mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
71 lines
2.1 KiB
Markdown
71 lines
2.1 KiB
Markdown
## OpenThread on RIOT
|
|
|
|
This example demonstrates how to use the [OpenThread](https://github.com/openthread/openthread)
|
|
open source implementation of [Thread](https://threadgroup.org/) on RIOT.
|
|
|
|
The [Command Line Interface](https://github.com/openthread/openthread/blob/master/examples/apps/cli/README.md) of
|
|
OpenThread was ported. Please check the
|
|
[full documentation](https://github.com/openthread/openthread/blob/master/src/cli/README.md)
|
|
of the CLI for usage information.
|
|
|
|
You can either build a FTD or MTD firmware:
|
|
- MTD: A Minimal Thread Device does not have router functionality compiled in.
|
|
An MTD may or may not be sleepy.
|
|
- FTD: A Full Thread Device has router functionality compiled in.
|
|
|
|
## Quick usage
|
|
|
|
With RIOT port, a node is auto-setup and ready to communicate with
|
|
this configuration:
|
|
```
|
|
OPENTHREAD_PANID=0xbeef
|
|
OPENTHREAD_CHANNEL=26
|
|
```
|
|
|
|
You can pass the panid/channel independently when building the firmware:
|
|
```
|
|
make BOARD=<target> OPENTHREAD_PANID=0xaaaa OPENTHREAD_TYPE=ftd flash term
|
|
```
|
|
```
|
|
make BOARD=<target> OPENTHREAD_CHANNEL=20 OPENTHREAD_TYPE=ftd flash term
|
|
```
|
|
|
|
To try OpenThread in RIOT, you can do the following:
|
|
|
|
1. Flash nodes with MTD or FTD functionality:
|
|
```
|
|
make BOARD=<target> clean all flash OPENTHREAD_TYPE=mtd
|
|
```
|
|
```
|
|
make BOARD=<target> clean all flash OPENTHREAD_TYPE=ftd
|
|
```
|
|
|
|
2. Check the state of the node with `state`. In the beginning, it should be
|
|
`detached`, but after some seconds it should become `leader`
|
|
|
|
3. Start another node and check that it becomes `router`. There is only one
|
|
leader in a Thread network.
|
|
|
|
4. Get the mesh IP address of a node with `ipaddr`.
|
|
```
|
|
ipaddr
|
|
fdde:ad00:beef::ff:fe00:8000
|
|
fe80::ff:fe00:8000
|
|
fdde:ad00:beef:0:946a:c722:a5d9:8481
|
|
fe80::3984:f4eb:d182:5dae
|
|
```
|
|
5. Ping from another node with
|
|
```
|
|
ping fdde:ad00:beef:0:946a:c722:a5d9:848
|
|
```
|
|
|
|
6. You can try IEEE802.15.4 scan with `scan` command
|
|
|
|
7. You can also check other commands with `help`
|
|
|
|
|
|
## OpenThread port on RIOT status
|
|
|
|
OpenThread port on RIOT is stable. In case of any bug, please report via
|
|
[GitHub issue](https://github.com/RIOT-OS/RIOT/issues/new?template=bug_report.md&title=Bug).
|