The calculation of `_state_index` is broken for `port = 2`
_gpio_isr_map[n + (port<<1)];
Will not yield the right result. As a consequence, IRQs on Port 2
are not working.
The right thing here would be
_gpio_isr_map[n + (port ? 32 : 0)];
But we might just re-using the `_isr_map_entry()` function.
Also only iterate as many times as there are set interrupt bits.
The ARM CortexM vector table has some reserved fields which are used by
some manufacturers to store their custom image information. In
particular, NXP QN908X stores the checksum, Code Read Protection, image
type and boot block pointer in this region.
This patch allows the cpu and board modules to define the value of these
fields at build time by defining a macro.
This fixes `xtimer` to use `xtimer_now64()` instead of `xtimer_now()`
for updating the `*now` variable during the iteration in
`_update_short_timers()` function. The same function is used to
initialize `*now` in `_timer_callback()` below.
While using `xtimer_now()` in this iteration step does not hinder the
proper execution of all timers in the short term timers (for those the
`xtimer` module only looks at the `start_time` member, not the
`long_start_time` member) at least for the current long term time window
(I did not test higher cases), it sets the `long_start_time` member to 0
for all timers following in the list of timers after this iteration
step. However, external modules that rely on this to be correct,
e.g. evtimer [1], fail their calculations when trying to compare to
the current value to `xtimer_now64()`.
[1] https://github.com/RIOT-OS/RIOT/blob/11f3d68/sys/evtimer/evtimer.c#L118-L121
Co-Authored-By: Cenk Gündoğan <mail+dev@gundogan.net>
'merged.config' may not always be present (e.g. when no files to merge
are present). In order to always have an up-to-date configuration file
'out.config' will be generated mirroring the content of 'autoconf.h'.
This is the file that the build system will include to read the current
configuration symbols.
The sniffer in `tests/gnrc_rpl_srh` always had stability issues, since
it uses some badly synchronized threading of mine. Since v2.4.3 scapy
has its own [asynchronous sniffer] (which is already used in
`tests/gnrc_dhcpv6_client_6lbr`), so I ported my sniffer implementation
to use that instead.
[asynchronous sniffer]: https://scapy.readthedocs.io/en/latest/usage.html#asynchronous-sniffing
GCLK_ID and APBCMASK entries are not always uniform.
The previous hack would already break for TCC3.
Just explosively write down the cases, there are only 5 at most.
