
...
static_assert as defined in c11 requires both an expression and a message.
The message is only optional from c17 onwards.
2021-02-18 18:33:35 +01:00
Cenk Gündoğan
896e44cf93
rpl: strenghen length checks for DAO and DAO-ACK
2021-02-18 15:47:53 +01:00
Hauke Petersen
5d9e9fb9d7
sys/shell/commands: add i2c_scanner deps to Kconfig
2021-02-18 13:22:54 +01:00
Martine Lenders
e740e75f1d
shell/Kconfig: fix SHELL_SHUTDOWN_ON_EXIT dependency
...
Symbol `CPU_NATIVE` does not exist within Kconfig.
2021-02-17 17:21:43 +01:00
José Alamos
093272c562
Merge pull request #16000 from jeandudey/2021_02_12-ieee802154-bitcaps
...
net/ieee802154/radio: use bitflags for capabilities
2021-02-17 16:56:25 +01:00
Jean Pierre Dudey
243de6e501
net/ieee802154/radio: use bitflags for capabilities
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-17 10:56:28 +01:00
Francisco Molina
3cd12d3e1b
sys/include/net/netstats: move xtimer header where it is needed
2021-02-16 18:18:21 +01:00
Leandro Lanzieri
4172066ab3
Merge pull request #15984 from MrKevinWeiss/pr/posix_sleep/kconfig
...
sys/posix_sleep: Add Kconfig support
2021-02-15 16:01:09 +01:00
Leandro Lanzieri
85da504d2d
Merge pull request #15947 from nmeum/pr/clif_get_attr_empty
...
clif: Don't access any data if input is empty
2021-02-15 13:53:40 +01:00
MrKevinWeiss
b8eb12d43b
sys/posix_sleep: add module to Kconfig
2021-02-15 12:24:38 +01:00
Sören Tempel
178c9eb745
gnrc_pktbuf: use _free function with gnrc_pktbuf_malloc
...
Otherwise the local mallocs variable is not decremented correctly (if
TEST_SUITES is defined) and the fuzzing setup (i.e. when MODULE_FUZZING
is defined) does not terminate. This regression was introduced in
3970b667aa
2021-02-12 18:15:40 +01:00
MrKevinWeiss
c84c34c005
sys/fmt: Add print_s64_dec to header
2021-02-10 13:32:54 +01:00
Marian Buschsieweke
d7f3e92c30
Merge pull request #15975 from maribu/ztimer-doc
...
sys/ztimer: clearify doc on clock ops
2021-02-10 12:23:55 +01:00
Leandro Lanzieri
609c9ada34
Merge pull request #15945 from nmeum/pr/clif_get_attr_bounds
...
clif: After incrementing pos, make sure it is still in bounds
2021-02-10 08:50:10 +01:00
Martine Lenders
1db480006c
Merge pull request #15939 from namib-project/dhcp-mud-fix
...
sys/net/dhcpv6: Fixes for MUD URL option
2021-02-10 08:30:06 +01:00
Marian Buschsieweke
e241b43d3f
sys/ztimer: clearify doc on clock ops
2021-02-09 22:34:04 +01:00
807b154fc4
Merge pull request #15956 from fjmolinas/pr_riotboot_uncrustify
...
sys/riotboot: uncrustify
2021-02-09 22:14:50 +01:00
Jan Romann
6a2aa7ad52
sys/net/dhcpv6: Fix MUD URL option
2021-02-09 19:47:47 +01:00
benpicco
5fba2c8387
Merge pull request #14448 from benpicco/l2-peerstats-rebased
...
net/netstats: L1/L2 per neighbor statistics
2021-02-09 14:54:53 +01:00
Francisco Molina
6a79d94f1a
sys/riotboot: uncrustify
2021-02-09 13:38:31 +01:00
Benjamin Valentin
75bb317eba
l2util: add l2util_addr_equal()
2021-02-09 12:27:58 +01:00
Benjamin Valentin
37dbbd969b
shell_commands: provide command for neighbor statistics
2021-02-09 12:27:58 +01:00
3b7e852773
net/gnrc/netif: hook up netstats_neighbor
2021-02-09 12:27:58 +01:00
f97267ba68
sys/net: add netstats_neighbor
2021-02-09 12:27:58 +01:00
Francisco Molina
6baadad152
sys/riotboot/flashwrite: when invalidating erase checksum as well
2021-02-09 11:11:47 +01:00
Martine Lenders
209b48e385
Merge pull request #15694 from maribu/gnrc_tx_sync
...
sys/net/gnrc/tx_sync: new module
2021-02-08 19:47:43 +01:00
Marian Buschsieweke
9895b840cd
sys/net: gnrc_tx_sync not implemented for gnrc_sixlowpand_frag_sfr
...
