Firas Hamdi
491a1cdf2b
tests/drivers/candev: add test commands
2024-03-26 15:17:48 +01:00
MrKevinWeiss
7a68fb0d5e
*Kconfig*: Remove dep-only Kconfig files
2024-03-26 14:54:22 +01:00
MrKevinWeiss
0a9c51fdf9
*.config: Modify all .config kconfig files
2024-03-26 14:53:40 +01:00
MrKevinWeiss
0f2b71c60e
*Makefile.features: Remove TEST_KCONFIG includes
2024-03-26 14:53:39 +01:00
MrKevinWeiss
db965c9491
*app.config.test*: Remove kconfig dep files
2024-03-26 14:53:35 +01:00
Marian Buschsieweke
a9d052bc32
Merge pull request #20363 from mguetschow/malloc-monitor
...
Monitoring malloc usage
2024-03-26 10:58:33 +00:00
Mikolai Gütschow
f31f82042a
sys: add malloc_monitor, deprecate malloc_tracing
2024-03-26 10:00:24 +01:00
Marian Buschsieweke
1b64abf7dc
Merge pull request #20485 from dylad/pr/treewide/remove_deprecated_shell_commands
...
treewide: remove deprecated shell_commands module
2024-03-26 08:39:26 +00:00
Karl Fessel
e6f03db4e2
Merge pull request #20423 from derMihai/mir/at_urc
...
drivers/at: fix URC handling and add better testing
2024-03-25 14:33:46 +00:00
Teufelchen
4982049904
Merge pull request #20484 from mguetschow/hashes-sha512-trunc
...
sys/hashes: support for SHA-{384,512/{224,256}}
2024-03-25 11:48:22 +00:00
Mikolai Gütschow
9300007cf1
sys/hashes: support for SHA-{384,512/{224,256}}
...
pkg/esp32_sdk: rename sha384_init to avoid name clash
2024-03-25 12:35:10 +01:00
Marian Buschsieweke
d76fc8d2ed
Merge pull request #20500 from jkarinkl/supported_boards_change_wiki_link
...
tests/unittests/README: link to Supported Boards updated (wiki -> site)
2024-03-22 17:22:16 +00:00
Karin Lammers
623f78d0d6
tests/unittests/README: link to wiki updated
...
This commit changes the link about supported boards in the README from the wiki page to the RIOT-OS website.
Since the wiki is not up to date.
See also [this pull request](https://github.com/RIOT-OS/riot-os.org/pull/109/files ) that fixed the same link on the website.
2024-03-22 16:09:45 +01:00
MrKevinWeiss
575ab684fe
sys/net/coap: cast in non-config define
...
If we try to set the compile-time config we need to always remember casting, instead, just cast in the places that are not exposed to users
2024-03-21 14:26:45 +01:00
Mihai Renea
63e057cb50
drivers/at: Fix sync URC handling. at_send_cmd_get_lines() keeps EOL.
2024-03-20 14:32:09 +01:00
chrysn
a0ee4def10
rust: Selectively update riot-wrappers
...
Changes pulled by this are:
* optimizations around panicking <https://github.com/RIOT-OS/rust-riot-wrappers/pull/82 >
* administrative changes (CI fixes)
2024-03-20 16:00:08 +10:00
chrysn
7e8031fd80
rust: Update non-RIOT dependencies
...
All changes appear to be minor; some crates that were previously part of
the build dependencies twice can now be shared between build
dependencies.
2024-03-20 16:00:02 +10:00
chrysn
e8c28ef536
rust: Selectively update riot-sys
...
Changes pulled by this are:
* add hashes to riot-sys headers <https://github.com/RIOT-OS/rust-riot-sys/pull/43 >
* administrative changes (riot-sys 0.7.11, CI fixes)
2024-03-20 15:59:57 +10:00
Dylan Laduranty
f78a41f1b3
treewide: replace shell_commands module in documentation
...
