19321: examples/gnrc_border_router: add BLE as downlink option r=benpicco a=benpicco
19325: esptools/install.sh: Fix shellcheck issues r=benpicco a=bergzand
### Contribution description
Quote all the things!
### Testing procedure
The script should still work as before
### Issues/PRs references
None
19327: shell/cmds: GNRC: replace puts() with printf() r=benpicco a=benpicco
19328: pkg/u8g2: bump version r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
17091: USBUS: Add URB support r=benpicco a=bergzand
### Contribution description
This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
### Testing procedure
- `tests/usbus_cdc_ecm` should still work. Testing one of the usbdev-supported platform should be sufficient here.
### Issues/PRs references
Needs #17064
18148: sys/flash_utils: helpers to store data in flash r=benpicco a=maribu
### Contribution description
This helpers that allow storing, accessing, and working with data in flash that works for both classical Harvard architectures (which do not map flash also into the address space) as well as modern Harvard architectures and von-Neumann architectures.
With this, `examples/default` again runs on the Arduino Uno / Nano. Since this board is still the "entry kit" for many people to embedded hardware, it would be nice to support it with our default example.
### Testing procedure
`examples/default` should run and work on ATmega boards (especially ATmega328P and ATmega32U4 based boards) as well on all other boards now.
### Issues/PRs references
None
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This allows automatically moving format strings to flash, provided that
code previously compiled fine with `-Wformat-nonliteral` (which in RIOT
is the case due to `-Wformat=2`).
This adds a layer of convenience abstraction over classical Harvard
architectures (like most AVRs) that do not map the flash memory into
the data address space and modern Harvard architectures or von-Neumann
architectures that do so. The motivation is to safe a lot of RAM for
AVR by storing constant strings into flash.
This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
18682: pkg/lwext4: add lightweight implementation of the ext2/3/4 filesystem r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19119: makefiles/tools/serial.inc.mk: Allow detection of debug adapter r=benpicco a=maribu
### Contribution description
This PR adds the ability to automatically detect the debug adapter for boards with an integrated programmer/debugger, if that debugger also provides the TTY.
This extends the TTY detection that can be enabled with `MOST_RECENT_PORT=1` to set `DEBUG_ADAPTER_ID` to the TTY's serial, but only if `DEBUG_ADAPTER_ID_IS_TTY_SERIAL` is set to `1` by the board (as not all boards have an integrated programmer/debugger).
### Testing procedure
Connect a HiFive-1B and a nRF52840DK at the same time and try `make BOARD=<nrf52840dk|hifive1b> MOST_RECENT_PORT=1 -C examples/default flash term` for both. The programmer will not reliably select the correct programmer in `master`. With this PR, it will.
### Issues/PRs references
None
19313: gnrc_static: don't parse address as prefix r=benpicco a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19292: sys/phydat: Fix unit confusion r=miri64 a=maribu
### Contribution description
Previously, `UNIT_G` was used for g-force with the correct symbol `g`, `UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs` (which is an alternative correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition, gram now uses the correct symbol `g`; which sadly is the same as for g-force. But usually there is enough context to tell them apart.
### Testing procedure
Green CI
### Issues/PRs references
None
19307: nanocoap_link_format: fix off-by-one error r=miri64 a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18746: sys/clif: Fixing out of bounds read under certain conditions r=maribu a=Teufelchen1
Hi 😈
This fixes a potential out of bounds read in clif_encode_link. There is no code in RIOT that can be exploited.
The fix does not break the current API but alters the behaviour slightly. Before the change, the length attributes of `clif_attr_t` where optional. If missing, the length was deduced using `strlen()`. This fix makes those parameters required and if they are `0` it operates as if the length really is `0`. This might not be ideal but it is the only non api breaking fix I could think off.
```c
typedef struct {
char *value;
unsigned value_len; NO LONGER OPTIONAL
const char *key;
unsigned key_len; NO LONGER OPTIONAL
} clif_attr_t;
```
Depends on #18744
cc `@leandrolanzieri`
19161: bors.yaml: re-activate labels check + add block_labels r=miri64 a=miri64
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
Previously, `UNIT_G` was used for g-force with the correct symbol `g`,
`UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which
would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs`
(which is an uncommon but correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been
renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition,
gram now uses the correct symbol `g` and Gauss uses `G`.
19299: Add missing newline to output of telnet example r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> The telnet example prints a line to the console, but it is not ended with a newline. When using pyterm, the last line is then never shown as it reads the console line by line and is waiting for the end of the line.