It is currently not possible to use both gnrc_tx_sync and
gnrc_sixlowpand_frag_sfr at the same time - this will be added in a follow
up PR.
2021-02-08 16:13:11 +01:00
Sören Tempel
0d141bf93a
clif: Don't access any data if input is empty
...
This is relevant as clif_decode_link may invoke clif_get_attr with
input_len == 0.
2021-02-08 13:42:18 +01:00
Sören Tempel
767e700a5f
clif: After incrementing pos, make sure it is still in bounds
...
While the for-loop condition does contain a bounds check, the pointer is
independently increment in the for-loop body. This increment therefore
requires a separate bounds check. Otherwise, the parsing loop may access
data outside the given buffer boundaries.
2021-02-08 11:29:44 +01:00
Jose Alamos
1af583a746
net/gnrc_lorawan: refactor gnrc_lorawan_pick_channel
2021-02-05 19:07:20 +01:00
Martine Lenders
492000f232
Merge pull request #15909 from leandrolanzieri/pr/ieee802154_security_radio_hal
...
net/ieee802154_security: remove radio hal dependency and cleanup
2021-02-05 17:08:52 +01:00
Cenk Gündoğan
e399ef5d76
uri_parser: terminate, if nothing to consume after scheme
2021-02-05 13:32:49 +01:00
Cenk Gündoğan
6f13325a52
uri_parser: do not parse path if end-of-uri
2021-02-05 13:24:36 +01:00
Cenk Gündoğan
1040cf9862
uri_parser: allow empty host part even if userinfo and port exist
2021-02-05 13:24:36 +01:00
Cenk Gündoğan
f9b8fadd85
uri_parser: check boundaries if host is empty, but userinfo exists
2021-02-05 13:24:36 +01:00
Sören Tempel
333572e091
uri_parser: check if uri is long enough to even contain a ://
...
Before attempting to access these characters. This fixes an
out-of-bounds read on the provided URI buffer.
2021-02-04 20:08:26 +01:00
Leandro Lanzieri
8a29cf285d
sys/shell: fix menuconfig symbol name
2021-02-04 12:46:19 +01:00
Leandro Lanzieri
67f36d78a9
sys/shell: document configs and add to Kconfig
2021-02-04 09:19:43 +01:00
Jose Alamos
9bdb58f37d
net/gnrc_lorawan: add channel_mask
2021-02-03 17:55:50 +01:00
Marian Buschsieweke
89c69c5450
sys/net/gnrc/tx_sync: new module
...
The new `gnrc_tx_sync` module allows users of the GNRC network stack to
synchronize with the actual transmission of outgoing packets. This is directly
integrated into gnrc_sock. Hence, if `gnrc_tx_sync` is used, calls to e.g.
sock_udp_send() will block until the network stack has processed the message.
Use cases:
1. Prevent packet drop when sending at high rate
- If the application is sending faster than the stack can handle, the
message queues will overflow and outgoing packets are lost
2. Passing auxiliary data about the transmission back the stack
- When e.g. the number of required retransmissions, the transmission time
stamp, etc. should be made available to a user of an UDP sock, a
synchronization mechanism is needed
3. Simpler error reporting without footguns
- The current approach of using `core/msg` for passing up error messages is
difficult to use if other message come in. Currently, gnrc_sock is
busy-waiting and fetching messages from the message queue until the number
of expected status reports is received. It will enqueue all
non-status-report messages again at the end of the queue. This has
multiple issues:
- Busy waiting is especially in lower power scenarios with time slotted
MAC protocols harmful, as the CPU will remain active and consume
power even though the it could sleep until the TX slot is reached
- The status reports from the network stack are send to the user thread
blocking. If the message queue of the user thread is full, the network
stack would block until the user stack can fetch the messages. If
another higher priority thread would start sending a message, it
would busy wait for its status reports to completely come in. Hence,
the first thread doesn't get CPU time to fetch messages and unblock
the network stack. As a result, the system would lock up completely.
