Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Marian Buschsieweke
7aab478678
drivers/soft_spi: update API to match periph_spi
2021-08-06 12:47:00 +02:00
Marian Buschsieweke
9e5f7b6797
drivers/periph_spi: make spi_acquire() return void
...
There is no way to properly handle incorrect SPI parameters at run time, so
just having an assertion blow up is the better choice here.
As most instances of `spi_acquire()` don't check the return value anyway, this
will improve debugging experience quite a bit. Some implementation of
spi_acquire() don't even check parameters anyway.
2021-08-06 12:46:57 +02:00
benpicco
feac187d54
Merge pull request #16506 from benpicco/drivers/dose-rx_start
...
drivers/dose: make use of start condition received interrupt
2021-07-28 17:21:29 +02:00
Benjamin Valentin
d48f673597
drivers/dose: make use of periph_uart_rx_start feature
2021-07-28 16:19:04 +02:00
Benjamin Valentin
0964a217b5
rtt_rtc: add rtc_settimeofday() & rtc_gettimeofday()
2021-07-27 22:12:25 +02:00
Benjamin Valentin
9194440ead
drivers/periph/uart: add periph_uart_rx_start feature
2021-07-27 16:29:30 +02:00
benpicco
07b3e19d01
Merge pull request #16632 from maribu/periph/uart
...
periph/uart: Fix doc, use errno for return values
2021-07-21 00:12:24 +02:00
Jose Alamos
b299299ad3
drivers/sx126x: fix NETOPT_RX_SYMBOL_TIMEOUT
2021-07-14 14:11:15 +02:00
Jose Alamos
c6da77a454
Revert "drivers/sx127x: fix size of rx symbol timeout"
...
This reverts commit 26ead7b5be
2021-07-13 21:14:28 +02:00
Marian Buschsieweke
e7cacf6f60
periph/uart: Fix doc, use errno for return values
...
Some terminology issues are fixed. (The speed of an UART interface is
the symbol rate. The unit it is measured in is baud, which is symbols
per second. There is no such thing as baudrate or even baud/s.)
The return codes are changed to use negative errno constants on error
to match the driver design rules. For backward compatibility, the
enum was updated to match the error codes. Unless an application
depends on the exact numerical value (which would be insane), this is
not breaking any code.
2021-07-09 17:06:01 +02:00
Akshai M
17ad0fc5a7
driver/sx126x : Add set_rf_mode interface
2021-07-09 11:16:41 +02:00
Akshai M
8870a885cb
drivers/sx126x : Add stm32wl variant
2021-07-09 11:16:41 +02:00
Akshai M
8d43dbf67f
drivers/sx126x : Update NETOPT_RX_xx
...
r/NETOPT_RX_TIMEOUT/NETOPT_RX_SYMBOL_TIMEOUT
Use sx126x_symbol_to_msec() to calculate the RX timeout in ms.
2021-07-08 12:19:36 +02:00
Akshai M
a3ed19e0ee
drivers/sx126x.h : Add sx126x_symbol_to_msec()
2021-07-08 12:19:36 +02:00
Fabian Hüßler
c50149e488
drivers/ina3221: refactor
2021-07-07 08:40:02 +02:00
Francisco
ccfd3ee980
Merge pull request #16597 from jia200x/pr/sx126x_kconfig
...
sx126x: add support for multiple simultaneous variants
2021-07-06 13:19:15 +02:00
benpicco
8f9233f329
Merge pull request #16232 from maribu/drivers/cc110x
...
drivers/cc110x: add power off (sleep) functions
2021-07-06 12:24:26 +02:00
Francisco
daeac91aea
Merge pull request #16604 from jia200x/pr/lora/fix_rx_timeout_size
...
netdev/lora: fix size of NETOPT_RX_SYMBOL_TIMEOUT
2021-07-06 12:15:00 +02:00
Marian Buschsieweke
3d76875f38
drivers/cc110x: style fixes
2021-07-06 10:12:21 +02:00
Francisco Acosta
0efc13602f
drivers/cc110x: add power off (sleep) functions
2021-07-06 10:11:55 +02:00
Jose Alamos
2e5b7f9e31
sx126x: add support for multiple simultaneous variants
2021-07-05 16:02:15 +02:00
Jose Alamos
26ead7b5be
drivers/sx127x: fix size of rx symbol timeout
2021-07-01 11:58:34 +02:00
Kevin "Tristate Tom" Weiss
25c871ed9a
Merge pull request #16576 from jia200x/pr/netdev/migrate_dst_filter
...
