Martine Lenders
f71af3b0ec
Merge pull request #10509 from miri64/esp_now/fix/devtype
...
esp_now: use NETDEV_TYPE_ESP_NOW as device type
2018-11-29 15:25:21 +01:00
Kevin "Bear Puncher" Weiss
46bdbb6535
Merge pull request #10484 from smlng/pr/atmega/timer
...
atmega: fix periph timer configuration
2018-11-29 14:28:23 +01:00
Martine Lenders
03b91cbcb8
esp_now: use NETDEV_TYPE_ESP_NOW as device type
2018-11-29 13:35:20 +01:00
765de5a78a
Merge pull request #10486 from gebart/kinetis/fopt
...
kinetis: Allow FOPT settings other than 0xff
2018-11-29 11:23:24 +01:00
smlng
262a04c9cf
atmega: fix periph timer configuration
...
- correct number of timers for atmega328p from 2 to 1
- correct number of timer channels for atmega328p from 3 to 2
- adapt atmega periph timer implementation accordingly
2018-11-29 09:30:44 +01:00
Gunar Schorcht
061e32bad0
Merge pull request #10460 from gschorcht/esp32_fix_baslibs
...
cpu/esp32: fixes LINKFLAGS in Makfile.include
2018-11-28 15:49:25 +01:00
Sebastian Meiling
4eaf1d8135
Merge pull request #10384 from bergzand/pr/netdev/ref_nid
...
netdev_ieee802154/radios: refactor PAN ID reset to generic ieee802154 reset
2018-11-28 12:15:45 +01:00
7ed3f80989
zep: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
da0866a6a0
cc2538_rf: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
Gunar Schorcht
0c289a8f31
cpu/esp32: fixes LINKFLAGS in Makefile.include
...
removes the duplicate entry of -lg in LINKFLAGS
2018-11-28 10:44:54 +01:00
Joakim Nohlgård
870385530d
kinetis: Allow override of FOPT setting in fcfield.c
2018-11-28 00:21:35 +01:00
Joakim Nohlgård
d63672798e
kinetis: Allow FOPT settings other than 0xff
...
These bits configure some early boot options and may be necessary to
use on certain boards to ensure a robust boot sequence.
2018-11-27 16:00:42 +01:00
Hauke Petersen
ac50b4a052
Merge pull request #10243 from aabadie/pr/board/common_nrf51
...
boards/common: add common place for nrf51 based boards
2018-11-26 10:07:31 +01:00
Martine Lenders
7a8469f1aa
Merge pull request #10426 from bergzand/pr/cc2538_rf/undedup_channel
...
cc2538_rf: Don't use netdev_ieee802154_t for channel
2018-11-25 13:26:57 +01:00
897044623a
cc2538_rf: Don't propagate channel to 802154 layer
2018-11-25 10:38:13 +01:00
40b4af1905
cc2538_rf: Add NETOPT_CHANNEL to getters
2018-11-25 10:38:08 +01:00
Gunar Schorcht
9bba4b9aa5
cpu/esp32: fixes LINKFLAGS in Makfile.include
...
This commit adds the ESP32 vendor libraries for WLAN to the BASELIBS variable. This avoids having to define an additional archive group in the LINKGFLAGS variable which contains these vendor libraries and again RIOT module archive files with the symbols that are refered by these vendor libraries.
2018-11-23 18:04:19 +01:00
Martine Lenders
3771e6a2c4
Merge pull request #10425 from bergzand/pr/cc2538_rf/undedup_address
...
cc2538_rf: Don't use netdev_ieee802154_t for link layer address
2018-11-22 12:45:52 +01:00
Gunar Schorcht
54492ef4d9
Merge pull request #10451 from leandrolanzieri/pr/esp8266/i2c_buses_array
...
cpu/esp8266: Fix i2c buses array #ifdef
2018-11-22 10:21:11 +01:00
MichelRottleuthner
1be4d15a4e
Merge pull request #10390 from PeterKietzmann/pr_mega2560_puf_seed
...
cpu/atmega_common: add mega2560 puf_sram feature
2018-11-22 09:57:19 +01:00
Leandro Lanzieri
566ef9f117
cpu/esp8266: Fix i2c buses array definition
2018-11-22 08:09:35 +01:00
Juan I Carrano
68d68d18b4
Merge pull request #10362 from gschorcht/esp32_compile_fix
...
cpu/esp32: fixes compile problems
2018-11-21 14:18:15 +01:00
PeterKietzmann
8d11ca417f
cpu/atmega_common: add mega2560 puf_sram feature
2018-11-20 09:45:32 +01:00
MichelRottleuthner
e0e02c04c8
Merge pull request #10386 from PeterKietzmann/pr_puf_variables_move
...
sys/puf_sram: CPU specific variable allocation
2018-11-20 09:21:25 +01:00
PeterKietzmann
0be350e352
sys/puf_sram: CPU specific attributes for variables
2018-11-20 08:34:53 +01:00
Gunar Schorcht
2a7c33bdf6
cpu/esp32: fixes compile problems
2018-11-20 00:49:33 +01:00
08dd9a1df8
cc2538_rf: Don't propagate address to 802154 layer
2018-11-17 22:38:18 +01:00
ffe6aed83e
cc2538_rf: Add NETOPT_ADDRESS{,_LONG} to getters
2018-11-17 22:38:17 +01:00
Semjon Kerner
ee3ef1927d
cpu/nrf5x: fix event hang
2018-11-14 12:48:32 +01:00
Schorcht
16f0bf4fdc
cpu/esp32: fixes compile problems
2018-11-10 14:14:49 +01:00
f3fa8b5ecd
Merge pull request #8558 from gebart/pr/kinetis-gpio-interrupt
...
kinetis: Optimize GPIO interrupt handler
2018-11-08 22:27:38 +01:00
Joakim Nohlgård
8bb73f237d
kinetis: GPIO: avoid dup calls to cortexm_isr_end on KW41Z
...
