mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
28 lines
1.3 KiB
Markdown
28 lines
1.3 KiB
Markdown
# About
|
|
|
|
This is a test application for the HD44780 LCD driver. This display comes with
|
|
many Arduino starter kits under the name of LCM1602C, and typically has 16x2
|
|
columns and rows.
|
|
|
|
# Details
|
|
|
|
This test application will initialize the HD44780 driver with the configuration
|
|
as specified in the default `hd44780_params.h` file. To connect the display with
|
|
your board use the following minimal pinout for the LCD (i.e., Arduino here):
|
|
|
|
- Pin 1 is connected directly to GND.
|
|
- Pin 2 is connected directly to VCC +5V.
|
|
- Pin 3 is used to set LCD contrast, for max use +5V or a 10k potentiometer.
|
|
- Pin 4 (RS or "register select") is connected to pin 2 on the Arduino
|
|
- Pin 5 (RW or "read/write") is connected directly to GND, i.e., unused.
|
|
Also note: if you connect RW to your board that the LCD is driven by 5V, while
|
|
many boards internally run at 3.3V - so this could fry the board :/
|
|
- Pin 6 (EN or "enable") is connected to pin 3 on the Arduino.
|
|
- Pins 7 - 10: Not connected.
|
|
- Pin 11 on the LCD is connected to pin 4 on the Arduino.
|
|
- Pin 12 on the LCD is connected to pin 5 on the Arduino.
|
|
- Pin 13 on the LCD is connected to pin 6 on the Arduino.
|
|
- Pin 14 on the LCD is connected to pin 7 on the Arduino.
|
|
- Pin 15 is connected to one end of a 1k resistor, and its other end to VCC +5V.
|
|
- Pin 16 is connected directly to GND.
|