- Just adding the error/status code to the gnrc_tx_sync_t would preallocate
and reserve memory for the error reporting. That way gnrc_sock does not
need to search through the message queue for status reports and the
network stack does not need to block for the user thread fetching it.
2021-02-03 15:16:42 +01:00
Francisco
3b2a55a923
Merge pull request #15865 from benpicco/pm_layered-default
...
cpu: make pm_layered a DEFAULT_MODULE
2021-02-03 08:17:29 +01:00
Martine Lenders
6da60c933d
Merge pull request #15802 from miri64/treewide/cleanup/cppcheck-whitelisted
...
treewide: re-uncrustify whitelisted files
2021-02-03 07:59:27 +01:00
benpicco
2313cefbd3
Merge pull request #15910 from maribu/sys-arduino-spi-fix
...
sys/arduino: Bug and style fixes in SPI
2021-02-02 23:41:04 +01:00
Benjamin Valentin
118cf0e9e6
riotboot_usb_dfu: depend on periph_pm
2021-02-02 23:40:21 +01:00
Benjamin Valentin
32c30aaeaa
pm_layered: depend on periph_pm
2021-02-02 23:40:21 +01:00
Martine Lenders
7e3846b6a4
ztimer: apply uncrustify patches
2021-02-02 22:21:15 +01:00
Marian Buschsieweke
e0f457663c
Merge pull request #15901 from OTAkeys/pr/ztimer_rmutex_lock_timeout
...
ztimer: add ztimer_rmutex_lock_timeout()
2021-02-02 20:47:53 +01:00
Vincent Dupont
751a366931
ztimer: fix uncrustify issue in util.c
2021-02-02 10:52:10 +01:00
Vincent Dupont
fb4d2e509a
ztimer: add ztimer_rmutex_lock_timeout()
...
Similar to xtimer_rmutex_lock_timeout()
2021-02-02 10:51:50 +01:00
Marian Buschsieweke
45ed8bc330
sys/arduino: Bug and style fixes in SPI
...
- set is_transaction before releasing the SPI bus (and the mutex) to avoid
data races
- adapt switch indent to coding convention
2021-02-02 09:45:46 +01:00
Leandro Lanzieri
2f28a91c4f
net/ieee802154/security: make default cipher_ops implementations private
2021-02-02 09:16:50 +01:00
Leandro Lanzieri
e31daf1583
net/ieee802154: remove dependency of radio HAL in security
2021-02-02 09:16:50 +01:00
5b0eaf7cd8
riotboot/flashwrite: Remove last dependencies on flashpage size
2021-02-01 16:14:07 +01:00
1bde5296fd
Merge pull request #14987 from bergzand/pr/riscv/semihosting
...
stdio_semihosting: Extend with RISC-V support
2021-01-27 18:49:35 +01:00
0a6c9c4ec0
stdio_semihosting: Extend with RISC-V support
...
RISC-V support semihosting in very similar way as the cortex-m
microcontrollers. The code calls a breakpoint instruction and the
attached debugger reads/writes registers and memory for stdio.
The RISC-V architecture doesn't support a call number with the EBREAK
instruction, to allow the debugger to detect a semihosting break point,
the EBREAK instruction is wrapped in a SLLI and SRAI instruction. These
use x0 as output register, making them NOP instructions.
One caveat when using this is that the RISC-V core traps the EBREAK
instruction with trap code 3 when no debugger is attached. Restarting
the application with the debugger attached avoids this.
2021-01-27 17:52:19 +01:00
Benjamin Valentin
9c1455d55f
cpu: make pm_layered a DEFAULT_MODULE
...
Allow to disable pm_layered in the bootloader to save some ROM.
2021-01-27 13:21:20 +01:00
benpicco
4509dc6812
Merge pull request #15863 from btcven/2020_01_26-ieee-sfd-phr
...
ieee802154: add SFD and length of PHR for MR-FSK.
