mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
22 lines
1.1 KiB
Markdown
22 lines
1.1 KiB
Markdown
# Test for `periph/gpio_ll`
|
|
|
|
This application will use two output and two input GPIOs, which have to be
|
|
connected via a jumper wire. The test will change the value of the two pins
|
|
output pins and use the input pins to read the value back in. If the value read
|
|
doesn't match the expected result, the test aborts and fails.
|
|
|
|
If IRQ support is provided, the test will additionally walk through every IRQ
|
|
configuration for the first GPIO pin given and iterate over any trigger
|
|
condition possible. It will check that edge trigger and (if supported) level
|
|
trigger IRQs trigger exactly on the configured triggers.
|
|
|
|
## Configuration
|
|
|
|
Configure in the `Makefile` or set via environment variables the number of
|
|
the output GPIO port to use via the `PORT_OUT` variable. The `PIN_OUT_0` and
|
|
`PIN_OUT_1` variables select the pins to use within that GPIO port. The input
|
|
GPIO port is set via `PORT_IN`. Both `PORT_IN == PORT_OUT` and
|
|
`PORT_IN != PORT_OUT` is valid. The input pin number within `PORT_IN` are set
|
|
via `PIN_IN_0` and `PIN_IN_1`. `PIN_IN_0` has to be wired to `PIN_OUT_0`, and
|
|
`PIN_IN_1` to `PIN_OUT_1`.
|