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2024-03-19 15:12:02 +01:00
Dylan Laduranty
c5710392b2
Merge pull request #20464 from Enoch247/add-to-cib
...
core/lib/cib: add new functionality
2024-03-19 08:47:05 +00:00
Dylan Laduranty
9e2a2e4765
Merge pull request #20471 from dylad/pr/treewide/remove_deprecation
...
treewide: remove deprecated modules
2024-03-19 08:12:29 +00:00
Dylan Laduranty
26058cf14e
treewide: remove deprecated nice module
...
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2024-03-18 21:31:03 +01:00
Joshua DeWeese
b6481654ba
core/lib/cib: add several new peek functions
...
This patch adds calls to be able to peek at items other than just the
oldest item in a cib based FIFO. It also adds an "unsafe" peek to match
the existing "unsafe" put and get functions.
2024-03-18 10:14:34 -04:00
Teufelchen
5f0dc5921c
Merge pull request #20281 from keestux/fix/refactor-tests-periph-uart
...
Refactor tests periph uart
2024-03-18 12:42:23 +00:00
Lena Boeckmann
9c24e891d7
tests/sys/psa_crypto_se_mac: Add arduino-leonardo to blacklist
2024-03-13 11:58:52 +01:00
Lena Boeckmann
d733162d5a
tests/sys/psa_crypto_se_ecdsa: add arduino-leonardo to blacklist
2024-03-13 11:50:31 +01:00
Teufelchen1
79a77dbfa0
tests: Add cases to the scn_u32_hex unittest
2024-03-12 18:28:20 +01:00
Joshua DeWeese
45752a3002
core/lib/cib: remove superfluous init
...
This patch removes a superfluous init of the cib. The struct is already
initialized by the test fixture's setup function.
2024-03-12 12:54:46 -04:00
Joshua DeWeese
45f865965f
core/lib/cib: remove magic number from unit test
2024-03-12 12:54:46 -04:00
Teufelchen1
4917b59005
tests: Cover API of scn_u32_hex in the unittest
2024-03-12 11:46:07 +01:00
Fabian Hüßler
bb9ca2ef86
tests/net/gnrc_ipv6_nib: add tests for router and prefix timeout
2024-03-09 11:02:12 +01:00
Benjamin Valentin
b274e8a117
tests/unittests: report results to the environment on native
2024-03-04 14:43:31 +01:00
Benjamin Valentin
da0298992e
tests: automatically exit native when the test has finished
2024-03-04 14:13:47 +01:00
Benjamin Valentin
634b186d1d
tests/mtd_flashpage: add test for AUX slot
2024-02-28 13:17:59 +01:00
Marian Buschsieweke
e4a64f2ada
Merge pull request #20425 from benpicco/tests/pkg/flashdb_fal_cfg
...
tests/pkg/flashdb_fal_cfg: abort test if no MTD device is configured
2024-02-23 14:06:38 +00:00
Benjamin Valentin
82aac9c761
tests/pkg/flashdb_fal_cfg: abort test if no MTD device is configured
2024-02-23 13:17:12 +01:00
chrysn
6714a77026
Merge pull request #20339 from chrysn-pull-requests/native64-rust
...
cpu/native: Enable Rust on 64bit
2024-02-23 10:41:47 +00:00
chrysn
198bd67bc3
rust: Selectively update riot-sys and -wrappers
...
This pulls in <https://github.com/RIOT-OS/rust-riot-sys/pull/40 > and
<https://github.com/RIOT-OS/rust-riot-wrappers/pull/80 >.
2024-02-23 11:23:04 +01:00
benpicco
0b385c6c0d
Merge pull request #20418 from xnumad/6ln-onlink-pfx
...
gnrc_ipv6_nib: Ignore PIO with on-link flag
2024-02-22 18:41:22 +00:00
xnumad
23d3ccde6b
gnrc_ipv6_nib: Ignore PIO with on-link flag
2024-02-22 17:52:17 +01:00
Mihai Renea
c58b71b899
drivers/at: parse +CME/+CMS responses and save error value
2024-02-22 12:21:25 +01:00
Marian Buschsieweke
34de5286b7
Merge pull request #20401 from maribu/tests/sys/posix_semaphore/disable_native_on_ci
...
examples, tests: disable native and native64 for more flaky tests
2024-02-20 12:21:25 +00:00
Marian Buschsieweke
463eef1c55
tests/sys/posix_semaphore: disable native,native64 on CI
...