2021-01-27 12:31:12 +01:00
Jean Pierre Dudey
38ade8d2e9
ieee802154: add MR-FSK SFD values for 2FSK
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2021-01-27 11:52:53 +01:00
Jean Pierre Dudey
9fe6b9ac99
ieee802154: add MR-FSK PHR length definition
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2021-01-27 11:52:53 +01:00
Francisco
dc801b9dde
Merge pull request #15817 from leandrolanzieri/pr/kconfig/sys_crypto
...
sys/{crypto, hashes, random}: add modules to Kconfig
2021-01-27 10:20:11 +01:00
ce97e9d8ce
Merge pull request #15859 from fjmolinas/pr_newlib_feature
...
treewide: model newlib as a FEATURE
2021-01-27 10:06:08 +01:00
Francisco Molina
63a2a6ce1b
treewide: model newlib as a FEATURE
2021-01-27 09:24:25 +01:00
Leandro Lanzieri
434b6b68d5
Merge pull request #15790 from akshaim/Kconfig_skald_update
...
net/skald: Update Kconfig implementation
2021-01-26 20:46:27 +01:00
Leandro Lanzieri
5c4df6078e
sys/random: add modules to Kconfig
2021-01-26 17:40:53 +01:00
Leandro Lanzieri
34594ae1dc
sys/luid: add module to Kconfig
2021-01-26 17:40:30 +01:00
Leandro Lanzieri
0fb2711a15
sys/hashes: add module to Kconfig
2021-01-26 17:40:29 +01:00
Leandro Lanzieri
d90ac484a3
sys/crypto: add modules to Kconfig
2021-01-26 17:39:44 +01:00
Akshai M
42eb6c4097
net/lorawan : Update documentation
...
Marked as non-supported:
LORAMAC_DEFAULT_ADR_ACK_LIMIT
LORAMAC_DEFAULT_ADR_ACK_DELAY
LORAMAC_DEFAULT_ADR_TIMEOUT
2021-01-26 16:56:05 +01:00
Akshai M
9600ebf536
net/lorawan : Expose to Kconfig
2021-01-26 16:56:02 +01:00
Akshai M
a2f505f116
net/lorawan : Move 'LORAMAC_DEFAULT_MIN_RX_SYMBOLS' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
216956d7b0
net/lorawan : Move 'LORAMAC_DEFAULT_SYSTEM_MAX_RX_ERROR' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
ed269a7fd7
net/lorawan : Move 'LORAMAC_DEFAULT_MAX_FCNT_GAP' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
85c4b5eb3b
net/lorawan : Move 'LORAMAC_DEFAULT_JOIN_DELAY2' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
b6e4e74a87
net/lorawan : Move 'LORAMAC_DEFAULT_JOIN_DELAY1' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
ed1b86492f
net/lorawan : Move 'LORAMAC_DEFAULT_JOIN_PROCEDURE' to 'CONFIG_'
...
Added symbols 'CONFIG_LORAMAC_DEFAULT_JOIN_PROCEDURE_XXX'
for Kconfig exposure
2021-01-26 16:52:59 +01:00
Akshai M
81dac00d5c
net/lorawan : Move 'LORAMAC_DEFAULT_RX2_FREQ' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
d5086ecf60
net/lorawan : Move 'LORAMAC_DEFAULT_RX2_DR' to 'CONFIG_'
...
Added symbols 'CONFIG_LORAMAC_DEFAULT_RX2_DR_XX' to define
choice in Kconfig
2021-01-26 16:52:58 +01:00
Akshai M
d48cee7c2a
net/lorawan : Move 'LORAMAC_DEFAULT_RX1_DELAY' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
ca4acbff12
net/lorawan : Move 'LORAMAC_DEFAULT_LINKCHK' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
e93c362df2
net/lorawan : Move 'LORAMAC_DEFAULT_RETX' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
97d873a5bd
net/lorawan : Move 'LORAMAC_DEFAULT_ADR' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_ADR' to 'CONFIG_' namespace and model
'CONFIG_LORAMAC_DEFAULT_ADR' as BOOL for Kconfig
2021-01-26 16:52:58 +01:00
Akshai M
d2d90fbce5
net/lorawan : Move 'LORAMAC_DEFAULT_TX_MODE' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_TX_MODE' to 'CONFIG_' and added symbols
for Kconfig exposure
2021-01-26 16:52:58 +01:00
Akshai M
aa3b1da0c4
net/lorawan : Move 'LORAMAC_DEFAULT_TX_PORT' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
3a6c4f2f71
net/lorawan : Move 'LORAMAC_DEFAULT_TX_POWER' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_TX_POWER' to 'CONFIG_' namespace and
assign choices for Kconfig exposure
2021-01-26 16:52:58 +01:00
Akshai M
55f196095d
net/lorawan : Move 'LORAMAC_DEFAULT_DR' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_DR' to 'CONFIG_' and enable options for
Kconfig
2021-01-26 16:52:58 +01:00
Akshai M
1befae9022
net/lorawan : Invert 'LORAMAC_DEFAULT_PUBLIC_NETWORK'
...
