01a6044400
boards/sodaq: Add DMA to common SPI config
2020-06-16 09:44:14 +02:00
Kees Bakker
446892a356
boards/sodaq*: correct the XTIMER defines
...
There is now a common set of defines for all Sodaq boards. This commit
removes old configurations.
2020-06-15 21:10:09 +02:00
Kees Bakker
76a4f145d9
boards/sodaq-sff: add support for SODAQ SFF
...
The following features were tested (briefly):
* UART (the first, and the second connected to the UBlox SARA)
* xtimer
* I2C (using driver BMX280 and SHT2x)
* ADC
* WDT
* RGB-LEDs
SPI isn't tested, but it should be working.
2020-06-15 21:10:09 +02:00
51c5497c5a
common/arduino-mkr: add DMA triggers to spi config
2020-06-14 16:21:32 +02:00
757d727276
common/saml1x: Add DMA triggers to spi config
2020-06-14 16:21:32 +02:00
153b5ae9dd
sodaq-one: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
1b29268584
serpente: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
8df94ecf18
sensebox_samd21: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
878a8e8c97
samr34-xpro: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
6515009d3d
samr30-xpro: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
cbb3e386b4
saml21-xpro: add DMA triggers to spi config
2020-06-14 14:56:22 +02:00
35bf7d5b41
same54-xpro: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
fc302edc6f
samd21-xpro: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
9a3a5fc343
hamilton: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
c8d5b2cbb2
feather-m0: add DMA triggers to spi config
2020-06-14 14:56:20 +02:00
5c3dad733d
samr21-xpro: Add DMA config for SPI peripherals
2020-06-14 14:56:20 +02:00
benpicco
8ed8775c8e
Merge pull request #14269 from benpicco/cpu/sam0_common/timer_drop_prescaler
...
cpu/sam0_common: drop prescaler from timer config
2020-06-12 14:16:59 +02:00
Francisco
01d0e30229
Merge pull request #14244 from fjmolinas/pr_samr21_usec_min
...
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-12 09:24:52 +02:00
Benjamin Valentin
54b57bd97f
cpu/sam0_common: drop prescaler from timer config
...
since c05984b341
2020-06-11 19:29:43 +02:00
Benjamin Valentin
871107e67f
boards/weact-f411ce: enable automatic reset to bootloader
2020-06-11 16:37:30 +02:00
Francisco Molina
d32467bf03
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-11 15:59:24 +02:00
Benjamin Valentin
2325dba871
makefiles/bossa: move USB reset logic to common file
2020-06-11 11:56:35 +02:00
Francisco
52bcdff113
Merge pull request #14245 from fjmolinas/pr_iotlab_baud
...
boards/common/iotlab: don't enforce BAUD
2020-06-11 09:13:03 +02:00
Marian Buschsieweke
1cf1f75db1
Merge pull request #14240 from benpicco/boards/WeAct-f411_dynamic_flash
...
boards/weact-f411ce: determine flash size at run-time
2020-06-10 22:22:59 +02:00
benpicco
75d82cc9b8
Merge pull request #14209 from btcven/2020_06_04-common-cfg
...
boards/cc26x2_cc13x2-based: move config to common directory
2020-06-10 15:32:11 +02:00
Francisco Molina
f556eb6958
boards/common/iotlab: don't enforce BAUD
2020-06-10 13:32:05 +02:00
Benjamin Valentin
59a41968b5
boards/weact-f411ce: determine flash size at run-time
...
The pad for SPI-Flash on the WeAct-f411ce does not come pre-populated.
The user has to manually solder a SPI-flash chip on the board, so specifying
a size here makes no sense.
Instead, rely on automatic detection of the flash size at run-time.
2020-06-10 12:10:29 +02:00
Leandro Lanzieri
58cd126517
Merge pull request #14210 from btcven/2020_06_04-cc26xx_cc13xx_kconfig
...
boards/cc26xx_cc13xx-based: model features in Kconfig
2020-06-10 11:27:31 +02:00
Jean Pierre Dudey
3f2be3784b
boards/cc2650stk: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
b87efa3c4b
boards/cc2650-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
eb599fd5dc
boards/cc1352p-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
6db36b75b4
boards/cc1352-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
ef1fdb5ab4
boards/cc1312-launcpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Kees Bakker
723fe93850
boards/common/sodaq: add XTIMER_DEV and make it equal to other SAMD21
...
For some reason this was looked over a while back.
This resolves issue #14217
2020-06-07 22:25:30 +02:00
benpicco
cb11b2d33f
Merge pull request #14198 from maribu/wemos-zero
...
boards: Add support for the wemos-zero board
2020-06-05 17:55:43 +02:00
Jean Pierre Dudey
283aacbecd
boards/cc26x2_cc13x2-based: move config to common
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-04 17:12:52 -05:00
Marian Buschsieweke
b44ac93558
boards/serpente: Deduplicate serial/programmer handling
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
17b890c16e
boards/{arduino,wemos}-zero: Dedpulicated code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
8b9a98233e
boards: Add support for the WeMos-Zero
...
This is an Arduino Zero clone without the embedded debugger. Thus, it will be
flashed by default using the U2F bootloader and uses by default USB CDC ACM for
STDIO.
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
de189a33f4
boards/arduino-zero: Factor out common code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
fc91e8019e
Merge pull request #12778 from benpicco/boards_WeAct-f411ce
...
boards: add WeAct-f411ce
2020-06-04 13:06:25 +02:00
Benjamin Valentin
b20ec93991
boards: add WeAct-f411ce board
...
The WeAct-F411CE is a blackpill-like board with a STM32F411CE.
It can be flashed using the vendor-provided bootloader.
2020-06-04 12:39:14 +02:00
Kevin "Tristate Tom" Weiss
972d9441ce
Merge pull request #13404 from leandrolanzieri/pr/boards/samr21-xpro/features_kconfig
...
boards/samr21-xpro: Model features in Kconfig
2020-06-03 09:39:41 +02:00
954ac22c45
Merge pull request #13865 from benpicco/usb_custom_id
...
USB VID/PID: allow for boards to define default custom VID/PID
2020-06-02 18:42:37 +02:00
Leandro Lanzieri
4c74881904
boards/samr21-xpro: Add board specific Kconfig symbols
2020-06-02 17:42:16 +02:00
Benjamin Valentin
cb21aea5f6
boards/serpente: properly configure USB ID
2020-06-02 14:17:55 +02:00
02ce7c0332
Merge pull request #14161 from bergzand/pr/nrf52840dk/move_spi_flash_periph
...
nrf52840dk: move SPI flash to SPIM2 peripheral
2020-06-02 13:14:35 +02:00
Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
Marian Buschsieweke
dfa6863275
cpu/atmega{1281,2560}: Relocate default timer config
2020-05-28 16:27:08 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