The CI tests may fail under load with:
first: waited too long 1001711 usec => FAILED
2024-02-20 12:30:23 +01:00
8cca5bec30
Merge pull request #20382 from maribu/ci/disable_flaky_tests
...
tests: disable flaky tests on `native` in the CI
2024-02-19 14:10:55 +00:00
chrysn
756a384442
makefiles, treewide: Remove MCU variable
2024-02-18 20:46:09 +01:00
Benjamin Valentin
7e48606399
tests/pkg/edhoc_c: bump CoAP thread stack size
...
The CoAP thread stack size needs to be the same as the main
thread stack size to accommodate the EDHOC stack requirements.
This was lost when moving to the common CoAP server code.
2024-02-14 11:20:56 +01:00
Marian Buschsieweke
d61a468a3e
Merge pull request #20378 from benpicco/use-nanocoap_server_auto_init
...
make use of nanocoap_server_auto_init
2024-02-13 18:41:11 +00:00
benpicco
d08fb3f144
Merge pull request #20043 from bergzand/pr/nanocoap_cache_options
...
nanocoap/cache: Extend with option-only cache keygen
2024-02-13 15:23:59 +00:00
Marian Buschsieweke
4d74b40ace
tests/net/gnrc_rpl: Try to disable the test on native
...
The test is already marked as disabled, but executed anyway. Hopefully
this does the trick.
2024-02-13 09:00:18 +01:00
Marian Buschsieweke
a3e05c578b
tests/sys/ztimer_msg: Disable test on native in CI
...
This tests fails sporadically on unrelated PRs, wasting days of CPU
time in the CI. So, let's disable this test for now.
2024-02-13 08:59:22 +01:00
2c9bf3fbc2
unittests: Extend nanocoap_cache with option-only
2024-02-12 21:20:39 +01:00
Marian Buschsieweke
dd0de1ba25
examples,tests: update Makefile.ci
...
With the new RISC-V toolchain, some binaries grew larger, most smaller.
2024-02-12 20:40:31 +01:00
Benjamin Valentin
49f51e4706
tests/pkg/edhoc_c: make use of nanocoap_server_auto_init
2024-02-12 18:23:54 +01:00
Benjamin Valentin
d02d194c85
tests/riotboot_flashwrite: make use of nanocoap_server_auto_init
2024-02-12 18:23:54 +01:00
benpicco
597b2ad907
Merge pull request #20374 from benpicco/coap_resources_numof-remove
...
always use nanocoap_resources instead of manually assembling coap_resources[]
2024-02-12 16:00:34 +00:00
Marian Buschsieweke
1fcf778526
tests/periph/spi_dma: fix Makefile.ci
...
The `Makefile.ci` was intended to be read and generated by command
line utilities and the contents should look exactly like this:
```
BOARD_INSUFFICIENT_MEMORY += \
board_a \
board_b \
... \
#
```
No fancy schmancy, no `include`, no nothing. This fixes the format.
2024-02-12 15:57:43 +01:00
Benjamin Valentin
2dd6a65ea9
tests/riotboot_flashwrite: make use of nanocoap_resources
2024-02-12 15:43:23 +01:00
Benjamin Valentin
67411db26f
tests/pkg: make use of nanocoap_resources
2024-02-12 15:40:21 +01:00
benpicco
270aa7012f
Merge pull request #20221 from fabian18/pr/flashdb_cfg_enhancement
...
pkg/flashdb: enhance FAL config
2024-02-10 22:33:03 +00:00
Fabian Hüßler
bf4bfdfbe9
tests/pkg/flashdb_fal_cfg: add Makefile.ci
2024-02-10 23:20:24 +01:00
Fabian Hüßler
b671dd4d98
tests/pkg/flashdb_mtd: add Makefile.ci
2024-02-10 23:20:24 +01:00
benpicco
6c96952a9f
Merge pull request #20358 from kaspar030/disable_flakey_native_tests
...