ieee802154: migrate `netdev_ieee802154_dst_filter` to a common ieee802154
2021-06-29 10:50:08 +02:00
Jose Alamos
dfeb57b7f8
netdev_ieee802154: deprecate netdev_ieee802154_dst_filter
2021-06-23 16:44:07 +02:00
Benjamin Valentin
c1eead925d
drivers/slipdev: register with netdev
2021-06-21 12:42:03 +02:00
Benjamin Valentin
9a548b834f
drivers/ethos: register with nedev
2021-06-11 12:31:37 +02:00
Benjamin Valentin
2467c84634
drivers/ethos: enable multiple instances
2021-06-11 12:31:37 +02:00
benpicco
41bbafdfe4
Merge pull request #16328 from benpicco/driver/lis2dh12-cleanup
...
drivers/lis2dh12: clean up API
2021-06-03 15:33:04 +02:00
Benjamin Valentin
392bacd9c7
drivers/lis2dh12: add support for temperature sensor
2021-06-03 12:59:50 +02:00
Benjamin Valentin
28148b7dc3
drivers/lis2dh12: general cleanup
...
Don't expose raw register values for the user to figure out
2021-06-03 12:59:50 +02:00
Benjamin Valentin
e8264d3ea9
drivers/lis2dh12: fix event handling
...
Don't push event handling to the user.
2021-06-03 12:59:50 +02:00
39094d0833
drivers/sx127x: uncrustify code
2021-05-18 11:00:44 +02:00
Jnae
b287d120ff
at86rf215: timestamp counter for rx frames
2021-05-12 15:27:36 +02:00
benpicco
619a444741
Merge pull request #16347 from benpicco/drivers/rtt_rtc-rtc_get_time_ms
...
drivers/rtt_rtc: implement rtc_get_time_ms()
2021-05-05 19:13:21 +02:00
benpicco
2b6454a2d7
Merge pull request #16106 from fabian18/ieee802154_security_small_bugfix_and_stricter_names
...
net/ieee802154_security: small bugfix and stricter names
2021-05-03 11:29:43 +02:00
Benjamin Valentin
dcebc7d480
drivers/rtt_rtc: implement rtc_get_time_ms()
...
RTC on RTT usually runs at a frequency greater than 1 Hz, so sub-second
precision is available.
Add a function to get the current RTC timestamp together with it's sub-second
component.
2021-05-03 00:09:18 +02:00
benpicco
0493292ef3
Merge pull request #15908 from benpicco/drivers/periph_common-flashpage
...
drivers/periph: flashpage: add common helper functions
2021-04-27 18:54:10 +02:00
Benjamin Valentin
d611a264fd
drivers/cc2420: register with netdev
2021-04-27 17:37:52 +02:00
Benjamin Valentin
917cf85225
drivers/periph: flashpage: add common helper functions
2021-04-27 16:52:36 +02:00
Fabian Hüßler
7036c2b9ee
sys/net/link_layer/ieee802154: fix small typos
2021-04-27 08:54:19 +02:00
Benjamin Valentin
45fbcee7dc
drivers/soft_uart: fix typo in eMail address
...
Somehow an extra letter has sneaked into the mail and was copy & pasted
around.
2021-04-26 17:15:17 +02:00
Benjamin Valentin
db0edd3ec1
drivers/lis2dh12: power mode -> resolution
...
This is easier to understand.
2021-04-23 17:21:04 +02:00
Bas Stottelaar
cc645c083e
Merge pull request #15684 from iosabi/drv_si705x
...
drivers/si70xx: Add support for Si705x sensors
2021-04-21 22:29:01 +02:00
Marian Buschsieweke
855a6fa36a
Merge pull request #16296 from fabian18/nrf24l01p_ng_eui_get
...
drivers/nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-21 13:56:30 +02:00
iosabi
f72efb1daf
drivers/si70xx: Add support for Si705x sensors
...
The Silicon Labs Si705x sensors (Si7050/1/3/4/5) are very similar to the
Si7021 sensors featuring only a temperature sensor and no humidity
sensor. The only difference between the Si705x is the temperature
accuracy of the reading, ranging from +/- 0.1 C in the Si7051 to +/- 1 C
in the Si7050.
This patch adds support for this family of sensors extending the
functionality of the existing si70xx driver. Following the style of
other modules, this implements a pseudomodule per supported chip, adding
si7050, si7051, si7053, si7054 and si7055 pseudomodules.
As a minor change this patch also implements the missing
si70xx_get_serial, si70xx_get_id and si70xx_get_revision functions that
were declared in the si70xx.h header but implemented as private
functions. The si70xx_get_id() may be relevant for the application to
know at run time exactly which version of the hardware is installed.
The updated test running with a Si7051 shows the following output, which
seems consistent with the room temperature conditions during the test.
```
make SI70XX_VARIANT=si7051 -C tests/driver_si70xx/ all flash
```
```
SI70XX temperature and humidity sensor test application
Initializing sensor...
