1011af27a1
Merge pull request #16566 from aabadie/pr/pkg/semtech-loramac-no-force-periph_rtt
...
pkg/semtech-loramac: don't force ztimer rtt backend
2021-06-17 18:09:31 +02:00
Martine Lenders
7cad799afe
Merge pull request #15468 from jia200x/pr/rh/rev.13.11
...
ieee802154/hal: adapt frame filter and source address matching changes
2021-06-17 16:18:57 +02:00
Francisco
a012a0849f
Merge pull request #15317 from aabadie/pr/sys/arduino_ztimer
...
sys/arduino: replace xtimer by ztimer as high-level background timer
2021-06-17 15:56:04 +02:00
4e909b52f0
tests/pkg_semtech-loramac: blacklist atxmega-a1u-xpro board
2021-06-17 15:01:21 +02:00
Martine Lenders
4d6d46534d
Merge pull request #16564 from fjmolinas/pr_fix_turo_congure
...
tests/congure-turo: reset before opening terminal
2021-06-17 13:14:05 +02:00
Francisco Molina
94da3ed9a7
tests/congure: reset before opening terminal
...
Some BOARD terminals are slow to start so if the BOARD is reset after
opening the terminal this can lead to off-by-one error when parsing
the output.
So instead do as testrunner and reset before opening the terminal.
Note that no interactive_sync is needed since a similar mechanism
happens in ShellInteraction.
2021-06-17 11:05:07 +02:00
Francisco Molina
a0714298a3
tests/turo: reset before opening terminal
...
Some BOARD terminals are slow to start so if the BOARD is reset after
opening the terminal this can lead to off-by-one error when parsing
the output.
So instead do as testrunner and reset before opening the terminal.
Note that no interactive_sync is needed since a similar mechanism
happens in ShellInteraction.
2021-06-17 11:05:00 +02:00
e30a107329
tests/sys_arduino: skip atmega328p based boards from ci
2021-06-17 10:29:27 +02:00
Jose Alamos
7d14fb3571
ieee802154/hal: remove set_rx_mode
2021-06-17 10:07:43 +02:00
Jose Alamos
6d64b537ef
ieee802154/hal: remove set_hw_addr_filter
2021-06-17 10:07:43 +02:00
Marian Buschsieweke
258d384fec
tests/ztimer_periodic: iterate over clocks
...
Instead of only testing for `ZTIMER_MSEC`, iterate over a list of
clocks and run the test for each. The reasoning is that this test
does not only test `ztimer_periodic`, but also that the used clock
backend operates correctly in a typical use case.
2021-06-16 13:11:13 +02:00
Francisco Molina
c80390f28b
ztimer: pull ztimer_periph_rtt for ZTIMER_MSEC if available
2021-06-16 11:18:25 +02:00
Kevin "Tristate Tom" Weiss
0c06948373
Merge pull request #16552 from MrKevinWeiss/pr/fix/kconfigqdsa
...
pkg/qdsa: force qdsa to lowercase
2021-06-15 15:21:26 +02:00
Francisco
d7b3328601
Merge pull request #16098 from kfessel/p-remove-lifo
...
core/lifo: Remove lifo [after 2021.04]
2021-06-15 13:55:30 +02:00
MrKevinWeiss
0345f97962
pkg/qdsa: force qdsa to lowercase
2021-06-15 12:06:10 +02:00
beb171de40
Merge pull request #16546 from fjmolinas/pr_kinetis_lptmr_rtt
...
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 11:02:16 +02:00
Francisco Molina
d9ee424b7c
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 08:29:09 +02:00
Hauke Petersen
ef8753a37f
tests/trickle: use ztimer instead of xtimer
2021-06-14 09:04:25 +02:00
Hauke Petersen
830baa97c9
tests/nimble_l2cap: adapt buffer sizes
2021-06-10 10:02:10 +02:00
90dd3deb21
Merge pull request #16295 from fjmolinas/pr_edhoc_c
...
pkg/edhoc-c: initial commit
2021-06-08 17:23:52 +02:00
Francisco Molina
fda3cbc60a
tests/pkg_edhoc: initial import
2021-06-08 14:34:33 +02:00
cfb10db9b7
Merge pull request #16507 from fjmolinas/pr_event_timeout_periodic
...
sys/event: add periodic timeout event
2021-06-08 13:07:40 +02:00
30c0ba65d5
Merge pull request #15559 from fjmolinas/pr_riotboot_flashwrite_test
...
