Benjamin Valentin
477938e46e
drivers/mrf24j40: add external PA/LNA control on MC/MD/ME devices
...
The MRF24J40MC/MD/ME modules contain an external power amplifier &
low noise amplifier that has to be enabled manually by setting three bits
in the TESTMODE register.
On MRF24J40MC the power amplifier is powered by a separate voltage regualtor
that has to be enabled by setting GPIO3 to HIGH.
During Sleep and CCA the PA should be disabled.
Co-authored-by: Carton <joel.carron@eeproperty.ch>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2019-05-23 11:07:04 +02:00
a7f8182249
drivers: sys: add SAUL support for ds75lx sensor
2019-05-22 16:54:20 +02:00
35a3c4ddfe
drivers/ds75lx: add basic driver
2019-05-22 16:54:19 +02:00
MichelRottleuthner
c754f3c4c7
Merge pull request #11451 from fhessel/pcd8544
...
drivers/pcd8544: Use uint8_t instead of char for byte represenatation
2019-04-30 21:47:50 +02:00
Frank Hessel
70ac451a2b
drivers/sdcard_spi: Use uint8_t for byte values
2019-04-29 19:25:34 +02:00
Frank Hessel
827868a7a0
drivers/pcd8544: replace char by uint8_t for bytes
2019-04-25 23:42:30 +02:00
Philipp Blum
9f2ef5e367
drivers/periph_common/gpio_util: introduce gpio_util_shiftin()
2019-04-18 07:09:32 +02:00
c1547efb3a
Merge pull request #11316 from fjmolinas/pr_sx127x_switch
...
drivers/sx127x: add support for rx and tx switch pin
2019-04-10 18:40:37 +02:00
francisco
c62d9feff7
drivers/sx127x: add support for rx and tx switch pin
2019-04-10 08:18:01 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Dylan Laduranty
a81dbf0037
Merge pull request #11152 from ibr-cm/petersen/l3g4200d-fix-pr
...
l3g4200d: Fixes conversion bug
2019-04-05 15:49:13 +02:00
Vincent Dupont
74ddf56171
tests/conn_can: build stm32 CAN drivers
...
Build can_stm32 module on boards which have a stm32 CAN controller.
2019-04-03 11:12:46 +02:00
Torben Petersen
506e208ffd
drivers/l3g4200d: fixes driver conversion
2019-03-30 10:32:43 +01:00
Vincent Dupont
ae95137f95
can stm32: add a driver for STM32 bxCAN peripheral
...
This driver is compliant with the candev interface. It has been tested
with STM32F0 and STM32F2 and STM32F413 ONLY at this time but should be
compliant with other STM32Fx devices
2019-03-29 12:03:43 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
Dylan Laduranty
ccf12c57a8
Merge pull request #10884 from fedepell/sam_rwee_support
...
sam0 flashpage RWWEE flash support
2019-03-28 11:00:25 +01:00
Martine Lenders
664763bb29
netdev: add doc group for network device types
2019-03-26 21:37:20 +01:00
Kevin "Bear Puncher" Weiss
268d3e926c
Merge pull request #10826 from ranbe1/at_driver_uart_initialize_status
...
drivers/at: make at_dev_init() return uart initialize status
2019-03-26 14:07:05 +01:00
c697a3bfd8
usbdev: extend events with suspend/resume
2019-03-25 21:03:21 +01:00
Federico Pellegrin
5faafac092
sam0 flashpage RWWEE flash support
2019-03-21 04:27:41 +01:00
7c285eb186
drivers/lpsxxx: add support for lps22hb
2019-03-20 14:43:37 +01:00
1f4dee90a1
drivers/lpsxxx: unify lps331ap and lps25h drivers
2019-03-20 14:43:36 +01:00
4d352fc93f
usbdev: Extend with low level initialization functions
2019-03-20 09:12:24 +01:00
Martine Lenders
51626a48d4
netdev: document valid values for iolist in send()
2019-03-15 11:34:19 +01:00
71204d1d70
Merge pull request #9830 from bergzand/pr/usb/usbdev
...
usbdev: Introducing a generic USB device driver API
2019-03-14 22:48:47 +01:00
9af6c69a93
usbdev: Introduce a common API for USB peripherals
...
This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
2019-03-14 21:44:56 +01:00
Leandro Lanzieri
e98de1a91a
drivers/ds3234: Fix doxygen group
2019-03-14 14:32:28 +01:00
Leandro Lanzieri
94a10e9e10
Merge pull request #11132 from MichelRottleuthner/pr_sx127x_add_gpio_pull_config
...
drivers/sx127x: add gpio pull config define for DIO pins
2019-03-14 14:05:56 +01:00
Gilles DOFFE
dd6a37517b
drivers: add motor_driver API
...