[OK]
Found SI7051 sensor, revision 32
temperature: 24.71 C
temperature: 24.69 C
```
2021-04-17 20:14:35 +00:00
benpicco
fa8057ffbf
Merge pull request #16180 from nicoHarel/drivers/ds3231
...
drivers/ds3231: add alarm support
2021-04-13 13:57:16 +02:00
Fabian Hüßler
f5f2decfa4
nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-09 17:39:40 +02:00
6ee94bdcdf
Merge pull request #16222 from fjmolinas/pr_driver_sgp30
...
driver/sgp30: initial import
2021-04-09 14:00:38 +02:00
Marian Buschsieweke
93ba8bea3b
Merge pull request #16286 from fabian18/cc110x_eui_get
...
drivers/cc110x: add hook cc1xxx_eui_get()
2021-04-08 12:51:46 +02:00
Fabian Hüßler
d8affca746
drivers/cc110x: add weak function cc1xxx_eui_get()
2021-04-08 10:38:16 +02:00
Francisco Molina
478624cbb6
driver/sgp30: initial import
2021-04-08 10:14:30 +02:00
Leandro Lanzieri
e7732d9a00
Merge pull request #16217 from fjmolinas/pr_driver_sm_pwm_01c
...
drivers/sm_pwm_01c: initial import
2021-04-08 09:04:38 +02:00
Francisco Molina
240c016143
drivers/sm_pwm_01c: initial import
2021-04-07 12:05:09 +02:00
Nicolas Harel
c710aff9c6
drivers/ds3231: add alarm support
...
tests/driver_ds3231
drivers/ds3231: add alarm support with IRQ
drivers/ds3231: alarm support and documentation
drivers/ds3231: alarm interrupt with mutex
drivers/ds3231: alarm, _unlock function
fixup! drivers/ds3231: add alarm support
2021-04-06 14:48:31 +02:00
2fb6a11407
drivers/flashrom: remove deprecated flashrom API (since 2017)
2021-04-05 17:06:24 +02:00
0b5b9bd80f
drivers: add implementation for sx126x lora radio
2021-03-30 16:12:39 +02:00
Marian Buschsieweke
1d0ee42046
drivers/at86rf2xx: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
08063bebfe
drivers/at86rf215: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
fba104c2ce
drivers/kw2xrf: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
a18ec987bf
drivers/mrf24j40: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
52c8be9da9
drivers/mrf24j40: drop unused define
...
MRF24J40_OPT_REQ_AUTO_ACK is never used and wrongly documented. Let's
just drop it.
2021-03-22 08:15:53 +01:00
chrysn
3a719c69c7
doc/SAUL: State expectations on blocking and interrupts
2021-03-21 14:35:01 +01:00
Marian Buschsieweke
40859b61f0
drivers/periph_spi: fix Doxygen commands
...
use @retval to document individual return values rather than @return
2021-03-17 10:34:20 +01:00
benpicco
2614831c86
Merge pull request #16137 from maribu/stm32_rtt
...
drivers/periph_rtt: add periph_rtt_set_counter feautre
2021-03-08 16:53:57 +01:00
Francisco
d369dffb4f
Merge pull request #14339 from aabadie/pr/sys/auto_init_screen
...
drivers: sys/auto_init: pkg/lvgl: setup disp_dev, touch_dev and lvgl auto_init
2021-03-04 19:23:32 +01:00
Marian Buschsieweke
b9cb75fedf
drivers/periph/rtt: add periph_rtt_set_counter feature
...
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
2021-03-04 18:05:06 +01:00
benpicco
753c833109
Merge pull request #15871 from jan-mo/feat/20210120_lis2dh12_extension
...
driver_lis2dh12: functionality extension
2021-03-04 15:20:55 +01:00
Jan Mohr
4598602176
drivers/lis2dh12: functionality extension
2021-03-04 00:43:04 +01:00
c1c9785da1
drivers/usbdev_mock: add to drivers_misc category
2021-03-03 18:09:39 +01:00
d227a117a2
drivers/screen_dev: add a bit of documentation
2021-03-03 18:04:42 +01:00
1362c61abb
drivers/stmpe811: add runtime configurable event callback
2021-03-03 18:00:49 +01:00
528d884b5d
drivers/touch_dev: extend API to set event callback function
2021-03-03 18:00:49 +01:00
0f9693b18f
drivers/touch_dev: add touch driver registry
2021-03-03 18:00:48 +01:00
f4bc980236
drivers/disp_dev: add display driver registry
2021-03-03 18:00:48 +01:00
Jean Pierre Dudey
a30184b5a9
Merge pull request #15896 from maribu/spi-api-cleanup
...
drivers/periph/spi: clean up error codes and doc
2021-02-27 01:09:49 +01:00
Martine Lenders
de4ee0f934
Merge pull request #15562 from benpicco/socket_zep_register
...
socket_zep: register with netdev, provide EUI-64 as command line parameter
2021-02-20 20:32:01 +01:00
Memiks
e6cb7392d7
drivers/bmx280: remove unused parameter spi3w_en #15954
2021-02-16 09:04:08 +09:00
Marian Buschsieweke
acd9f4cc1a
drivers/periph_ptp: fix adjustment API
...