>
> This patch swaps use of `printf` for `puts` for the last line printed. This means the missing newline character gets added. This is also done to be consistent with the rest of the file, where puts is used whenever possible instead of printf.
### Testing procedure
1. `cd examples/telnet`
2. `make all flash term`
3. observe the final line "Local shell disabled" is printed, but would not have without this patch
### Issues/PRs references
- none known
19301: fib: document unused state r=benpicco a=benpicco
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19278: gnrc_dhcpv6_client_simple_pd: select upstream based on type/index r=benpicco a=benpicco
19290: sys/crypto: make AES_KEY struct private & rename it r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
* riot-wrappers:
* Fix infinite loop when using a Mutex
* Make ValueInThread Copy/Clone
* riot-sys:
* Export xxx_DEV (eg. I2C_DEV) C macros as functions
* Add auto_init_utils.h
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19027: sys/fmt: optimize scn_u32_dec scn_u32_hex r=benpicco a=kfessel
### Contribution description
Improves the compilation result for `scn_u32_dec` `scn_u32_hex` especially on `cortex-m` reducing either stack usage and or code size.
This makes use of unsigned int overflow (slightly less better without doing that `hexn`).
See godbolt (original versions got an `o` attached, modified versions got `k`s) all functions are marked `_S_` defined to `static`
by assigning the global at end the compiled function can be changed (`deco deck hexo hexk hexkk hexn`)
this PR is `hexkk` and `deck`
### Testing procedure
run unit-test/test-fmt
```
<RIOT>/tests/unittests$ make tests-fmt
<RIOT>/tests/unittests$ make term
```
### Issues/PRs references
[godbolt](https://godbolt.org/z/MzT1zh4q1)
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
19272: gcoap: Do not send responses from multicast addresses r=benpicco a=chrysn
### Contribution description
Since https://github.com/RIOT-OS/RIOT/pull/18026, CoAP requests to multicast addresses (eg. `ff02::1`) came back from that exact address, which Linux rightfully just drops.
The fix uses the existing multicast check from https://github.com/RIOT-OS/RIOT/pull/17978 (thanks `@benpicco` for making me write this as dedicated function, I just had to generalize it removing one struct layer), and foregoes setting the source address when responding to multicasts.
### Testing procedure
* Run the gcoap example
* Send a CoAP request to a multicast address RIOT listens to, eg. `./aiocoap-client coap://'[ff02::1%tapbr0]'/.well-known/core --non`
Before, this got no response (while you see it arrive on wireshark). After, you get a correct response with two lines of note:
```
WARNING:coap:Sending request to multicast via unicast request method
Response arrived from different address; base URI is coap://[fe80::3c63:beff:fe85:ca96%tapbr0]/.well-known/core
```
(The former is aiocoap telling us that we're not using the nonexistent multicast API so it's really more of an anycast, the latter is useful factual information).
Co-authored-by: chrysn <chrysn@fsfe.org>
17045: sys/coding: add XOR based coding module r=benpicco a=benpicco
19243: cpu/gd32v: add periph_gpio_ll and periph_gpio_ll_irq support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_gpio_ll` and `periph_gpio_ll_irq` support for GD32VF103. Level triggered interrupts are emulated.
`periph_gpio_ll_irq` could be split off from this PR as a separate PR if necessary.
### Testing procedure
Use any GD32V board and connect PA0 -> PB0 and PA1 -> PB1 where PA is the output port and PB the input port. With these connections `tests/periph_gpio_ll` should work.
```
BOARD=sipeed-longan-nano make -j8 -C tests/periph_gpio_ll flash term
```
If necessary, change the input and output pins by setting the environment variables and connect the corresponding pins, for example for `seeedstudio-gd32` PA1 -> PB8 and PA8 -> PB9:
```
PIN_OUT_0=1 PIN_OUT_1=8 PIN_IN_0=8 PIN_IN_1=9 BOARD=seedstudio-gd32 make -j8 -C tests/periph_gpio_ll flash term
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19088: boards: add esp32s3-pros3 support r=benpicco a=gschorcht
### Contribution description
This PR provides the support for [ESP32 ProS3](https://esp32s3.com/pros3.html#home) board from Unexpected Maker.
This board doesn't have a USB-to-Serial chip on board. Therefore, USB Serial/JTAG is used for STDIO and the board is flashed via the USB Seral/JTAG interface by default.