Introduced a bool 'LORAMAC_DEFAULT_PRIVATE_NETWORK' to invert
the semantics of 'LORAMAC_DEFAULT_PUBLIC_NETWORK'. Move
'LORAMAC_DEFAULT_PRIVATE_NETWORK' to 'CONFIG_' namespace.
2021-01-26 16:52:58 +01:00
Akshai M
3c5c429541
net/lorawan : Move 'LORAMAC_DEFAULT_NETID' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
e46c4401a9
net/lorawan : Move 'LORAMAC_DEFAULT_DEVICE_CLASS' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_DEVICE_CLASS' to 'CONFIG_' and added
additional symbols for Kconfig exposure.
2021-01-26 16:52:57 +01:00
Akshai M
9e626f471a
net/lorawan : Move 'LORAMAC_DEV_ADDR_DEFAULT' to 'CONFIG_'
2021-01-26 16:52:57 +01:00
Akshai M
50e979c600
net/lorawan : Move 'LORAMAC_NWK_SKEY_DEFAULT' to 'CONFIG_'
2021-01-26 16:52:57 +01:00
Akshai M
43d7f28e63
net/lorawan : Move 'LORAMAC_APP_SKEY_DEFAULT' to 'CONFIG_'
2021-01-26 16:52:57 +01:00
Akshai M
d138fa9aad
net/lorawan : Move 'LORAMAC_APP_KEY_DEFAULT' to 'CONFIG_'
2021-01-26 16:52:57 +01:00
Akshai M
bcb0ed38ff
net/lorawan : Move 'LORAMAC_APP_EUI_DEFAULT' to 'CONFIG_'
2021-01-26 16:52:57 +01:00
Akshai M
5b4a873de5
net/lorawan : Move 'LORAMAC_DEV_EUI_DEFAULT' to 'CONFIG_'
2021-01-26 16:52:57 +01:00
Akshai M
3ecd304354
net/gnrc_lorawan : String keywords for keys
...
Swapped hex input for keys with string keywords.
2021-01-26 16:52:57 +01:00
Akshai M
a23dfb7ab9
net/skald : Update kconfig
...
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2021-01-26 16:17:18 +01:00
Akshai M
f7aff3c0aa
net/skald : Add CONFIG_SKALD_ADV_CHANNELS to allow ordered list
...
Added `CONFIG_SKALD_ADV_CHANNELS` which is then parsed to
and ordered list `SKALD_ADV_CHAN`
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2021-01-26 16:17:17 +01:00
Martine Lenders
8e47621e7c
Merge pull request #15839 from maribu/gnrc_pktbuf_release_error
...
sys/net/gnrc_pktbuf: deduplicate code
2021-01-26 15:23:50 +01:00
Marian Buschsieweke
3970b667aa
sys/net/gnrc_pktbuf: deduplicate code
...
Implement gnrc_pktbuf_release_error() in gnrc_pktbuf once, rather than providing
two implementations in gnrc_pktbuf_static and gnrc_pktbuf_malloc
2021-01-26 10:50:19 +01:00
Hauke Petersen
4540b6273b
ble/skald: switch from xtimer to ZTIMER_MSEC
2021-01-26 09:34:09 +01:00
Benjamin Valentin
d8918c24fa
socket_zep: register with netdev
2021-01-25 22:59:01 +01:00
Francisco
de9f29cf42
Merge pull request #15835 from leandrolanzieri/pr/makefile/fix_default_modules_in_usemodules
...