The clock adjustment API only used a 16 bit integer for speed correction. This
is to course grained to allow compensating clock drifts at high accuracy.
Using a 32 bit integer instead would allow to fix for a drift of up to
about 1 nanosecond drift per each 5 seconds.
That ought to be enough for anyone! (*cough* *cough*)
2021-02-10 09:55:52 +01:00
Francisco Molina
85caf7cbc7
drivers/flashpage: add FLASHPAGE_ERASE_STATE definition
2021-02-09 11:11:46 +01:00
benpicco
a5e5ec5215
Merge pull request #15897 from bergzand/pr/riotboot/flashwrite_remove_flashpage_size
...
riotboot/flashwrite: Remove last dependencies on flashpage size
2021-02-01 17:21:09 +01:00
Jens Wetterich
533428448d
drivers/ina3221: Add docs to SAUL group
2021-02-01 14:31:11 +01:00
Jens Wetterich
8dff7b57ad
drivers/ina3221: Fix compatibility with C++
2021-02-01 14:31:11 +01:00
c93c3e46d6
flashpage: Support non uniform flashpage sizes
2021-02-01 14:27:22 +01:00
Marian Buschsieweke
ae79f5fc59
drivers/periph/spi: clean up error codes and doc
...
- Use negative errno as error codes, rather than home-grown enums
- Update the home-grown enum with negative errno codes for backward
compatibility and mark it deprecated
- Update API doc to use negative errno codes
- Fix various style issues in Doxygen doc
- Use `@retval` to document specific return values instead of abusing
`@return` for this
- Align parameters to proper indent level
2021-02-01 11:02:14 +01:00
Benjamin Valentin
e8bbe1d1c7
mtd: re-add mtd_write_page()
...
Add a write_page() command that performs a read-modify-write cycle
if necessary.
2021-01-28 11:51:28 +01:00
Benjamin Valentin
60eb75da3c
mtd: rename mtd_write_page() -> mtd_write_page_raw()
...
The function will not abstract away the behavior of the underlying media
(e.g. whether only 1 -> 0 writes are possible without erase), thus rename it.
2021-01-26 11:48:26 +01:00
Benjamin Valentin
d8918c24fa
socket_zep: register with netdev
2021-01-25 22:59:01 +01:00
Fabian Hüßler
7d618afa17
nrf24l01p_ng: make use of netdev_register()
2021-01-24 20:49:39 +01:00
Fabian Hüßler
063ff60890
drivers/include: add NETDEV_NRF24L01P_NG
2021-01-24 20:49:39 +01:00
fabian18
f7a77ebb04
drivers/nrf24l01p_ng: netdev driver for nrf24l01+
...
The driver uses the netdev interface. Due to the limited
capabilities of the transceiver (32 byte FIFO and no source address in the layer2 frame),
it relies on 6LowPAN compression and adds the source address to the frame for that.
2021-01-24 20:49:39 +01:00
Jean Pierre Dudey
273721efc0
drivers: add bq2429x power management IC driver
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-01-22 19:30:12 +01:00
0eba27161e
cst816s: Initial include of cst816s touch screen driver
2021-01-14 18:17:51 +01:00
Francisco Molina
960e0c5f43
sys/ieee802154/submac: add handling of invalid CRC frames
2021-01-13 23:42:45 +01:00
ac9d8e603e
drivers/pca9685: fix typo (oscilator => oscillator)
2021-01-08 10:15:33 +01:00
Martine Lenders
640ff4f5d8
Merge pull request #15609 from maribu/ethernet-rx-timestamp
...
sys/net/gnrc/netif/ethernet: Support RX timestamp
2021-01-07 19:53:52 +01:00
Marian Buschsieweke
f6bca70d11
sys/net/gnrc/netif/ethernet: Support RX timestamp
2021-01-06 20:30:14 +01:00
quangphhr
afa723b2f7
drivers/hsc: add driver for honeywell pressure and temperature sensor
2021-01-06 10:22:17 +01:00
Marian Buschsieweke
e5a0154255
Merge pull request #14660 from maribu/netdev_confirm_send
...
drivers/net: Add netdev_driver_t::confirm_send
2021-01-05 16:11:20 +01:00
Marian Buschsieweke
53fcb97b2f
drivers/net: Add netdev_driver_t::confirm_send
...
Changed the API of `netdev_driver_t`:
- The `send()` function should no longer return the number of bytes and should
not block
- The upper layer now must call the new `confirm_send()` function after
calling `send()`; either busy waiting until something different to `-EBUSY`
is returned, or after `NETDEV_EVENT_TX_COMPLETE` was signaled
During transition to the new API, the upper layer must remain backward
compatible and must assume the legacy API if `netdev_driver_t::confirm_send()`
is `NULL`.
