Benjamin Valentin d213bbc6f5 Revert "drivers/hd44780: add short delay after each character" ... This reverts commit cf01c743a8. Adding an unexplained delay seemed wrong in the first place, but it fixed the display on the MCB2388. Turns out the display was erroneously operating in 8-bit mode due to the uninitialized flag register. Why the delay helped here I don't know. But with #12634 fixing this, this hack is not needed anymore.		2019-11-07 22:40:01 +01:00
..
ad7746	drivers: adcxx1c, ads101x, ad7746: Change I2C macro to DEV	2019-04-08 14:08:07 +02:00
adcxx1c	drivers/adcxxc1: expose configuration via config group	2019-05-08 15:22:41 +02:00
ads101x	drivers: adcxx1c, ads101x, ad7746: Change I2C macro to DEV	2019-04-08 14:08:07 +02:00
adt7310	drivers/adt7310: Replace binary representation	2019-04-25 21:18:36 +02:00
adxl345	drivers/adxk345: include copy of params in dev struct	2019-01-06 17:24:24 +01:00
apa102	drivers/apa102: do normal assignment instead of memcpy	2019-01-10 19:43:43 +01:00
at	driver/at: add return code for CME/CMS errors	2019-06-25 09:59:27 +02:00
at30tse75x
at86rf2xx	drivers/at86rf2xx: add support for ATmegaRF MCUs	2019-10-26 23:10:18 +02:00
ata8520e	drivers/ata8520e: fix potentially unused variables	2019-10-22 19:19:36 +02:00
bh1750fvi	drivers/bh1750fvi: change prototype of bh1750fvi_init	2019-01-07 21:37:02 +01:00
bmp180	drivers/bmp180: fix potentially use of uninitialized variable	2019-10-22 19:30:12 +02:00
bmx055	drivers/bmx055: do normal assignment instead of memcpy	2019-01-10 19:43:43 +01:00
bmx280	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
can_trx
cc1xxx_common	gnrc: use gnrc_netif_default_init() for all implementations	2019-11-07 11:00:36 +01:00
cc110x	drivers/cc110x: Use NETOPT_MAX_PDU_SIZE	2019-10-18 17:57:36 +02:00
cc2420	drivers/cc2420: don't append to FIFO if iol->iol_len == 0	2019-04-02 16:00:03 +02:00
ccs811	drivers/ccs811: remove unnecessary casts	2019-01-06 14:41:47 +01:00
dht	drivers/dht: Fixed magic numbers & missing doc	2019-07-29 10:39:50 +02:00
ds18	drivers/ds18: fix ds18_read with negative temperatures	2019-05-16 20:12:22 +02:00
ds75lx	drivers: sys: add SAUL support for ds75lx sensor	2019-05-22 16:54:20 +02:00
ds1307
ds3234	drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC	2019-02-19 11:57:40 +01:00
dsp0401
dynamixel
enc28j60	enc28j60: use ethernet address helper functions	2019-06-10 21:07:02 +02:00
encx24j600	drivers/encx24j600: Allow empty iolist elements	2019-04-01 16:51:39 +02:00
ethos	drivers: sys: replace USE_ETHOS_FOR_STDIO macro by MODULE_STDIO_ETHOS	2019-06-23 22:16:03 +02:00
feetech
fxos8700
grove_ledbar
hd44780	Revert "drivers/hd44780: add short delay after each character"	2019-11-07 22:40:01 +01:00
hdc1000	drivers/hdc1000: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
hih6130	drivers/hih6130: adapt to new i2c API	2018-07-25 12:01:40 +02:00
hts221	drivers/hts211: fix CTRL_REG2_OS_EN	2019-02-14 18:03:35 +01:00
ina220
ina3221	drivers/ina3221: Added SAUL integration	2019-11-05 12:37:41 +01:00
include	drivers/include/hd44780: avoid use of magic numbers	2019-11-06 16:25:27 +01:00
io1_xplained
isl29020	drivers: replace memset by simple assignments	2019-01-07 21:59:25 +01:00
isl29125
jc42
kw2xrf	drivers/kw2xrf: use TMR3 instead TMR4 to detect ACK timeout	2019-10-02 15:09:18 +02:00
l3g4200d	drivers/l3g4200d: fix typo in src file header	2018-09-26 11:00:48 +02:00
lc709203f
lis2dh12	drivers/lis2dh12: added I2C mode	2019-10-02 11:16:39 +02:00
lis3dh	drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ	2018-08-29 08:53:20 +02:00
lis3mdl
lpd8808	drivers/lpd8808: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
lpsxxx	drivers/lpsxxx: add support for lps22hb	2019-03-20 14:43:37 +01:00
lsm6dsl	drivers/lsm6dsl: eliminate and correct casts	2019-01-06 16:56:17 +01:00