ci: disable some more flakey native tests
2024-02-09 16:12:55 +00:00
mguetschow
de1efc6772
Merge pull request #20344 from Teufelchen1/chore/fmt_test_3
...
tests: Add NULL pointer argument test for fmt_lpad/to_lower/str
2024-02-09 10:41:17 +00:00
Teufelchen1
dbcfa1bdc8
tests: Add NULL pointer argument test for fmt_lpad/to_lower/str
2024-02-09 11:03:05 +01:00
Marian Buschsieweke
2dbc80fe59
Merge pull request #20352 from Enoch247/add-limit-macro
...
macros/utils: add LIMIT() and ABS() macros
2024-02-09 06:06:48 +00:00
Fabian Hüßler
057695bdde
tests/pkg/flashdb: add test for FAL config initialization
2024-02-08 20:48:14 +01:00
Joshua DeWeese
fa7a577728
tests/unittests: add test for ABS() macro
2024-02-08 10:56:11 -05:00
Joshua DeWeese
b1cb2435d8
tests/unittests: add unit test for LIMIT() macro
2024-02-08 10:56:00 -05:00
Joshua DeWeese
8e3bbca8b5
tests/unittests: add tests for MAX()/MIN() macros
2024-02-08 10:55:37 -05:00
Joshua DeWeese
c3a4beb200
treewide: make use of new IPv4 static init macro
...
This commit makes use of the newly added static initializer for IPv4
addresses.
2024-02-08 10:14:24 -05:00
06e359ed38
tests/sys/ztimer_underflow: disable CI test on native(64)
2024-02-07 23:12:16 +01:00
67a14a306c
tests/sys/xtimer_hang: disable CI test on native(64)
2024-02-07 23:12:16 +01:00
b4e9cef7cc
tests/sys/evtimer_underflow: disable CI test on native(64)
2024-02-07 23:12:16 +01:00
5db8682c7c
tests/core/thread_flags: disable CI test on native(64)
2024-02-07 23:12:16 +01:00
c12283edbc
tests/bench/xtimer_load: disable CI test on native(64)
2024-02-07 23:12:16 +01:00
Benjamin Valentin
23c8336485
tests/net/gcoap_fileserver: add atmega1284p to Makefile.ci
2024-02-07 18:44:36 +01:00
benpicco
4d9e8a8dde
Merge pull request #20335 from fzi-haxel/pr/native64-board
...
native64: Separate board for 64-bit native
2024-02-05 22:58:02 +00:00
Frederik Haxel
5ed0bafc92
examples, tests: Changes for the native64 board
...
- Adapted build system and test checks for the native boards to include native64
- Added `native64` to the same tests as `native`
2024-02-05 22:02:14 +01:00
Marian Buschsieweke
8aab69e93d
tests/periph/gpio_ll: Test gpio_ll_switch_dir
2024-02-05 10:56:16 +01:00
Marian Buschsieweke
8bf61336a2
Merge pull request #20290 from maribu/drivers/periph/gpio_ll/features
...
drivers/periph_gpio_ll: Fix GPIO_DISCONNECT handling and add compile time feature checks
2024-02-05 07:30:54 +00:00
Benjamin Valentin
85cfcafdf6
boards/weact-g030f6: add new board
2024-02-05 00:45:42 +01:00
benpicco
22dbbf4a07
Merge pull request #20319 from chrysn-pull-requests/rust-simplifications
...
makefiles/cargo: Remove CARGO_CHANNEL and other simplifications
2024-02-02 08:07:02 +00:00
Marian Buschsieweke
3b3da09ec6
Merge pull request #20313 from maribu/sys/byteorder/cleanup-implementation
...
sys/byteorder: clean up implementation
2024-02-02 05:38:33 +00:00
chrysn
16153d73cc
rust: Selectively update riot-wrappers and -sys
...
This pulls in embedded-nal 0.7 implementations, and (on both crates)
alterations that decouple riot-wrappers from riot-sys and simplify build
system integration, and do away with the need for passing
RIOT_USEMODULE.