2021-01-05 15:34:11 +01:00
Leandro Lanzieri
675ddb6ccc
drivers/pn532: use pseudomodules to select i2c or spi
2021-01-04 16:55:16 +01:00
Jens Wetterich
e36a0d883a
esp_common/esp_now: use netdev_register()
2020-12-23 19:44:57 +01:00
benpicco
770bda165a
Merge pull request #15571 from iosabi/drv_si1133
...
drivers/si1133: New SI1133 UV/IR/Ambient light driver
2020-12-14 08:41:00 +01:00
iosabi
ce76125a22
drivers/si1133: New SI1133 UV/IR/Ambient light driver
...
The SI1133 from Silicon Labs is a UV Index Sensor and Ambient Light
Sensor in a small 2x2 mm DFN package. The sensor can measure
independently ultra violet (UV) light, infra red (IR) light and
ambient light, however the ambient light is also influenced by the
IR light requiring compensation from the IR readings.
The SI1133 is quite different from other Silicon Labs chips in RIOT OS
and therefore needs its own driver. In particular, the SI1133 has 7
different photodiode configurations to read but only 6 channels to
read them in parallel so only some channels can be read each time.
This patch implements a new driver allowing to read the data directly
and a saul interface for the three kinds of light source. There are
many configuration options including interrupts and continous modes
that are left out of this initial driver.
2020-12-14 03:13:23 +00:00
dylad
7cbaa3f890
net/netdev: create SAM0 Ethernet entry in netdev_type_t
2020-12-13 21:41:20 +01:00
chrysn
272c8d29cc
Merge pull request #13908 from benpicco/periph/dac_play
...
drivers/periph_common: dac: add dac_play()
2020-12-11 07:31:44 +01:00
benpicco
1477a340fe
Merge pull request #15150 from fabian18/ieee802154_security
...
Initial implementation of IEEE 802.15.4 security
2020-12-09 14:14:27 +01:00
Akshai M
bfd3a903fb
drivers/rn2xx3 : r/LORAMAC_DEFAULT_AR/CONFIG_RN2XX3_DEFAULT_AR
...
Move 'LORAMAC_DEFAULT_AR' to drivers/rn2xx3 i.e
'RN2XX3_DEFAULT_AR'
Move 'RN2XX3_DEFAULT_AR' to 'CONFIG_' namespace
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-12-08 11:33:44 +01:00
Benjamin Valentin
ceb3f8443a
drivers/dac_dds: add module to play sample buffer over a DAC
...
This adds an API function to play a buffer of Audio samples using a DAC.
Double buffered operation is supported by specifying a callback that will
be called when the next buffer can be queued with dac_dds_play().
2020-12-04 23:12:32 +01:00
Fabian Hüßler
1b5bcec554
drivers/netdev: Add IEEE 802.15.4 security
2020-12-04 09:40:55 +01:00
Akshai M
d65a4b3f97
drivers/ili9341 : Update documentation
2020-12-03 14:20:34 +01:00
Akshai M
9f81956e41
drivers/ili9341 : Model 'CONFIG_ILI9341_LE_MODE' as BOOL
2020-12-03 14:20:34 +01:00
Akshai M
a322c6d4c0
drivers/ili9341 : Move 'ILI9341_VCOML' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
d6935cd7bb
drivers/ili9341 : Move 'ILI9341_VCOMH' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
7bb83f9e01
drivers/ili9341 : Move 'ILI9341_GVDD' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
benpicco
a80631a297
Merge pull request #15074 from maribu/ptp-clock
...
drivers/periph/ptp_clock
2020-12-03 09:59:07 +01:00
Marian Buschsieweke
7d1edd51f4
drivers/periph: Added PTP clock API
2020-12-02 17:53:00 +01:00
benpicco
665c07eb53
Merge pull request #15120 from benpicco/driver/at86rf215-trim
...
driver/at86rf215: add functions to configure trim & clock output at run-time
2020-12-02 16:53:02 +01:00
Benjamin Valentin
95d082a2be
driver/at86rf215: add functions to set trim & clock output at run-time
...
To calibrate the at86rf215 radio, trim value has to be set at run-time
during board production.
Add two helper functions to control the trim value and clock output register.
2020-12-02 14:59:17 +01:00
Fabian Hüßler
c526a34770
sx127x: make use of netdev_register()
...
Call netdev_register() in sx127x_setup()
and pass the index in auto_init_sx127x()
and semtech_loramac_init()
2020-12-01 16:34:11 +01:00
Fabian Hüßler
8ca2e09d95
drivers/include: add NETDEV_SX127X
2020-12-01 16:34:06 +01:00
Marian Buschsieweke
56cf30172f
Merge pull request #15532 from fabian18/cc110x_netdev_register
...
drivers/cc110x: use netdev_register
2020-12-01 16:17:37 +01:00
Fabian Hüßler
39adf908ce
cc110x: make use of netdev_register()
...
