mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
23 lines
1.1 KiB
Markdown
23 lines
1.1 KiB
Markdown
This is basically the same tests as for the normal shell, but here we are
|
|
testing via blueooth instead of UART. You have to set up a virtual serial port
|
|
manually.
|
|
|
|
For instructions on how to open a virtual serial port to your bluetooth device
|
|
see `sys/stdio_nimble/README`.
|
|
|
|
**Note:** `make term` and `make test-with-config` will open two different types of terminals.
|
|
- When calling `make term` then a terminal will communicate with the board
|
|
via UART. Due to the nature of `stdio_nimble` the board won't respond to input
|
|
coming from here)
|
|
- When calling `make test-with-config` then picocom will communicate with the board via the
|
|
given virtual serial port
|
|
|
|
So a procedure to run this test could be:
|
|
0. Make sure that the current test application instance is fresh and no test was
|
|
run on it before. Otherwise your test might fail, because the test case
|
|
`check_control_d` only works once per run.
|
|
1. Execute `make flash term`
|
|
2. Open a virtual serial port with `ble-serial` and note the virtual serial port
|
|
that was created (search for `Slave created on /tmp/dev_riot_ble -> /dev/pts/25`)
|
|
3. Execute `PORT=/dev/pts/25 make test-with-config`
|