2024-02-01 13:53:42 +01:00
e48cbb2cd8
Merge pull request #20324 from maribu/tests/sys/ztimer_overhead
...
tests/sys/timer_overhead: disable test on native in CI
2024-02-01 12:09:43 +00:00
Kevin "Tristate Tom" Weiss
e6844f8d28
Merge pull request #20325 from miri64/tests/enh/lwip-radio-settings
...
tests/pkg/lwip: include default-radio-settings.inc.mk
2024-02-01 09:51:39 +00:00
benpicco
d00fdcb301
Merge pull request #20030 from benpicco/nanocoap_fileserver
...
gcoap_fileserver: rename to nanocoap_fileserver
2024-02-01 09:08:49 +00:00
Marian Buschsieweke
01aa5d8167
tests/sys/timer_overhead: disable test on native in CI
2024-02-01 09:55:55 +01:00
Martine Lenders
fb9b6b9cdc
tests/pkg/lwip: include default-radio-settings.inc.mk
2024-02-01 09:52:22 +01:00
benpicco
4ea27d4c13
Merge pull request #20300 from jparker324/stm32c0_and_nucleo_c031c6
...
cpu/stm32: add support for STM32C0 and NUCLEO-C031C6
2024-01-31 15:09:25 +00:00
Marian Buschsieweke
e5f69206ad
sys/libc/endian.h: fix magic constants
...
The constants BIG_ENDIAN etc. were not consistently defined. This
bug was not caught by the unit tests, as the preprocessor would
treat undefined macros as being `0` in numeric comparisons, hence
the following test did select the correct implementation:
```C
#if BYTE_ORDER == LITTLE_ENDIAN
/* correct implementation for all currently supported boards */
#endif
```
This adds now an explicit test to the unit tests to ensure that the
magic numbers are consistently the correct values. Hence, this bug
should no longer be able to sneak in.
Co-authored-by: Teufelchen <9516484+Teufelchen1@users.noreply.github.com>
2024-01-31 14:46:24 +01:00
Benjamin Valentin
a67f7782ad
tests: add nucleo-c031c6 to Makefile.ci
2024-01-31 13:11:05 +01:00
chrysn
6724884b93
makefiles/rust: Remove CARGO_CHANNEL special casing
...
Back when specific control of the Rust version used with RIOT was
needed, CARGO_CHANNEL was added to explicitly set the Rust version with
consideration for CI special cases.
Rust's mechansims of selecting a toolchain can be used instead now.
2024-01-31 12:25:09 +01:00
Martine Lenders
34fcffe37b
Merge pull request #20170 from miquel-b/lsm6dsxx
...
drivers/lsm6dsxx: refactoring Lsm6dsl into common driver Lsm6dsxx
2024-01-30 19:07:04 +00:00
Benjamin Valentin
c5ac574236
tests/net/gcoap_fileserver: gcoap_fileserver -> nanocoap_fileserver
2024-01-30 16:59:00 +01:00
Jason Parker
a2f4a13beb
boards/nucleo-c031c6 initial add
2024-01-30 10:11:57 -05:00
Marian Buschsieweke
e085ad02af
Merge pull request #20310 from maribu/libc/endian
...
sys/libc: add endian.h
2024-01-30 11:48:45 +00:00
Marian Buschsieweke
6615f47b90
tests/unittests: Add tests for endian.h
2024-01-30 12:24:12 +01:00
Frederik Haxel
c4a8b94eab
lua: Increased LUA_MEM_SIZE for 64 bit
2024-01-30 09:31:00 +01:00
Frederik Haxel
7a1c099e7b
tests: 64 bit compatibility
...
Fixed compilation errors. Mostly DEBUG/printf formatting and void pointer casting.