Call netdev_register() in cc110x_setup()
and pass the index in auto_init_cc110x()
2020-12-01 12:11:20 +01:00
Fabian Hüßler
320b1c4206
drivers/include: add NETDEV_CC110X
2020-12-01 12:06:12 +01:00
Benjamin Valentin
eb199d4c78
netdev: move definition of NETDEV_INDEX_ANY to netdev
2020-12-01 11:55:06 +01:00
benpicco
333fce44b4
Merge pull request #14973 from benpicco/driver/at86rf215-batmon
...
drivers/at86rf215: implement battery monitor, add power bus
2020-12-01 11:52:46 +01:00
Benjamin Valentin
a28a60f16c
cpu/stm32: periph_eth: register with netdev
2020-11-29 23:10:37 +01:00
Francisco
14877443f7
Merge pull request #15494 from gdiribarne/bugfix/sfr04-avr-overflow
...
drivers/srf04: fix overflow on AVR
2020-11-26 11:14:15 +01:00
1d5e2e9cd9
all: remove traces of kernel_types.h
...
Automatically removed using:
$ git grep -l kernel_types | xargs sed -i '/^#include .kernel_types/d'
2020-11-25 17:52:34 +01:00
0b801c4de0
all: adapt to moved sched defines
2020-11-23 16:56:34 +01:00
Gilles Diribarne
5a5c8507d4
drivers/sfr04: Use uncrustify
2020-11-22 23:12:40 +01:00
Gilles Diribarne
caa1ad822d
drivers/sfr04: Fixed int overflow for AVR (arduino board)
2020-11-22 23:03:21 +01:00
benpicco
6cf6b47c27
Merge pull request #15445 from btcven/2020_11_05-gp2y10xx
...
drivers: add gp2y10xx dust sensor
2020-11-18 09:56:03 +01:00
Jean Pierre Dudey
e920a2e645
drivers: add gp2y10xx dust sensor
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-11-18 09:13:56 +01:00
Hauke Petersen
c4a8c45a3e
periph/rtt: fix tick conversion macros
2020-11-16 10:00:24 +01:00
Benjamin Valentin
f9650bdbc3
drivers/at86rf215: implement Battery Monitor
2020-11-13 22:59:09 +01:00
benpicco
be9eb22bb8
Merge pull request #15106 from chrysn-pull-requests/saul-rgbleds
...
saul_pwm: auto-init'able RGB LEDs and dimmers
2020-11-13 18:22:30 +01:00
benpicco
d9598a0f54
Merge pull request #15412 from bergzand/pr/flashpage/merge_raw
...
periph_flashpage: Make pagewise API optional
2020-11-12 22:32:21 +01:00
41bbaa7442
flashpage: Make pagewise API optional
...
flashpage currently requires pagewise implementation with an optional
extension for per block writes (flashpage_raw). Most implementations
with flashpage_raw implement the pagewise access via the flashpage_raw
functions. This commit makes the flashpage raw the main access method
and adds an extension feature for the pagewise access.
The functions and defines are renamed to reflect this. The API is also
extended with a dedicated function for erasing a sector.
2020-11-11 22:26:33 +01:00
Hauke Petersen
8a31519558
drivers: add support for ds3231 RTC
2020-11-09 15:18:54 +01:00
Francisco
3e3da1217d
Merge pull request #15249 from aabadie/pr/tools/typo
...
tools/codespell: fix new typos and make it fail when typos are found
2020-11-03 15:01:20 +01:00
benpicco
9681c204d6
Merge pull request #14959 from benpicco/at86rf215-mr-fsk
...
drivers/at86rf215: implement MR-FSK
2020-11-03 11:26:24 +01:00
Benjamin Valentin
6f23263503
drivers/at86rf215: implement MR-FSK
2020-11-03 10:51:21 +01:00
Benjamin Valentin
53ca0dd1d0
drivers/mtd_spi_nor: define WP and HOLD pin
...
Hold and WP are not used by the driver, but if they are connected
to the flash they must be driven HIGH to enable writes and not stop
any flash operation.
2020-11-02 21:17:36 +01:00
benpicco
e77d12da26
Merge pull request #15188 from benpicco/drivers/kw41zrf-register
...
drivers/kw41zrf: register with netdev
2020-10-31 14:30:00 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
cd3ee9e825
drivers/mii: fix typo 'auto-negotation' => 'auto-negotiation'
2020-10-27 10:33:48 +01:00
Benjamin Valentin
fde3026312
drivers/mtd_spi_nor: prevent data corruption on 'sector erase'
...
There is no difference between 4k erase and sector erase.
But sector erase would previously do `.block_erase` which would not
erase a sector (4k) but a whole block (64k).
Fortunately all boards declare `SPI_NOR_F_SECT_4K` and all file systems
don't try to erase anything smaller, so this was never triggered.