Makefile.include: avoid recursive expansion of USEMODULE
2021-01-25 21:50:03 +01:00
benpicco
83201ddb00
Merge pull request #15760 from maribu/sock-aux-rssi
...
sys/net/sock: add sock_aux_rssi
2021-01-25 18:51:11 +01:00
benpicco
1862a73d41
Merge pull request #15844 from benpicco/sys/oneway-malloc_align
...
sys/oneway-malloc: only allocate word-aligned chunks
2021-01-25 14:31:37 +01:00
Benjamin Valentin
65ab38a894
sys/oneway-malloc: only allocate word-aligned chunks
...
If an unevenly sized allocation is requested, the next buffer handed
out would start at an unaligned address.
Fix this by rounding up to the next word-sized allocation size.
2021-01-25 12:05:05 +01:00
Leandro Lanzieri
91ff4e5ce5
sys/Makefile.dep: default saul_init_devs to y when saul_default is used
2021-01-25 09:17:00 +01:00
Fabian Hüßler
7d618afa17
nrf24l01p_ng: make use of netdev_register()
2021-01-24 20:49:39 +01:00
fabian18
f7a77ebb04
drivers/nrf24l01p_ng: netdev driver for nrf24l01+
...
The driver uses the netdev interface. Due to the limited
capabilities of the transceiver (32 byte FIFO and no source address in the layer2 frame),
it relies on 6LowPAN compression and adds the source address to the frame for that.
2021-01-24 20:49:39 +01:00
Martine Lenders
879fbc179e
Merge pull request #15755 from janosbrodbeck/pr/dtls/get_event_session
...
sock/async: add function to retrieve session object of current DTLS event
2021-01-22 10:51:51 +01:00
János Brodbeck
050b268705
sock/async: fix typo in doc of sock_dtls_set_cb
2021-01-21 19:03:41 +01:00
János Brodbeck
80d592b1b8
sock/async: introduce function to retrieve session of current DTLS event
2021-01-21 18:58:12 +01:00
Francisco
1d9b898e9f
Merge pull request #15717 from leandrolanzieri/pr/kconfig/drivers_s
...
drivers/s*: add modules to Kconfig
2021-01-21 16:49:21 +01:00
Benjamin Valentin
b24480538a
nanocoap: add coap_opt_put_string_with_len()
2021-01-21 15:17:28 +01:00
Marian Buschsieweke
90700f1cec
Merge pull request #15823 from maribu/fmt-table-bugfix
...
sys/fmt_table: fix infinite loop
2021-01-21 13:15:52 +01:00
Leandro Lanzieri
52b8bca84e
net/lora: add module to Kconfig
2021-01-21 11:22:33 +01:00
Leandro Lanzieri
0ed66123d9
sys/iolist: add module to Kconfig
2021-01-21 11:22:32 +01:00
Leandro Lanzieri
a492400cee
drivers/slipdev: add modules to Kconfig
2021-01-21 11:22:31 +01:00
Leandro Lanzieri
95206d0346
kconfig/saul: select phydat and enable saul_registry by default
2021-01-21 11:22:30 +01:00
Marian Buschsieweke
00a8a8bd83
sys/fmt_table: fix infinite loop
2021-01-21 10:03:44 +01:00
Francisco
5c5ec632a5
Merge pull request #15716 from leandrolanzieri/pr/kconfig/ztimer
...
sys/ztimer: add modules to Kconfig
2021-01-20 15:31:20 +01:00
a1250963d4
Merge pull request #15780 from haukepetersen/opt_ztimer_isset
...
ztimer: add ztimer_is_set() to user API
2021-01-20 12:42:21 +01:00
Marian Buschsieweke
51db33375a
sys/bit: provide CPU_HAS_SRAM_BITBAND
...
CPU_HAS_SRAM_BITBAND can be used to check whether bit-banding is supported for
all of SRAM. With partially supported bit-banding, this feature is more of a
foot gun that a valuable tool.
