Marian Buschsieweke 3e1dcf31cb tools/openocd: Allow specifying a custom halt command ... Typically, OpenOCD is already performing a reset on connect. A `reset halt` to bring the target to a `halt` state for flashing will result in the device going through a second reset cycle. This can be problematic with some device, such as the CC26xx MCUs. For these devices, an `OPENOCD_CMD_RESET_HALT := -c 'halt'` will avoid the second reset that is causing the issues.		2023-01-10 21:59:56 +01:00
..
adapters	tools/openocd: add stlink-dap adapter	2020-11-13 10:43:08 +01:00
openocd.sh	tools/openocd: Allow specifying a custom halt command	2023-01-10 21:59:56 +01:00