tests/riotboot/flashwrite: add automatic test
2021-06-08 11:15:19 +02:00
benpicco
88da1421be
Merge pull request #16469 from Franz2000/support-seeeduino-XIAO-board
...
boards: Adding board support for the Seeeduino XIAO
2021-06-08 10:35:26 +02:00
Francisco Molina
efedc66cae
tests/riotboot/flashwrite: add automatic test
2021-06-07 08:55:34 +02:00
Francisco Molina
0a3c9b694b
tests/msg_queue_print: fix test on hw
2021-06-04 13:37:21 +02:00
Francisco Molina
c505bb11d2
tests/event_ztimer: initial import
2021-06-03 17:53:53 +02:00
benpicco
41bbafdfe4
Merge pull request #16328 from benpicco/driver/lis2dh12-cleanup
...
drivers/lis2dh12: clean up API
2021-06-03 15:33:04 +02:00
Benjamin Valentin
a338b65d29
tests/driver_lis2dh12: add support for temperature sensor
2021-06-03 12:59:50 +02:00
Benjamin Valentin
0ab186ad50
tests/driver_lis2dh12: adapt to API changes
2021-06-03 12:59:50 +02:00
MaestroOnICe
dc8f7912e9
boards: add Seeeduino XIAO
2021-06-02 14:23:55 +02:00
Martine Lenders
e142001221
Merge pull request #15168 from JulianHolzwarth/pr/software/test/IPC/change
...
core/msg.c: fixed msg_queue_print()
2021-06-02 12:18:04 +02:00
JulianHolzwarth
08382fed33
tests/msg_queue_print/: new test for msg_queue_print
2021-06-02 01:28:28 +02:00
fde0bb7819
Merge pull request #16505 from fjmolinas/pr_event_timeout_ztimer
...
sys/event/timeout: add option to use ztimer as backend
2021-06-01 12:19:39 +02:00
12a03c60e5
tests: examples: use IOTLAB_NODE=auto instead of auto-ssh
2021-05-28 17:23:11 +02:00
Francisco Molina
4f34e50130
sys/event/timeout: add option to use ztimer as backend
2021-05-27 22:34:01 +02:00
08049fbb79
tests/pkg_qr-code-generator: remove dependency to auto_init_screen
2021-05-25 14:22:25 +02:00
7d5051f2ec
tests/{disp,touch}_dev: remove dependency to auto_init_screen
2021-05-25 14:21:58 +02:00
79dd9a4e3a
tests/pkg_qr-code-generator: add disp-dev for esp32-wrover-kit
2021-05-22 09:30:44 +02:00
876004442a
Merge pull request #16486 from aabadie/pr/pkg/lvgl_remove_internal_thread
...
pkg/lvgl: remove internal thread
2021-05-21 16:50:49 +02:00
Francisco
9b449fba98
Merge pull request #16185 from aabadie/pr/drivers/sx127x_uncrustify
...
drivers/sx127x: uncrustify code
2021-05-21 11:45:25 +02:00
c09c7d549d
tests/pkg_lvgl: remove manual call to sysmon_task
2021-05-20 20:56:17 +02:00
ef6d377197
tests/pkg_lvgl*: adapt to new behavior
2021-05-20 13:06:49 +02:00
9c749bc214
Merge pull request #16480 from aabadie/pr/tests/touch_dev_enh
...
tests/touch_dev: improve genericity by using auto_init_screen module
2021-05-19 12:24:28 +02:00
e7983908f9
tests/touch_dev: use auto_init_screen
2021-05-19 11:30:32 +02:00
4b2f9af90f
tests/disp_dev: improve screen cleanup speed
2021-05-19 10:01:03 +02:00
12a0adc57c
tests/disp_dev: use auto_init_screen
...
This removes the explicit dependency to ili9341 driver
2021-05-19 09:59:23 +02:00
47bf32ed02
tests/driver_sx127x: uncrustify code
2021-05-18 11:00:44 +02:00
Gerson Fernando Budke
8a2c88a808
boards/atxmega-a3bu-xplained: Add spi configuration
...
Add J1 header spi configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-05-14 23:26:08 -03:00
Gerson Fernando Budke
8cc9c42d1d
boards/atxmega-a1u-xpro: Add spi configuration
...
Add EXT-1 spi bus configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-05-14 23:26:08 -03:00