2021-01-20 09:18:09 +01:00
Martine Lenders
eb30b0b2e2
Merge pull request #15792 from haukepetersen/fix_evtimer_moddep
...
sys/evtimer: fix module dependencies
2021-01-19 12:45:09 +01:00
Francisco
0e5ba63384
Merge pull request #15641 from bergzand/pr/schedstatistics/remove_idle_runtime
...
schedstatistics: Log sleep tick statistics
2021-01-19 11:19:05 +01:00
Francisco
e046e01254
Merge pull request #15683 from bergzand/pr/memarray/extender
...
memarray: Add functions to extend and reduce the pool with new memory areas
2021-01-19 11:18:47 +01:00
Hauke Petersen
8f5d366fe9
sys/evtimer: fix module dependencies
2021-01-19 11:07:20 +01:00
Bas Stottelaar
9bc7dd04e6
sys/saul_reg: add saul_reg_find_type_and_name
2021-01-18 22:28:28 +01:00
Hauke Petersen
f5de257d58
ztimer: expose ztimer_is_set() to public API
2021-01-18 17:50:50 +01:00
benpicco
5fe6483403
Merge pull request #15762 from benpicco/sys/sema_inv
...
sys/sema_inv: add inverse Semaphore
2021-01-18 15:57:01 +01:00
Leandro Lanzieri
61a10db288
sys/xtimer/kconfig: fix dependencies
2021-01-18 14:14:13 +01:00
Leandro Lanzieri
6625a15bf6
sys/ztimer: add modules to Kconfig
2021-01-18 14:14:13 +01:00
Leandro Lanzieri
abe90f6aeb
sys/frac: add module to Kconfig
2021-01-18 14:14:13 +01:00
c579dbe953
schedstatistics: Log sleep tick statistics
2021-01-18 11:14:23 +01:00
Benjamin Valentin
5602587dd7
sys/sema_inv: add inverse Semaphore
...
It is often desiderable to sync on multiple threads, e.g. there can be a controller
thread that waits for `n` worker threads to finish their job.
An inverse semaphore provides an easy primitive to implement this pattern.
After being initialized with a value `n` (in counter mode), a call to `sema_inv_wait()`
will block until each of the `n` threads has called `sema_inv_post()` exactly once.
There are situations where workers might post an event more than once
(unless additional state is introduced).
For this case, the alternative mask mode is provided.
Here the inverse semaphore is initialized with a bit mask, each worker can clear one
or multiple bits with `sema_inv_post_mask()`. A worker can clear it's bit multiple times.
2021-01-17 00:17:58 +01:00
Hauke Petersen
ed2e40df63
Merge pull request #15781 from haukepetersen/add_sema_getvalue
...
sys/sema: add sema_get_value()
2021-01-16 13:03:03 +01:00
Hauke Petersen
606bcd66da
posis/semaphore: use sema_get_value()
2021-01-15 16:17:25 +01:00
Hauke Petersen
7b0c5f9d5d
sys/sema: add same_get_value()
2021-01-15 15:22:31 +01:00
cb221aaaf0
memarray: Add extend and reduce functions
2021-01-15 11:39:08 +01:00
a2ce2e9cfb
memarray: Add memarray_available function
2021-01-15 11:39:07 +01:00
5495da5840
memarray: use memarray_free to init elements
2021-01-15 11:20:29 +01:00
Jose Alamos
0bee606bd4
gcoap: remove gcoap_add_qstring
...
This feature was marked to be deprecated after the release 2020.10.
Therefore this commit removes that feature.
2021-01-14 16:03:00 +01:00
Francisco Molina
960e0c5f43
sys/ieee802154/submac: add handling of invalid CRC frames
2021-01-13 23:42:45 +01:00
Francisco Molina
fe1e16cdc7
sys/net/iee802154/radio: add IEEE802154_RADIO_INDICATION_CRC_ERROR
2021-01-13 23:42:41 +01:00
Jose Alamos
49f4ecc595
ieee802154: add helpers for RSSI and dBm conversion
2021-01-13 14:14:45 +01:00
Marian Buschsieweke
c0765d9e07
sys/net/grnc: implement sock_aux_rssi
2021-01-13 13:29:13 +01:00
Marian Buschsieweke
f0ba796e5d
sys/net/sock: add sock_aux_rssi
...
Allow accessing the RSSI value of received UDP datagrams / IP packets with the
sock API.