### Testing procedure
Flashing `tests/shell` should work.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
This implements the XOR based error-correction code described by
Jürgen Fitschen (@jue89) at the RIOT Summit.
A parity byte is generated for each 3 payload bytes, then the payload array
is transposed by interpreting it as a 2D matrix with height of 3.
This is to reduce the chance of consecutive bytes ending up in the same
packet.
This allows to recover one in 3 lost data packets (if parity packets are received).
[0] https://summit.riot-os.org/2021/wp-content/uploads/sites/16/2021/09/s02-01.pdf
Even if only `stdio_usb_serial_jtag` is enabled as STDIO, `usb_board_reset` is enabled since there should be a CDC ACM interface in any case. This is necessary, for example, to reset the board into bootloader if `stdio_cdc_acm` or `stdio_tinyusb_cdc_acm` was previously used.
18903: pkg/tinyusb: add tinyUSB netdev driver r=dylad a=gschorcht
### Contribution description
This PR adds the tinyUSB netdev driver.
The tinyUSB netdev driver is part of the tinyUSB package and is enabled by module `tinyusb_netdev`. It is available for boards that provide the `tinyusb_device` feature.
**Please note** Since the tinyUSB package is distinct from (and incompatible with) the USB stack provided around USBUS in RIOT (see USB), the tinyUSB netdev driver cannot be used together with with any USBUS device class.
The tinyUSB netdev driver uses Ethernet over USB and supports the following protocols:
- CDC ECM (Ethernet Control Model)
- CDC NCM (Network Control Model)
- RNDIS (Microsoft Remote NDIS)
While Linux and macOS support all these protocols, Microsoft Windows only supports the RNDIS protocol and since Windows version 11 also the CDC NCM protocol. macOS supports the RNDIS protocol since version 10.15 (Catalina).
Which protocol is used is selected by the corresponding pseudomodules `tinyusb_class_net_cdc_ecm`, `tinyusb_class_net_cdc_ncm` and `tinyusb_class_net_rndis`.
The CDC ECM protocol (`tinyusb_class_net_cdc_ecm`) and the RNDIS protocol (`tinyusb_class_net_rndis`) can be used simultaneously to support all operating systems, for example :
```
USEMODULE='tinyusb_netdev tinyusb_class_net_rndis tinyusb_class_net_cdc_ecm' \
BOARD=... make -C ... flash
```
In this case, the CDC ECM protocol is the default protocol and the RNDIS protocol the alternative protocol defined as second device configuration. The CDC NCM protocol cannot be used together with the CDC ECM or the RNDIS protocol.
This PR includes PR #18983 for now to be compilable.
Comparison with USBUS CDC ECM (`nucleo-f767zi` board):
```
text data bss dec hex filename
65916 596 18728 85240 14cf8 tests_pkg_tinyusb_netdev.elf
```
```
text data bss dec hex filename
63120 544 15444 79108 13504 tests_usbus_cdc_ecm.elf
```
### Testing procedure
Use a board that is supported by tinyUSB. Compile and flash the test application for each protocol:
1. RNDIS
```
BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
2. CDC ECM
```
CLASS=tinyusb_class_net_cdc_ecm BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
3. CDC NCM
```
CLASS=tinyusb_class_net_cdc_ncm BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
For each test, a network interface should be added on the host. Use command `ifconfig` on USB device and on the host and check that both have a link local address. In syslog there should be an output like the following:
<details>
```
Nov 13 18:14:46 gunny8 kernel: [4611465.480025] usb 1-2.2: new full-speed USB device number 28 using xhci_hcd
Nov 13 18:14:47 gunny8 kernel: [4611465.581641] usb 1-2.2: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
Nov 13 18:14:47 gunny8 kernel: [4611465.581646] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 13 18:14:47 gunny8 kernel: [4611465.581650] usb 1-2.2: Product: nucleo-f767zi
Nov 13 18:14:47 gunny8 kernel: [4611465.581653] usb 1-2.2: Manufacturer: RIOT-os.org
Nov 13 18:14:47 gunny8 kernel: [4611465.581654] usb 1-2.2: SerialNumber: 6591620BCB270283
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.1066] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/528)
Nov 13 18:14:47 gunny8 kernel: [4611465.594604] rndis_host 1-2.2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2.2, RNDIS device, fa:db:7c:1b:58:80
Nov 13 18:14:47 gunny8 mtp-probe: checking bus 1, device 28: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2"
Nov 13 18:14:47 gunny8 mtp-probe: bus: 1, device: 28 was not an MTP device
Nov 13 18:14:47 gunny8 systemd-udevd[17796]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 kernel: [4611465.643852] rndis_host 1-2.2:1.0 enp0s20f0u2u2: renamed from usb0
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.1833] device (usb0): interface index 508 renamed iface from 'usb0' to 'enp0s20f0u2u2'