This driver API aims to control DC motors.
It handles :
* motor controller associated to a PWM device
* several motors by controller
* motor rotation direction
* brake capability
* enable/disable motor individually
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Jose Alamos
893707a590
netdev/lora: add netdev_lora_rx_info structure
2019-03-08 17:45:08 +01:00
Michel Rottleuthner
389d258627
drivers/sx127x: add gpio pull config define for DIO pins
2019-03-07 16:09:38 +01:00
Semjon Kerner
c2a40be458
drivers/netdev_ieee802154: add mac header filter
2019-03-04 13:21:43 +01:00
Martine Lenders
2d6a557d83
netdev: introduce test device type
2019-02-26 16:46:21 +01:00
Joakim Nohlgård
a6f430b4b5
drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC
...
This driver currently only supports the SPI connected DS3234, and only
for initializing 1 Hz square wave output on the SQW pin, nothing else.
2019-02-19 11:57:40 +01:00
Yegor Yefremov
0dedf979f3
drivers/sx127x: fix dead links
...
URLs of the datasheets have been changed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-15 21:16:42 +01:00
Leandro Lanzieri
85e75cf9f8
drivers/saul: Add capacitance and voltage types
2019-02-15 13:37:45 +01:00
Leandro Lanzieri
50dc5b7528
drivers: Add driver for AD7746 capacitance sensor
2019-02-15 13:31:18 +01:00
Yegor Yefremov
b8ff48cce4
periph/uart: improve documentation
...
Change description to reflect the configurability of the serial
interface.
Also, fix the uart_mode parameter description as the UART will be
configured and not initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-11 09:35:23 +01:00
Yegor Yefremov
6bf185855b
drivers/bmx280: fix dead links
...
URLs have been changed to:
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001.pdf
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280-DS002.pdf )
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-08 09:01:20 +01:00
Kees Bakker
50ec5130d6
drivers: add support for SHT2x (I2C temp and humidity sensor)
...
Several parts were inspired by a driver written by:
George Psimenos (gp7g14@soton.ac.uk )
Steffen Robertz (steffen.robertz@rwth-aachen.de )
2019-02-05 22:17:30 +01:00
Silke Hofstra
3cf3742f8c
hdc1000: fix documentation for HDC1000_PARAM_RENEW_INTERVAL
...
The documentation refers to the `HDC1000_PARAM_RENEW_INTERVAL` as
`HDC1000_RENEW_INTERVAL`.
2019-02-04 11:28:31 +01:00
smlng
03698502e3
netstats_l2: remove obsolete struct from xbee_t
2019-02-01 11:25:27 +02:00
smlng
b8d9610316
netstats_l2: remove obsolete struct from netdev_t
2019-02-01 11:25:27 +02:00
Kevin "Bear Puncher" Weiss
1d693403b6
Merge pull request #10743 from yegorich/uart-enhanced-settings
...
RFC: UART enhanced settings
2019-01-31 17:11:28 +01:00
Yegor Yefremov
ddf19783d7
periph/uart: add support for enhanced serial settings
...
As suggested in PR#5899 add a routine uart_mode() that will
setup data bits, stop bits and parity at runtime.
uart.h provides a set of enums defining these settings and each
platform will override them to specify values corresponding to
its configuration registers.
The idea behind the enums is to specify default settings i.e. 8N1
through the 0 value item. Invoking uart_mode(uart, 0, 0, 0) will
setup 8N1 mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:11 +01:00
Michel Rottleuthner
6cffa07ed1
drivers/saul: add sensor type for particulate matter
2019-01-30 13:15:17 +01:00
Michel Rottleuthner
f5dc2524d0
drivers: add driver for SDS011 active laser dust sensor
2019-01-30 13:15:17 +01:00
Marian Buschsieweke
db0c66e07f
drivers/ltc4150: Allow tracking last minute charge
...
Implemented an example `ltc4150_recorder_t` implementation as a proof of concept
for the recorder API.
2019-01-28 13:45:45 +01:00
Marian Buschsieweke
c00886ac39
drivers/ltc4150: (Re-)implemented LTC4150 driver
...
The LTC4150 is a coulomb counter (a.k.a. battery sensor or bidirectional
current sensor) that is used in the MSBA2 board and available for little money
as easy to use break out board.
2019-01-28 13:44:16 +01:00
Marian Buschsieweke
ac98c98a0d
drivers/saul: Added coulomb counter & ammeter
2019-01-28 13:33:18 +01:00