Other changes are:
* net/gnrc_sixlowpan_frag_*: Generalized packet size calculation
* cpu/native_backtrace: Reduced required backtrace size to 3 for 64-bit
* periph/flashpage: Simplified test
* unittests/tests-pktbuf: Generalized alignment
* sys/architecture: Extended test for 64-bit
2024-01-30 09:31:00 +01:00
chrysn
55cbb7bdfa
Merge pull request #20303 from chrysn-pull-requests/rust-updates
...
treewide: Rust updates
2024-01-29 19:54:32 +00:00
chrysn
002cd42e26
treewide: cargo update
2024-01-27 09:41:26 +01:00
MrKevinWeiss
780bb5d500
tests/drivers/saul_drivers: Specify lsm6dsl
2024-01-25 09:18:10 +01:00
Miquel-HAW
71169638ca
drivers/lsm6dsxx: Implement common code
2024-01-24 09:57:04 +01:00
Marian Buschsieweke
447493e719
tests/periph/gpio_ll: test for features matching
...
Test that features implemented match the features claimed to be
supported.
2024-01-23 15:03:34 +01:00
Marian Buschsieweke
a1bb536dbd
tests/periph/gpio_ll: structure code a bit
...
When it is difficult to navigate a function, it is overdue to split
it up :D
Also, no need to test for feature `gpio_ll_irq` in `test_irq()` *and*
before calling `test_irq()`.
2024-01-23 15:03:34 +01:00
mguetschow
50cf7b77cd
Merge pull request #20272 from Teufelchen1/chore/fmt_test_2
...
tests: Slightly increase coverage of fmt unittests
2024-01-23 12:06:48 +00:00
Teufelchen1
7c39b48847
tests: Slightly increase coverage of fmt unittests
2024-01-23 10:30:49 +01:00
Marian Buschsieweke
63ec7fc7b5
Merge pull request #19835 from maribu/msp430
...
cpu/msp430: rework MSP430 x1xx periph drivers
2024-01-22 18:41:23 +00:00
Marian Buschsieweke
675dcc381c
cpu/msp430: rework MSP430 x1xx periph drivers
...
- Move common code for USART (shared SPI / UART peripheral) to its
own file and allow sharing the USART peripheral to provide both
UART and SPI in round-robin fashion.
- Configure both UART and SPI bus via a `struct` in the board's
`periph_conf.h`
- this allows allocating the two UARTs as needed by the use case
- since both USARTs signals have a fixed connection to a single
GPIO, most configuration is moved to the CPU
- the board now only needs to decide which bus is provided by
which USART
Note: Sharing an USART used as UART requires cooperation from the app:
- If the UART is used in TX-only mode (no RX callback), the driver
will release the USART while not sending
- If the UART is used to also receive, the application needs to power
the UART down while not expecting something to send. An
`spi_acquire()` will be blocked while the UART is powered up.
2024-01-22 16:59:23 +01:00
Marian Buschsieweke
3159578cbe
Merge pull request #20189 from maribu/cpu/sam0_common/periph_gpio_ll
...
cpu/sam0_common: implement periph_gpio_ll and periph_gpio_ll_irq
2024-01-22 15:39:26 +00:00
Marian Buschsieweke
00cb9668ae
drivers/periph_gpio_ll: Improve documentation
...
The documentation on the state `GPIO_DISCONNECT` was a bit vague. The
API doc said it should disconnect the GPIO from all peripherals, the
test also tested them for being electrically disconnected.
The documentation in both the test and the API is extended to point out
that a GPIO indeed SHOULD be in high impedance state, but that user
MUST NOT expect that this requested is honored by every implementation
and for every GPIO pin.
In the test it is also pointed out that failing the test for a GPIO
in the `GPIO_DISCONNECT` state being electrically disconnected is for
some pins expected, and that the test should be just run again with
different GPIOs. The test intentionally tests for a feature not provided
by every GPIO pin rather than warning on a failure: The effort to just
flash and run the test again with different GPIOs is relatively low, but
it does confirm correct behavior of the API.
2024-01-22 10:28:35 +01:00
Marian Buschsieweke
891c627c48
tests/periph/gpio_ll: make test more robust
...
When using level triggered IRQs, a new IRQ flag may already have been
set while the IRQ callback is executed. Hence, we cannot just toggle
the output, but rather should drive it low/high for a level trigger on
high/low.
Also test `gpio_ll_query_conf()` for the disconnected state as well.
