`examples/gnrc_networking_mac/udp.c` is a duplicate of the file in
`gnrc_networking`. However, while the latter moved along in code style
and static analysis, the first was left a bit at the wayside. This
change resyncs the two files.
The default channel configuration is managed within the Makefiles of many
examples and tests. This commit moves the default channel logic to
`makefiles/default-channel.ink.mk` to ease maintenance. All Makefiles that
previously managed the default channel configuration themself have been
updated to include that file.
The default channel configuration of the cc110x has been added
The warning issued when the PID and VID are set to the default values should
not be printed on `make clean` and other targets, only with `make all` and it
should be a proper target.
To do: replace shell echos with proper $(warning ..) calls.
The blacklisted boards use NimBLE as default network stack. But
NimBLE and ndn-riot do not build simultaneously, as they use
clashing crpyto libraries (uECC vs tinycrypt).
There is no reason why this package would need tlsf. Using tlsf as
system malloc is not known to work in all platforms.
With this patch CCN-Lite will use the default malloc provided by the
target's C library.
- Removed cc110x driver
- Updated all makefiles
- Kept both board specific configurations and support for it in RIOT's
upper layers, so re-implementations don't need to start from zero
The mips-malta board is a maintainance burden, has no working UART input
and is unobtainable and thus must be removed.
1. Unobtainable board
=====================
The mips-malta board is not an off-the-shelf part. A quick web
search only show the MIPS website where one is told to "contact sales".
I could find it on ebay, used, at €155 and from single seller.
Not having access to the board means:
a. We cannot maintain it. In fact it could be broken right now.
b. Potential RIOT uses have not access to the board either. In other
words, it is pointless to run on hardware nobody has.
2. No working UART input
========================
Not all applications need UART input, but that is no excuse for not supporting
it:
a. Makes development & debugging way harder.
b. It is impossible to run interactive tests.
b.1. Constrains the rest of the platforms by providing an incentive to not
make tests interactive.
c. The lack of UART is a witness to the poor quality of the port.
I want to stress point (c). If something as basic as a serial port cannot work,
how can we expect more complex fucntionality to work. The answer is impossible
to know, because of point (1).
3. Maintainance burden
======================
The RIOT project has limited time and human resources which can be better spent.
a. Compiling for mips-malta wastes CPU time.
b. Blacklisting the board in the test wastes contributor's time.
c. Adapting the board's makefile during build system rework takes time and makes
the reworks harder.
c.1. Add to that that the changes are most of the time not even tested on the board
because of (1). Look at the github issues/PRs and you will see it.
d. Developers usually stick to the lowest common denominator. Issue (2) sets this
denominator unacceptably low.
MIPS platform in general
========================
In commits I will address general issues in the MIPS platform and why it should all
be removed.
cpu/stm32_common: cleanup periph eth
boards/nucleo-f767zi: cleanup dependencies
boards/nucleo-f767zi: fix dma configuration attribute for eth
examples/default: add nucleo-767zi in boards with netif
drivers/stm_32_eth: Add header guard for eth_config
Co-authored-By: Robin <robin@chilio.net>