lsm303dlhc	drivers/lsm303dlhc: correct cast of phydat_t*	2019-01-06 17:08:04 +01:00
ltc4150	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
mag3110	drivers/mag3110: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
mma8x5x	drivers/mma8x5x: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
mma7660	drivers/mma7660: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
motor_driver	drivers: add licence to motor_driver source files	2019-04-13 00:29:58 +02:00
mpl3115a2	drivers/mpl3115a2: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
mpu9x50	drivers/mpu9x50: Correct read_temperature	2019-10-17 14:04:43 +02:00
mq3
mrf24j40	Merge pull request #12431 from benpicco/mrf24j40-fix_reset	2019-10-14 17:21:17 +02:00
mtd
mtd_flashpage	drivers: add mtd_flashpage driver	2019-09-10 13:26:05 +02:00
mtd_sdcard	mtd_sdcard: fix printf format strings	2018-08-06 12:19:44 +02:00
mtd_spi_nor
my9221	drivers/my9221: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
ncv7356	ncv7356: add driver for ncv7356 SW CAN transceiver	2019-08-21 11:05:51 +02:00
netdev_eth	drivers/netdev_eth: Use NETOPT_MAX_DPU_SIZE	2019-02-18 20:18:56 +01:00
netdev_ieee802154	drivers/netdev_ieee802154: add mac header filter	2019-03-04 13:21:43 +01:00
netdev_layer
nrf24l01p	drivers/nrf24l01p: fix potentially undefined return value	2019-10-28 14:46:57 +01:00
nvram
nvram_spi
opt3001	drivers/opt3001: Initial support	2019-10-02 10:06:28 +02:00
pca9685	drivers: support for PCA9685 PWMs	2019-09-12 19:11:52 +02:00
pcd8544	drivers/pcd8544: replace char by uint8_t for bytes	2019-04-25 23:42:30 +02:00
periph_common	periph_common/rtc: add rtc_tm_compare()	2019-11-05 12:52:45 +01:00
ph_oem	drivers/ph_oem: Initial implementation of the pH OEM sensor	2019-09-05 12:47:10 +02:00
pir	drivers: replace memset by simple assignments	2019-01-07 21:59:25 +01:00
pn532
pulse_counter	drivers/pulse_counter: refactor the prototypes of read funcs	2019-01-09 23:06:54 +01:00
rgbled
rn2xx3	drivers/rn2xx3: cleanup sleep function	2019-10-17 10:02:11 +02:00
saul	drivers/ina3221: Added SAUL integration	2019-11-05 12:37:41 +01:00
sdcard_spi	drivers/sdcard_spi: Use uint8_t for byte values	2019-04-29 19:25:34 +02:00
sds011	drivers/sds011: Fix SAUL read error return	2019-01-31 15:35:19 +01:00
servo
sht1x	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
sht2x	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
sht3x	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
si70xx	drivers/si70xx: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
si114x
slipdev	slipdev: make rxmem buffer uint8_t	2019-06-05 21:24:38 +02:00
soft_spi	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
srf02
srf04	drivers: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
srf08
stm32_eth	stm32_eth: Code cleanup and some fixes	2019-07-04 15:27:50 +02:00
sx127x	drivers/sx127x: skip reset sequence if pin is undefined	2019-10-09 15:07:23 +02:00
tcs37727	drivers/tcs37727: do normal assignment instead of memcpy	2019-01-10 19:43:44 +01:00
tja1042
tmp00x	driver/tmp00x: Change tmp006 to tmp00x and add tmp007	2019-08-23 12:11:16 +02:00
tps6274x	drivers: Initial support for TPS6274x converter	2019-01-10 00:00:02 +01:00
tsl2561	drivers/tsl2561: add missing acquire∕release functions	2018-09-14 14:10:08 +02:00
tsl4531x	sys/auto_init: Changes to support SAUL	2018-10-23 17:26:28 +02:00
uart_half_duplex
vcnl40x0	drivers/vcnl40x0: initial implementation	2018-10-15 11:44:10 +02:00
veml6070
w5100	Merge pull request #10412 from maribu/w5100	2019-02-05 16:30:42 +01:00
xbee	gnrc: use gnrc_netif_default_init() for all implementations	2019-11-07 11:00:36 +01:00
doc.txt	drivers: Initial support for TPS6274x converter	2019-01-10 00:00:02 +01:00
Makefile
Makefile.dep	drivers/ina3221: INA3221 driver implementation	2019-11-05 12:29:42 +01:00
Makefile.include	drivers/ina3221: INA3221 driver implementation	2019-11-05 12:29:42 +01:00