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2037] device (enp0s20f0u2u2): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnetBridge: Adding interface enp0s20f0u2u2 index:508
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2075] device (enp0s20f0u2u2): carrier: link connected
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2129] settings: (enp0s20f0u2u2): created default wired connection 'Kabelgebundene Verbindung 2'
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <warn> [1668359687.2142] device (enp0s20f0u2u2): connectivity: "/proc/sys/net/ipv4/conf/enp0s20f0u2u2/rp_filter" is set to "1". This might break connectivity checking for IPv4 on this device
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2151] device (enp0s20f0u2u2): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2
Nov 13 18:14:47 gunny8 systemd-udevd[17796]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2403] policy: auto-activating connection 'Kabelgebundene Verbindung 2' (0b1ae45e-c76e-3efb-a2cd-138ca2b2a59c)
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2414] device (enp0s20f0u2u2): Activation: starting connection 'Kabelgebundene Verbindung 2' (0b1ae45e-c76e-3efb-a2cd-138ca2b2a59c)
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2419] device (enp0s20f0u2u2): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2429] device (enp0s20f0u2u2): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2440] device (enp0s20f0u2u2): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2445] dhcp4 (enp0s20f0u2u2): activation: beginning transaction (timeout in 45 seconds)
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: Joining mDNS multicast group on interface enp0s20f0u2u2.IPv6 with address fe80::dba4:adb8:9ffe:d93e.
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: New relevant interface enp0s20f0u2u2.IPv6 for mDNS.
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: Registering new address record for fe80::dba4:adb8:9ffe:d93e on enp0s20f0u2u2.*.
Nov 13 18:14:47 gunny8 kernel: [4611465.895046] userif-1: sent link down event.
Nov 13 18:14:47 gunny8 kernel: [4611465.895052] userif-1: sent link up event.
```
</details>
Ping from and to the host.
### Issues/PRs references
Depends on PR https://github.com/RIOT-OS/RIOT/pull/18983
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19055: shell/gnrc_icmpv6_echo: acquire ZTIMER_USEC clock for time measurement r=benpicco a=jue89
19188: cpu/gd32v: add periph_adc support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_adc` support and is one of a bunch of follow up PRs that complete the peripheral drivers for GD32VF103.
This PR depends on PR #19170 and includes this PR to be compilable since includes the ADC configuration also for Sipeed Longan Nano board.
### Testing procedure
`tests/periph_adc` should work on any GD32VF103 board.
### Issues/PRs references
Depends on PR #19170
19225: sys/net/dhcpv6: include IA Prefix Option in SOLICIT r=benpicco a=benpicco
Co-authored-by: Jue <me@jue.yt>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19193: rust: Update dependencies, use riot-wrappers from git r=benpicco a=chrysn
### Contribution description
As riot-wrappers has advanced a bit since it was last released, Rust modules are switched to using it from git again. (This is a regular ping-pong between testing the latest release in RIOT master, and using released support crates when they're current).
This primarily updates riot-wrappers, which has accumulated several compatible changes. Several other crates receive updates as well.
### Testing procedure
* Green CI
### Issues/PRs references
Changes on the riot-wrappers side:
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/17
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/22
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/29
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/30
[edit: added:]
This also serves to help preparing a 0.8.1 release of riot-wrappers, which performs some deprecations so that a breaking 0.9 change can be done more effortlessly later on.
19214: cpu/gd32v: add periph_spi support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_spi` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V.
### Testing procedure
`tests/periph_spi` as well as a test with any SPI sensor should work. `tests/driver_sdcard_spi` should work on `sipeed-longan-nano`.
### Issues/PRs references
Depeneds on PR #19216
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19199: sys/suit: Ensure previous thread is stopped before reusing its stack r=benpicco a=chrysn
### Contribution description
Closes: https://github.com/RIOT-OS/RIOT/issues/19195
If the thread has released the mutex but the thread has not terminated (which happens in the situation that would previously have overwritten a still active thread's state), then a warning is shown and the trigger is ignored.
