Fix the condition to return -ENOPNOTSUPP when i2c repeated read attempted.
Currently the error occures even if a read after write is attempted.
This is the standard way to i2c_read_reg which should be supported.
The -EOPNOTSUPP requires the previous R/W state to be reading.
This means a `I2C_SR2_TRA` must be checked to be 0.
There is no hardware limitation for custom boards based on STM32 to uses
SPI bus with signals coming from different PORT and alternate functions.
This patch allow alternate's function definition per pin basis, thus enable
the support of SPI bus signals routed on differents PORT.
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
A naive implementation may set a RTC alarm in 30s by calling
struct tm now;
rtc_get_time(&now);
now.tm_sec += 30;
rtc_set_alarm(&now, _cb, NULL);
This works for RTC implementations that use a RTT internally and call
mktime() to convert the struct tm to a unix timestamp, as mktime() will
normalize the struct in the process.
Call rtc_tm_normalize() when the RTC uses separate registers for time / date
components to ensure it is normalized.
This also modifies tests/periph_rtc to exercise this case.
once hardware flow control is enabled, rts should only be initialized
after the uart is enabled by setting the UE flag. This is stated in the
stm32f4 errata.
in uart_poweroff the peripheral should be disabled through the register
instead of just disabling the peripheral clock. In uart_poweron the
peripheral should be enabled after enabling the clock.
Not explicitely disabling the peripheral causes some bad signals on the
uart line sometimes.
- remove old header files
- fix new DMA header file macro definitions
- remove old cpu type groups (STM32L1XX_MD, STM32L1XX_MDP,
STM32L1XX_HD, STM32L1XX_XL)
cpu/stm32_common: cleanup periph eth
boards/nucleo-f767zi: cleanup dependencies
boards/nucleo-f767zi: fix dma configuration attribute for eth
examples/default: add nucleo-767zi in boards with netif
drivers/stm_32_eth: Add header guard for eth_config
Co-authored-By: Robin <robin@chilio.net>
stm32eth: Move to stm32_common periph
cpu/stm32_periph_eth: Rebase to current master branch
- Update DMA to use new vendor headers
- Update send to use iolist. It looks like the packet headers are now transfered as seperate iolist entries which results in the eth periph sending each header as own packet. To fix this a rather ugly workaround is used where the whole iolist content is first copied to a static buffer. This will be fixed soon in another commit
- If MAC is set to zero use luid to generate one
- Small code style fixes
cpu/stm312f7: Add periph config for on-board ethernet
boards/nucleo-f767zi: Add config for on board ethernet
tests/stm32_eth_lwip: Remove board restriction
boards/common/nucleo: Add luid module if stm32 ethernet is used
tests/stm32_eth_gnrc: Add Testcase for gnrc using the stm32 eth periph
stm32_eth: Rework netdev driver layour
tests/stm32_eth_*: Use netdev driver header file for prototypes
stm32_eth: Add auto init for stm32 eth netdev driver
boards/stm32: Enable ethernet conf for nucleo boards
stm32_eth_auto_init: Add dont be pendantic flag
stm32_eth: Remove dma specific stuff from periph_cpu.h
Looks like this was implemented in PR #9171 and 021697ae94 with the same interface.
stm32_eth: Remove eth feature from stm32f4discovery boards
stm32_eth: Migrate to stm32 DMA API
stm32_eth: Add iolist to module deps
stm32_eth: Rework send function to use iolist
stm32_eth: Fix ci build warnings
stm32_eth: Fix bug introduced with iolist usage
stm32_eth: Remove redundant static buffer
stm32_eth: Fix feature dependencies
stm32_eth: Fix wrong header guard name
stm32_eth: Implement correct l2 netstats interface
stm32_eth: Rename public functions to stm32_eth_*
stm32_eth: Fix doccheck
stm32_eth: Move register DEFINE to appropriate header file
stm32_eth: remove untested configuration for f446ze boards
stm32_eth: Move periph configuration struct to stm32_common
stm32_eth: Fix naming of eth_phy_read and eth_phy_write
stm32_eth: Remove obsolete test applications
- EOP bit is cleared by writing 1 to the register.
- Guard EOP bit clear for STM32F2, STM32F4, STM32F7
and STM32L4 EOP bit is only set if EOPIE is enabled.
Since this is not the case for any platform we exclude
it when not needed.
- The PNB in FLASH_CR wasn't cleared before every erase operation
and the new value was just stacked on top. After a couple of erase
the PNB written was overlapping with old ones failing to erase the
correct page.
This commit fixes the clearing of a error condition after read.
This causes the incorrect errorcodes if the register is read
then an error occurs, then it is cleared.
By clearing only after the error is processed the bug is fixed.
This can be tested by reading a i2c slave that is not there.
- Before, HSI was enabled as the default case when it is only
used for stm32f0 and stm32f1. It is now implemented explicitly
for those platforms, and only those.