Add an `assert(0)` to crash instead of corrupting data.
2020-10-26 13:48:26 +01:00
Benjamin Valentin
0425325260
drivers/mtd_spi_nor: use single transfer to read JEDEC ID
...
Just read the JEDEC ID with a single SPI transfer, there can only
be 10 banks.
This makes adaption to QSPI much simpler because now flash functions
don't call the SPI API directly anymore.
2020-10-26 13:02:09 +01:00
Bas Stottelaar
26835a949f
drivers/*: remove unused assert.h include
2020-10-22 11:29:27 +02:00
chrysn
d196c7c4a6
drivers/saul/auto_init: Add PWM for LEDs
...
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
2020-10-17 11:20:17 +02:00
benpicco
4edf5c7cbd
Merge pull request #15208 from benpicco/ieee802154_submac-etx
...
netdev/ieee802154_submac: add retransmission reporting
2020-10-15 14:31:54 +02:00
Benjamin Valentin
37aad4ef38
netdev/ieee802154_submac: add retransmission reporting
...
If we do software retransmissions, we already keep a count.
Allow to query it with `NETOPT_TX_RETRIES_NEEDED`.
2020-10-15 13:26:42 +02:00
Nishchay-sopho
eb1064eef4
drivers/scd30: Add reset function to Sensirion scd30 sensor
2020-10-14 15:07:01 +02:00
Marian Buschsieweke
6294382627
cpu/stm32: Use mii.h for periph_eth
...
Use shared MII definitions and utilities instead own definitions.
2020-10-12 08:46:20 +02:00
Marian Buschsieweke
33d916b237
drivers/mii: Media-Independent Interface utils
...
Add utilities for working with Ethernet Media-Independent Interface for use by
Ethernet drivers.
2020-10-12 08:46:20 +02:00
Benjamin Valentin
b32bc3dbd1
drivers/kw41zrf: register with netdev
2020-10-08 16:19:23 +02:00
Benjamin Valentin
1afe72a5e5
drivers/enc28j60: register with netdev
2020-10-08 10:36:56 +02:00
benpicco
ab37c9fba1
Merge pull request #14949 from benpicco/drivers/mrf24j40-register
...
drivers/mrf24j40: register with netdev
2020-10-08 10:33:37 +02:00
Francisco
3918d714ce
Merge pull request #13624 from wosym/pr/candev_mcp2515
...
tests/candev: add mcp2515 + driver/mcp2515: add driver
2020-10-08 09:45:40 +02:00
Benjamin Valentin
a1d8c79a98
drivers/mrf24j40: pass long address via pointer
2020-10-07 16:39:39 +02:00
Benjamin Valentin
988ee1648f
drivers/mrf24j40: register with netdev
2020-10-07 16:39:39 +02:00
Marian Buschsieweke
5b9463aca1
drivers/netdev: Clarify documentation
2020-10-06 10:48:06 +02:00
Wouter Symons
757f810118
drivers/mcp2515: complete driver + adapt to 2020 RIOT API
2020-10-03 15:20:42 +02:00
Vincent Dupont
62a9929f9b
mcp2515: add a driver for the mcp2515 SPI CAN controller
...
This driver implements the candev interface
2020-10-03 15:20:42 +02:00
feac7dc978
drivers/pir: fix typo 'whan' -> 'when'
2020-10-02 08:06:16 +02:00
dc8d32d30e
drivers/periph/gpio: fix typo 'occured' -> 'occurred'
2020-10-02 08:05:55 +02:00
9236b6ca5c
drivers/ltc4150: fix typo 'tread' -> 'treat'
2020-10-02 08:05:31 +02:00
59297c3779
drivers/lc709203f: fix typo 'Invlid' -> 'Invalid'
2020-10-02 08:05:00 +02:00
5ef55e37d7
drivers/ina3221: fix typos
...
- 'measurment' -> 'measurement'
- 'enble' -> 'enable'
2020-10-02 08:04:23 +02:00
2f2eeb7a7b
drivers/at: fix typo 'correspondant' -> 'correspondent'
2020-10-02 08:03:10 +02:00
benpicco
6cb8da7813
Merge pull request #14950 from jia200x/pr/ieee802154/submac
...
ieee802154_submac: add initial support for common MAC sub layer
2020-10-01 11:31:52 +02:00
Jose Alamos
4bb77b0b2f
netdev/ieee802154_submac: add compatibility layer
2020-09-30 17:25:31 +02:00
benpicco
b2401eb73b
Merge pull request #14966 from HendrikVE/pr/driver/aip31068
...
driver/aip31068: add new driver
2020-09-30 15:52:52 +02:00
Hendrik van Essen
6778bf4b98
driver/aip31068: add new driver
2020-09-29 14:42:15 +02:00
Martine Lenders
cd8666735e
Merge pull request #15107 from benpicco/boards/samr21-xpro_edbg_eui
...