### Testing procedure
This should work before and after:
* `make -C examples/suit_update BOARD=native all term`
* `aiocoap-client coap://'[fe80::3c63:beff:fe85:ca96%tapbr0]'/suit/trigger -m POST --payload 'coap://[2001:db8::]/foo'`
* In parallel, on the RIOT shell, run `suit fetch coap://[2001:db8::]/foo`
* After the first download fails, the second one starts right away ("suit_worker: update failed, hdr invalid" / "suit_worker: started").
Run again with the worker thread on low priority:
```patch
diff --git a/sys/suit/transport/worker.c b/sys/suit/transport/worker.c
index a54022fb28..e26701a64c 100644
--- a/sys/suit/transport/worker.c
+++ b/sys/suit/transport/worker.c
`@@` -70 +70 `@@`
-#define SUIT_COAP_WORKER_PRIO THREAD_PRIORITY_MAIN - 1
+#define SUIT_COAP_WORKER_PRIO THREAD_PRIORITY_MAIN + 1
```
Before, this runs the download once silently (no clue why it doesn't run it twice, but then again, I claim there's concurrent memory access from two thread, so who knows what happens). After, it runs a single download and shows an error message for the second one once the first is complete ("Ignoring SUIT trigger: worker is still busy.").
### Issues/PRs references
This may be made incrementally easier by https://github.com/RIOT-OS/RIOT/pull/19197 -- that PR as it is now would spare us the zombification (because returning would do that), and having a `wait` function would allow us to turn the new error case into a success.
19205: boards/common: add common timer config for GD32VF103 boards r=benpicco a=benpicco
19207: examples/gnrc_border_router: static: use router from advertisements by default r=benpicco a=benpicco
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19178: nanocoap_sock: store message ID in nanocoap_sock_t r=benpicco a=benpicco
19186: cpu/gd32v: add periph_rtc support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_rtc` support and is one of a bunch of follow up PRs that complete the peripheral drivers for GD32VF103.
### Testing procedure
`tests/periph_rtc` should work and should give the following output:
```
Help: Press s to start test, r to print it is ready
START
main(): This is RIOT! (Version: 2023.04-devel-144-gc17695-cpu/gd32v/periph_rtc)
RIOT RTC low-level driver test
This test will display 'Alarm!' every 2 seconds for 4 times
Setting clock to 2020-02-28 23:59:57
Clock value is now 2020-02-28 23:59:57
Setting alarm to 2020-02-28 23:59:59
Alarm is set to 2020-02-28 23:59:59
Alarm cleared at 2020-02-28 23:59:57
No alarm at 2020-02-28 23:59:59
Setting alarm to 2020-02-29 00:00:01
Alarm!
Alarm!
Alarm!
Alarm!
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
19156: core/compiler_hints: add likely() / unlikely() hints r=kfessel a=benpicco
19174: tests/periph_spi clearly say when init succeeds r=benpicco a=jdavid
When the `tests/periph_spi` program succeeds the output can be interpreted as an error happened.
This PR makes it clearer when it does succeed.
### Contribution description
In `tests/periph_spi`:
- Explicitely say that the init operation was successful
- Rephrase the note to avoid misinterpretations
### Testing procedure
Run the `tests/periph_spi` program.
There is not much to test, just to verify the output, should be like this:
```
2023-01-19 10:42:33,768 # Trying to initialize SPI_DEV(1): mode: 0, clk: 0, cs_port: 0, cs_pin: 0
2023-01-19 10:42:33,777 # (if below the program crashes with a failed assertion, then it means the configuration is not supported)
2023-01-19 10:42:33,779 # Success.
```
### Issues/PRs references
Issue https://github.com/RIOT-OS/RIOT/issues/19025
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: J. David Ibáñez <jdavid.ibp@gmail.com>
19157: sys/shell_lock: do not call strlen, less jumpy r=benpicco a=kfessel
### Contribution description
the current `_safe_strcmp` depends on not being optimized and not being inlined (implicitly given by the -O0), this new one does less (would say not since even O3 had compile results that should not return early or show different runtimes for different secrets).
the runtime of strlen depend on the length of the string (password) therefor it is removed. `ifs` are very jumpy and depend on the contend of password, this avoids `ifs` sadly clang still compiles some boolean statements to if.
with this PR the `__attribute__((optimize("O0")))` should be removable.
### Testing procedure
see https://godbolt.org/z/x35b85cEx
and run the `<RIOT>/tests/shell_lock`
### Issues/PRs references
#19155 made me aware of this function
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