2024-01-21 18:27:35 +01:00
Marian Buschsieweke
922276296e
drivers/periph/gpio_ll: pass gpio_conf_t by value
...
Now that `gpio_conf_t` is on all implemented platforms no larger than
a register, we can more efficiently pass it by value rather than via
pointer.
2024-01-21 09:19:08 +01:00
Marian Buschsieweke
718f277642
tests/periph/gpio_ll: optimize RAM usage on AVR
2024-01-21 08:38:48 +01:00
Marian Buschsieweke
84800fdb5d
tests/periph/gpio_ll: Use better default pin config
...
The default pin config is only a place holder anyway. But if it is
invalid at least on AVR most of the firmware is considered unreachable.
This updates the default GPIO config to something that should look
plausible to the compiler for all MCUs supporting GPIO LL, so that
ROM and RAM size in the CI start making sense.
2024-01-21 08:38:47 +01:00
Marian Buschsieweke
2ee949e676
tests/periph/gpio_ll: fix output on LOW_ROM_BOARDS
...
Printing the newline after the state was printed is not optional.
This also moves the call to `gpio_ll_print_conf()` and `puts("")` to
a static function to safe enough ROM so that this still can be flashed
on `nucleo-l011k4`.
2024-01-21 08:38:47 +01:00
Marian Buschsieweke
2a00ec13e5
drivers/periph/gpio_ll: shrink gpio_conf_t
...
This commit optimizes the `gpio_conf_t` type in the following
regards:
- The "base" `gpio_conf_t` is stripped from members that only some
platforms support, e.g. drive strength, slew rate, and disabling of
the Schmitt Trigger are no longer universally available but
platform-specific extensions
- The `gpio_conf_t` is now crammed into a bit-field that is 8 bit or
16 bit wide. This allows for storing lots of them e.g. in
`driver_foo_params_t` or `uart_conf_t` etc.
- A `union` of the `struct` with bit-field members and a `bits` is used
to allow accessing all bits in a simple C statement and to ensure
alignment for efficient handling of the type
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
2024-01-21 08:38:40 +01:00
Kees Bakker
790bd989f7
tests/periph/uart: redo implementation of changing eol
2024-01-20 21:48:19 +01:00
Kees Bakker
e95211eb14
tests/periph/uart: print incoming CR as \r
...
Also the LF is display inside the [...].
Now it is more obvious what characters came in on the RX port of the UART.
Here is an example:
2024-01-20 20:57:41,368 # send 1 ati
2024-01-20 20:57:41,368 # UART_DEV(1) TX: ati
> 2024-01-20 20:57:41,393 # Success: UART_DEV(1) RX: [ati\r\r\n]
2024-01-20 20:57:41,398 # Success: UART_DEV(1) RX: [SARA-N310-00X-00\r\n]
2024-01-20 20:57:41,399 # Success: UART_DEV(1) RX: [\r\n]
2024-01-20 20:57:41,399 # Success: UART_DEV(1) RX: [OK\r\n]
2024-01-20 21:43:46 +01:00
Marian Buschsieweke
504c169346
Merge pull request #20270 from maribu/boards/gd32vf103c-start
...
boards/gd32vf103c-start: new board
2024-01-20 16:11:31 +00:00
Marian Buschsieweke
66abbd22d6
examples,tests: add gd32vr103c-start to Makefile.ci
2024-01-20 17:00:04 +01:00
benpicco
8dbe2ef7e4
Merge pull request #20273 from benpicco/coap_find_uri_query
...
nanocoap: implement coap_find_uri_query()
2024-01-20 11:27:15 +00:00
Benjamin Valentin
f9d5328242
tests: don't explicitly set RIOT_TERMINAL=native
2024-01-19 18:11:09 +01:00
Benjamin Valentin
4c7fc012c5
tests/unittests: nanocoap: add test for coap_find_uri_query()
2024-01-19 10:53:03 +01:00
Miquel-HAW
c79631c6a5
drivers/lsm6dsxx: Replace all lsm6dsl with lsm6dsxx in the files
2024-01-18 14:20:56 +01:00
Miquel-HAW
ce987ccddd
drivers/lsm6dsxx: dir and file renaming
2024-01-18 14:20:56 +01:00
Marian Buschsieweke
f9aab53e16
tests/periph/uart_locate_pins: new test/utility app
...