2021-01-13 13:29:13 +01:00
Marian Buschsieweke
582f8d8430
Merge pull request #15754 from maribu/rssi
...
sys/net/gnrc: fix in-band signaling of no RSSI
2021-01-13 13:28:06 +01:00
Marian Buschsieweke
b50964f6fc
sys/net/gnrc: fix in-band signaling of no RSSI
...
Previously a value of 0 was used for the RSSI to signal that this value is not
present in `gnrc_netif_hdr_t`. However, an RSSI of 0 dBm is legal and even very
plausible data.
This commit defines `GNRC_NETIF_HDR_NO_RSSI` as `INT16_MIN`, which is below the
noise floor in the vacuum of outer space and hence impossible to receive.
For consistency, also GNRC_NETIF_HDR_NO_LQI is defined.
2021-01-13 08:53:33 +01:00
Marian Buschsieweke
8f24cc840c
sys/net/gnrc/sock: cleanup & fix aux handling
...
The logic used to check whether the RX timestamp was provided in the GNRC
implementation of `sock_ip_recv_buf_aux()` is incorrect: It still uses in-band
signalling via a timestamp of zero, but a dedicated flag was added to allow for
timestamps of zero.
Additionally, it is not necessary to check if a bit is set only to clear it -
clearing it unconditionally is faster and smaller.
2021-01-12 21:31:24 +01:00
dylad
25d0dffa61
Kconfig: add Kconfig support for DFU
2021-01-12 11:34:22 +01:00
dylad
beb0fb752c
sys/riotboot: add DFU support to riotboot
2021-01-12 11:34:22 +01:00
dylad
f3908bed9f
sys/auto_init: add support for USB DFU
2021-01-12 11:34:22 +01:00
dylad
669a8ec7b3
usbus/dfu: introduce initial Device Firmware Upgrade support for USBUS
2021-01-12 11:34:22 +01:00
1be0a29f62
Merge pull request #15742 from aabadie/pr/sys/posix_fcntl_headerguard_fix
...
[RFC] sys/posix/fcntl: fix headerguard
2021-01-12 10:12:19 +01:00
Dylan Laduranty
916f554d2a
Merge pull request #14629 from Ollrogge/usb_hid_pr
...
USB HID minimal implementation
2021-01-11 20:17:52 +01:00
Benjamin Valentin
89c97ae59a
sys/od: allow to specify address offset with od_hex_dump_ext()
...
When dumping memory the printed addresses always start with `00000000`.
This can be very confusing and lead to errors.
Allow the user to specify a starting address of the printed memory that
will be used instead.
By introducing a wrapper function, existing users are unaffected.
2021-01-11 14:35:40 +01:00
f496aef7cc
sys/posix/fcntl: fix headerguard
2021-01-11 13:48:09 +01:00
Build Bot
122d7a0f35
usbus/hid: add minimal implementation
2021-01-11 00:24:30 +01:00
a57b88d6cc
usbus: Use atomic_utils for endpoint flag operations
2021-01-10 11:40:23 +01:00
04aaed6f86
sys/shell/nimble_netif: don't cast result of atoi
2021-01-08 14:37:33 +01:00
4c4a396120
sys/shell/sht1x: fix typo (PARMS => PARAMS)
2021-01-08 10:15:33 +01:00
9a9530b4b5
sys/entropy_source: fix typo (sates => states)
2021-01-08 10:15:33 +01:00
Martine Lenders
640ff4f5d8
Merge pull request #15609 from maribu/ethernet-rx-timestamp
...
sys/net/gnrc/netif/ethernet: Support RX timestamp
2021-01-07 19:53:52 +01:00
Marian Buschsieweke
f6bca70d11
sys/net/gnrc/netif/ethernet: Support RX timestamp
2021-01-06 20:30:14 +01:00
Martine Lenders
ce0a363f62
Merge pull request #15690 from janosbrodbeck/pr/dtls/session_get_set_udp_ep
...
sock/dtls: add getter/setter for the remote UDP endpoint of sock_dtls_session_t
2021-01-05 14:23:51 +01:00
Marian Buschsieweke
8309f42f9b
Merge pull request #15643 from maribu/atomic_utils
...
sys/atomic_utils: change API to also return previous value
2021-01-05 12:04:31 +01:00
János Brodbeck
a72e053d32
sock/dtls: add example of a blocking handshake to the doc
2021-01-04 20:22:58 +01:00
