mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
55 lines
1.9 KiB
Plaintext
55 lines
1.9 KiB
Plaintext
/**
|
|
@defgroup boards_stm32f030f4-demo STM32F030F4 Demo Board
|
|
@ingroup boards
|
|
@brief Support for the STM32F030F4 Demo Board
|
|
|
|
## Overview
|
|
|
|
The STM32F030F4 Demo Board is a very cheap breakout board for the STM32F030F4 MCU.
|
|
|
|
## Hardware
|
|
|
|
|
|
|
|
### MCU
|
|
| MCU | STM32F030R4 |
|
|
|:---------- |:--------------------- |
|
|
| Family | ARM Cortex-M0 |
|
|
| Vendor | ST Microelectronics |
|
|
| RAM | 4Kb |
|
|
| Flash | 16Kb |
|
|
| Frequency | up to 48MHz |
|
|
| FPU | no |
|
|
| Timers | 8 (2x watchdog, 1 SysTick, 5x 16-bit) |
|
|
| ADCs | 1x 12-bit |
|
|
| UARTs | 6 |
|
|
| SPIs | 1 |
|
|
| I2Cs | 1 |
|
|
| RTC | 1 |
|
|
| Vcc | 2.0V - 3.6V |
|
|
| Datasheet | [Datasheet](https://www.st.com/en/microcontrollers-microprocessors/stm32f030f4.html) |
|
|
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/datasheet/stm32f030f4.pdf) |
|
|
| Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) |
|
|
|
|
## Flashing the device
|
|
The STM32F030F4 Demo Board board does not include a programmer.
|
|
You have to connect a separate ST-Link programmer to the (SW)DIO, (SW)CLK, GND and
|
|
NRST pins on the board.
|
|
|
|
If you want a serial terminal, you have to connect a separate USB-Serial adapter to
|
|
the RX and TX pins on the board.
|
|
|
|
The easiest way to program the board is to use OpenOCD. Once you have installed
|
|
OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for
|
|
installation instructions), you can flash the board simply by typing
|
|
|
|
```
|
|
make BOARD=stm32f030f4-demo flash
|
|
```
|
|
and debug via GDB by simply typing
|
|
```
|
|
make BOARD=stm32f030f4-demo debug
|
|
```
|
|
|
|
*/
|