9af6c69a93
usbdev: Introduce a common API for USB peripherals
...
This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
2019-03-14 21:44:56 +01:00
Yegor Yefremov
b8ff48cce4
periph/uart: improve documentation
...
Change description to reflect the configurability of the serial
interface.
Also, fix the uart_mode parameter description as the UART will be
configured and not initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-11 09:35:23 +01:00
Yegor Yefremov
ddf19783d7
periph/uart: add support for enhanced serial settings
...
As suggested in PR#5899 add a routine uart_mode() that will
setup data bits, stop bits and parity at runtime.
uart.h provides a set of enums defining these settings and each
platform will override them to specify values corresponding to
its configuration registers.
The idea behind the enums is to specify default settings i.e. 8N1
through the 0 value item. Invoking uart_mode(uart, 0, 0, 0) will
setup 8N1 mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:11 +01:00
MrKevinWeiss
0ad94e1b4b
drivers/include/i2c: Fix API documentation
...
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
2018-12-10 09:56:40 +01:00
Hauke Petersen
39f0e4d5d3
periph/uart: fix line length in doc header
2018-12-06 10:08:56 +01:00
1008ab4fdf
drivers/periph_eeprom: add eeprom_set function
2018-12-04 11:24:57 +01:00
50f19d1d1f
drivers/periph_eeprom: add clear and erase functions
2018-12-04 11:24:57 +01:00
Joakim Nohlgård
a867aeaba2
periph/i2c: Add precondition on i2c_acquire for i2c bus access
2018-11-28 08:43:01 +01:00
e9a6ebc409
cpu: drivers/eeprom: refactor periph_eeprom implementation
2018-10-16 10:39:10 +02:00
Martine Lenders
0598d5bcf1
periph_gpio: comment IRQ #endif correctly
2018-10-09 15:11:45 +02:00
Martine Lenders
a95957e513
Merge pull request #9992 from haukepetersen/fix_periph_gpiofeaturesscope
...
periph/gpio: fix scope of GPIO_IRQ submodule
2018-10-09 15:10:39 +02:00
Hauke Petersen
bd66184eb2
periph/gpio: re-add irq functions to doxygen
2018-09-21 08:31:09 +02:00
Hauke Petersen
abc11c8e23
periph/gpio: fix scope of GPIO_IRQ submodule
...
Move the gpio_irq_enable() and gpio_irq_disable() functions
into the scope of the PERIPH_GPIO_IRQ submodule.
2018-09-21 08:30:29 +02:00
smlng
a9e848f648
periph/rtt: add missing std header
...
The periph/rtt.h uses `uintX_t` typedefs but misses the required
standard header file, namely `stdint.h`, which is added here.
2018-09-07 14:54:23 +02:00
Joakim Nohlgård
ace717ee27
drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ
2018-08-29 08:53:20 +02:00
Francisco Acosta
71d3c14354
drivers/periph_common/eeprom: remove the now unnecessary cpu.h include
2018-08-15 15:27:03 +02:00
smlng
2db2ce2dc7
doc: rename sections in i2c.h
2018-07-25 12:01:40 +02:00
dylad
ef8ed2620c
periph_common/i2c: introduce new ret codes scheme
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
872251d011
periph/i2c: Add 10 bit addressing magic number definition
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
f2a2427fcd
periph/i2c: Editorial changes to i2c.h
2018-07-25 12:01:34 +02:00
01509b294f
drivers/periph_i2c: i2c_init should return void
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
1dfc5f8f52
periph/i2c: Editorial doc changes
2018-07-25 12:01:34 +02:00
6f25886d77
drivers/periph/i2c: fixes issues in API
...
- non matching doxygen input parameter to i2c_write_reg
- non/matching missing function parameter
- invalid return type to i2c_release
2018-07-25 12:01:34 +02:00
dylad
e11a37df03
drivers/i2c: modify I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Hauke Petersen
45ab3ea89d
drivers/periph: introduced new I2C interface
2018-07-25 12:01:34 +02:00
Vincent Dupont
071614bf04
Merge pull request #8543 from OTAkeys/pr/rtt_clean_up
...
periph_rtt: remove RTT_NUMOF guard and init from periph_common
2018-07-10 15:00:53 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
Vincent Dupont
1f409d09dd
drivers/flashpage: use const ptrs for write/verify
2018-03-13 21:51:37 +01:00
Yannick Gicquel
34f2b3e6f9
drivers/qdec: doxygen rendering fixes
...
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2018-03-01 20:53:34 +01:00
Gilles DOFFE
58b7ed3fa9
drivers: add periph_qdec
...
QDEC interface enables access to CPU peripherals acquiring quadrature
signals.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 21:40:15 +01:00
Vincent Dupont
6840c15db0
periph/rtt: remove RTT_NUMOF guard from header
2018-02-09 15:51:06 +01:00
kYc0o
6dffb71b09
drivers/include/periph/flashpage.h: add flashpage_write_raw
2017-11-30 17:25:35 +01:00
Bas Stottelaar
31c7e9e4c2
periph: i2c: include note on address alignment.
2017-10-31 20:50:42 +01:00
Hauke Petersen
5920d99752
pm: fix weak-based default implementations
...
Instead of using `weak` function definitions, this PR handles
default implementations using `PROVIDES_x` defines, allowing
for cpus/pm realted modules to use their own implementations.
2017-10-16 14:27:35 +02:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
Hauke Petersen
7204ec3166
periph/rtc: removed RTC_NUMOF guards from header
2017-08-23 15:39:16 +02:00
Sebastian Meiling
95b31660b6
Merge pull request #7173 from haukepetersen/opt_gpiodoc
...
drivers/gpio: improved doc for gpio_init()
2017-07-14 14:17:39 +02:00
Hauke Petersen
a2bc258af0
drivers/dac: clarified doc and named return values
...
- added more comprehensive doc to dac_init and dac_set
- named return values for dac_init
- use named return values in existing implementations
2017-06-27 12:52:12 +02:00
Hauke Petersen
3ec75635ba
drivers/gpio: improved doc for gpio_init()
2017-06-26 13:39:28 +02:00
smlng
15f8703f01
doc: use markdown sections, adapt pwm.h
2017-06-06 16:07:51 +02:00
smlng
756e3d95fb
doc: make detailed description of flashpage interface more visibile
2017-06-06 16:05:52 +02:00
smlng
236c6cb013
doc: enhance doxygen doc of PM module
2017-06-06 16:05:52 +02:00
smlng
ab6cb269ed
doc: fix UART doxygen docu
...
- move detailed description to be visible on respective module page
- see and compare other periph interfaces, i.e., GPIO, PWM ...
2017-06-06 16:05:52 +02:00
smlng
f5cd3a4496
doc: reorganize and enhance docu on common I2C periph interface
2017-06-06 16:05:47 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Thomas Eichinger
798557c32c
doc: drivers: fix doxygen warnings
2017-03-10 14:56:48 +01:00
79b2fd89bb
Merge pull request #6568 from haukepetersen/opt_periph_uarttxonly
...
periph/uart: enable to run UART in TX only mode
2017-02-24 13:01:38 +01:00
Hauke Petersen
fc6b7f0575
Merge pull request #6564 from haukepetersen/opt_periph_pwmpower
...
periph/pwm: remove pwm_(start|stop) + doc
2017-02-23 10:58:44 +01:00
Hauke Petersen
419e043c1a
periph/dac: removed DAC_NUMOF check
2017-02-22 10:30:16 +01:00
Hauke Petersen
021471e691
periph/uart: removed UART_NUMOF check
2017-02-15 09:45:06 +01:00