boards/samr21-xpro: fix reading EUI-64 from EDBG on cold boot
2020-09-29 11:04:04 +02:00
Benjamin Valentin
971c03eeb9
drivers/edbg_eui: add note on edbg startup time
2020-09-28 20:18:43 +02:00
7c029c7f43
Merge pull request #14907 from OTAkeys/pr/adcxx1c_get_alert
...
drivers/adcxx1c: add clear alert function
2020-09-28 13:28:15 +02:00
316871a4fa
Merge pull request #15068 from MrKevinWeiss/pr/dev_enum
...
drivers/dev_enums: Remove unused dev_enums.h
2020-09-25 17:35:21 +02:00
MrKevinWeiss
7893158b5a
drivers/dev_enums: Remove unused dev_enums.h
2020-09-24 09:27:39 +02:00
Viktor Gal
7ea8f738fd
Add support for Adafruit Seesaw Soil moisture sensor ( #14835 )
...
drivers/seesaw_soil: Add support for Adafruit Seesaw Soil moisture sensor
2020-09-23 17:35:33 +02:00
chrysn
9295f69da4
Merge pull request #15062 from kaspar030/fix_efm32_16b_timer_set_absolute
...
cpu/efm32/periph/timer: fix timer_set_absolute() in 16bit case
2020-09-23 11:28:00 +02:00
chrysn
d8d56e5e3a
periph/timer: Document that set_absolute is expected to wrap
...
Most timers are implemented this way already, and keeping (documenting)
it that way allows the generic timer_set implementation to stay as
simple as it is.
2020-09-23 10:59:18 +02:00
MrKevinWeiss
cc1c2ab811
drivers/periph: Remove unused timer enum from dev_enums
2020-09-22 16:26:01 +02:00
José Alamos
9c130cd2fd
Merge pull request #15032 from jia200x/pr/at86rf2xx/fix_overflow
...
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-17 10:32:06 +02:00
Jose Alamos
074dc8d328
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-16 14:47:51 +02:00
Benjamin Valentin
696ddf3dbb
drivers/periph/timer: amend documentation for timer_set_periodic()
...
The function needs the `periph_timer_periodic` feature.
Add a `@note` about that to the documentation.
2020-09-13 19:06:28 +02:00
benpicco
842933855f
Merge pull request #14995 from benpicco/cpu/cc2538-register
...
cc2538_rf: register with netdev
2020-09-11 16:03:08 +02:00
Benjamin Valentin
1811686540
cc2538_rf: register with netdev
2020-09-11 13:33:37 +02:00
Francisco
858533e68e
Merge pull request #14994 from benpicco/nrf802154-register
...
nrf802154: register with netdev
2020-09-11 12:48:40 +02:00
Cenk Gündoğan
0d0bc91553
Merge pull request #14754 from leandrolanzieri/pr/no_archives
...
build system: link object files
2020-09-10 09:36:29 +02:00
Benjamin Valentin
58dc106309
nrf802154: register with netdev
2020-09-10 00:05:25 +02:00
9b9ed236ba
Merge pull request #14916 from MrKevinWeiss/pr/slwstk6220a
...
drivers/periph: Remove UART from device_enums.h
2020-09-09 10:53:27 +02:00
fdaf7fd822
Merge pull request #14596 from benpicco/drivers/at86rf2xx-retries
...
drivers/at86rf2xx: support frame retry reporting on AT86RFR2
2020-09-09 10:27:05 +02:00
MrKevinWeiss
bdeb39576e
drivers/periph: Remove UART from dev_enums.h
2020-09-09 10:25:38 +02:00
Benjamin Valentin
0871b69c84
drivers/at86rf2xx: support frame retry reporting on at86rfr2
...
At86rfr2 doesn't report retries directly, but it can generate a TX start
interrupt for each (re)try, so we can count manually.
2020-09-08 14:48:57 +02:00
Benjamin Valentin
634714ff78
drivers/at86rf215: implement Reduced Power Consumption
...
Reduced Power Consumption is available for MR-O-QPSK and
MR-FSK.
In this mode the receiver will be turned off periodically,
defaulting to a 50% duty cycle.
This reduces power consumption when in IDLE RX by almost 50%
and is therefore enabled by default.
2020-09-07 13:48:47 +02:00
Leandro Lanzieri
16b5fd303b
drivers: add usbdev_mock
2020-09-04 15:01:16 +02:00
Francisco
6f84870c26
Merge pull request #14634 from benpicco/eui_provider
...
net/link_layer: implement EUI provider
2020-09-01 16:26:08 +02:00
benpicco
6f271b7d3e
Merge pull request #14903 from benpicco/drivers/include/periph/rtc-fix
...
drivers/periph_common: RTC: fix doxygen
2020-09-01 15:15:55 +02:00