Devices with combined IRQs would call the cortexm_isr_end handler twice
when it is part of the irq_handler routine.
2018-11-08 14:52:10 +01:00
Joakim Nohlgård
b9ceac5ccc
kinetis: Optimize GPIO IRQ handler
...
Measurements show that the time from pin edge until return from
interrupt is reduced from 22 us to 6.1 us for KW41Z running at
41.94 MHz. The measurements used a no-op GPIO callback for testing and
were measured using an external logic analyzer.
2018-11-08 14:52:10 +01:00
Semjon Kerner
1e9c0b8d21
cpu/nrf51: update vendor headers
2018-11-08 14:09:41 +01:00
Semjon Kerner
d8a30eeedf
cpu/nrf52: update vendor headers
2018-11-08 14:09:33 +01:00
José Alamos
296356fe4e
Merge pull request #10325 from gschorcht/esp32_doxygen_fix
...
cpu/esp32: doxygen fix for periph/gpio
2018-11-05 14:58:32 +01:00
Gunar Schorcht
100a4c666e
cpu/esp32: doxygen fix
...
Removes architecture specific includes from documentation of module Peripheral Driver Interface / GPIO.
2018-11-05 11:27:00 +01:00
Gunar Schorcht
ffd69868c6
cpu/esp8266: doxygen fix
...
Removes architecture specific includes from documentation of module Peripheral Driver Interface / GPIO.
2018-11-05 11:23:40 +01:00
Francisco Acosta
b2fc9b197e
cpu/atmega*: remove unnecessary code (already factored out)
...
cpu.c and startup.c were redundant in most platforms, except for
atmega256rfr2. The common code is now in cpu/atmega_common/cpu.c
and cpu/atmega_common/startup.c. cpu_conf.h is also removed as
it's now in cpu/atmega_common/include thus shared by all atmega
based platforms.
2018-11-02 16:23:48 +01:00
Francisco Acosta
4f28407af8
cpu/atmega_common: use the same cpu_conf for all atmega based boards
...
Removes redundancy of code since all the boards were defining
the same variables. Moreover, the stack sizes are unified per
architecture, as required.
2018-11-02 16:23:48 +01:00
Francisco Acosta
feac98cc97
cpu/atmega_common: add cpu.c and startup.c common code
...
Removes duplicated code for atmega platforms. They were all
basically the same, only with the exception of atmegarfr2,
for which there is an #if statement to use the code in the
same file.
2018-11-02 16:23:47 +01:00
Francisco Acosta
0d95cc877b
Merge pull request #10273 from snej/master
...
cpu/esp32: allow explicit ESP32 crystal freq configuration
2018-11-01 14:04:57 +01:00
Jens Alfke
ce1fe776cf
cpu/esp32: allow explicit ESP32 crystal freq configuration
...
Some ESP32 boards (like my SparkFun ESP32 Thing) have a main clock
crystal that runs at 26MHz, not 40MHz. RIOT appears to assume 40MHz.
The mismatch causes the UART to not sync properly, resulting in
garbage written to the terminal instead of log output.
I’ve added:
* A new board configuration constant ESP32_XTAL_FREQ that defaults
to 40, but can be overridden by a board def or at build time to
force a specific value (i.e. 26).
* Some code spliced into system_clk_init() to check this constant and
call rtc_clk_init() to set the correct frequency.
* A copy of the rtf_clk_init() function from the ESP-IDF sources.
Fixes #10272
2018-10-30 16:42:07 -07:00
c71c27cf5c
cpu/nrf51: add gpio to features provided
2018-10-27 09:47:42 +02:00
MrKevinWeiss
3e1fd9f494
cpu/stm32_common/i2c: Fix error handling in i2c_1.c
...
Errors flags could not clear making the i2c unusable after error.
This fix removes the error check in start so the error flags can clear and does proper checking for status bits before _bus_check.
2018-10-26 09:56:35 +02:00
Juan I Carrano
4d85bcf510
Merge pull request #10062 from cladmi/pr/make/cpu/fe310/features
...
cpu/fe310: rtc depend on the rtt feature and hifive1 update
2018-10-23 13:28:17 +02:00
Kevin "Bear Puncher" Weiss
cb09092c0b
Merge pull request #10125 from gschorcht/esp8266_cpu_freq
...
cpu/esp8266: cpu frequency settings feature added
2018-10-19 14:53:45 +02:00
Schorcht
0d796d6eec
cpu/esp8266: cpu frequency settings
2018-10-19 13:08:32 +02:00
Hauke Petersen
86b4a41466
Merge pull request #10158 from silkeh/fix-nrf5x-gpio
...
nrf5x_common: gpio: fix port 1 functionality
2018-10-17 17:17:46 +02:00
Kevin "Bear Puncher" Weiss
0628345364
Merge pull request #10093 from aabadie/pr/drivers/periph_eeprom_refactor
...
drivers/periph_eeprom: refactor implementation and test application
2018-10-16 16:30:40 +02:00
