mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2025-01-16 14:32:45 +01:00
79 lines
2.7 KiB
Markdown
79 lines
2.7 KiB
Markdown
# Auto-configuration for nested subnets on a (simple) tree topology
|
|
|
|
This example demonstrates IPv6 subnet auto-configuration for networks on a
|
|
tree topology.
|
|
|
|
This allows to connect multiple links with individual subnets and route
|
|
between them.
|
|
Each link can have an arbitrary number of hosts, but there can be only
|
|
a single router on each link.
|
|
Routers can have multiple interfaces to connect different downlinks.
|
|
|
|
|
|
|
|
## Setup on native
|
|
|
|
To simulate such a network on `native` a `setup_taps.sh` script is provided that
|
|
will create TAP interfaces and bridges.
|
|
Each bridge will be it's own subnet and `native` instances will act as routers
|
|
to route between them.
|
|
The setup script will also start `radvd` to advertise a large prefix that allows
|
|
for sub-division by RIOT.
|
|
|
|
The interfaces that should be created are specified in the `tapology.txt` file.
|
|
|
|
Each router will have (at least) two interfaces that should be on different
|
|
bridges.
|
|
|
|
To start the first router, run
|
|
|
|
make term PORT="tap_a0 tap_b1"
|
|
|
|
This will route between the `tap_a0` interface on `br0` and the `tap_b1`
|
|
interface on `br1`.
|
|
Start more `native` instances to simulate a cascading tree network:
|
|
|
|
make term PORT="tap_b0 tap_c1"
|
|
make term PORT="tap_c0 tap_d1"
|
|
…
|
|
|
|
It is also possible to connect non-routing leaf nodes with a single interface:
|
|
|
|
make flash term LEAF=1 PORT=tap_b2
|
|
|
|
|
|
## Setup on hardware
|
|
|
|
On physical hardware the setup will be the same.
|
|
Routing nodes need at least two interfaces between which they can route.
|
|
For a simple setup, you can use `ethos` or `slipdev` to turn any UART into
|
|
a network interface. (If you need to use DHCPv6 IA_PD for obtaining a prefix,
|
|
use `slipdev_l2addr` instead of plain `slipdev`)
|
|
|
|
### Obtaining the prefix
|
|
|
|
#### Via router advertisements
|
|
|
|
Usually routers are configured to advertise a /64 prefix that can not be divided
|
|
further when using SLAAC.
|
|
If you can configure your router to advertise a larger prefix instead, this
|
|
will be the easiest solution.
|
|
|
|
#### Via DHCPv6
|
|
|
|
If you can't change the configuration of your router, but your router supports
|
|
DHCPv6 IA_PD, you can use this to request a larger prefix.
|
|
|
|
This requires a gateway node that uses the `gnrc_dhcpv6_client_simple_pd`
|
|
module *instead* of `gnrc_ipv6_auto_subnets`.
|
|
|
|
Make sure to set the `CONFIG_GNRC_DHCPV6_CLIENT_6LBR_UPSTREAM` option to the
|
|
ID of the upstream interface on the gateway device, e.g.
|
|
|
|
CFLAGS += -DCONFIG_GNRC_DHCPV6_CLIENT_6LBR_UPSTREAM=6
|
|
|
|
As with GNRC the interface ID is based on the PID of the interface thread, this can
|
|
change if you add modules / threads and is a common source of errors.
|
|
If the configuration is set wrong, you will not get a prefix for the downstream
|
|
interface(s).
|