This application uses `soft_uart` to bit-bang the name of a number of
configured GPIO pins via said pins at 9600 Bd. This way attaching an
USB UART bridge to one pin at a time easily reveals which MCU GPIO
pin a given pin on a board corresponds to. This is useful when no
schematic and no silkscreen labeling is available, or when the
information is misleading or outright incorrect (looking at the
E180-ZG120B-TB).
2024-01-18 10:42:13 +01:00
Frederik Haxel
64c551a714
unittests/tests-fib: Fix array size types
...
Reverts the type changes for the array size variables, as `size_t` is needed
in the function calls `fib_get_next_hop` and `fib_get_destination_set`.
Fixes 475a55136a
2024-01-15 11:26:36 +01:00
Frederik Haxel
a6a6e31699
tests/unittests/tests-uri_parser: Added PRIuSIZE
2024-01-12 17:17:33 +01:00
benpicco
714958ad3c
Merge pull request #20241 from benpicco/busy_wait
...
sys/busy_wait: add busy wait helper
2024-01-11 12:19:31 +00:00
Benjamin Valentin
9cf1c47e86
tests/sys/busy_wait: add test for busy wait
2024-01-11 13:02:56 +01:00
benpicco
bbf5e23cf9
Merge pull request #19786 from gschorcht/cpu/esp32/periph/sdmmc
...
cpu/esp32/periph: add low-level SDMMC peripheral driver for ESP32 and ESP32-S3
2024-01-07 16:51:16 +00:00
Gunar Schorcht
60ab86b273
tests/pkg/fatfs_vfs: add SDMMC support
2024-01-07 17:02:10 +01:00
Kevin "Tristate Tom" Weiss
32af5758ee
Merge pull request #20229 from benpicco/tests/build_system-drop_kconfig
...
tests/build_system: drop Kconfig tests
2024-01-05 08:03:21 +00:00
Gunar Schorcht
00c9bb73d8
tests/pkg/fatfs: add SDMMC support
2024-01-05 07:22:27 +01:00
Marian Buschsieweke
866f2a00c0
Merge pull request #20226 from maribu/boards/generic-cc2538-cc2592-dk
...
boards/generic-cc2538-cc2592-dk: add board support
2024-01-05 00:35:11 +00:00
Marian Buschsieweke
947d05ed77
boards/generic-cc2538-cc2592-dk: add board support
...
The CC2538-CC2592-DK is one of the few readily available and
affordable boards featuring a legacy CC2538 MCU. This should make
maintaining RIOT support for that legacy MCU more affordable :-)
2024-01-05 00:00:48 +01:00
Benjamin Valentin
bca6d2721b
tests/build_system/kconfig_features: drop test
...
We are removing Kconfig dependency modeling, so the test is obsolete.
2024-01-04 15:37:27 +01:00
Marian Buschsieweke
f860d96a25
Merge pull request #19891 from chrysn-pull-requests/ws2181x_timer
...
drivers/ws281x: Add gpio_ll and timer based driver
2024-01-03 09:22:26 +00:00
benpicco
59eb017448
Merge pull request #20198 from Teufelchen1/chore/fmt_test
...
tests: Slightly increase coverage of fmt unittests
2024-01-02 14:02:59 +00:00
Fabian Hüßler
6e1e78d126
pkg/flashdb: have FAL MTD and defaults for partition 0 defined
2023-12-31 01:27:43 +01:00
Benjamin Valentin
d8cc2ac24f
tests: don't manually select native term
2023-12-23 20:27:47 +01:00
Benjamin Valentin
90dad75751
tests/build_system/test_tools: use native terminal
2023-12-22 18:01:21 +01:00
Oleg Hahm
c0e71b0592
Merge pull request #20172 from OlegHahm/pr/pyterm_native_pipe
...
pyterm: add native support
2023-12-21 23:08:22 +00:00
Frederik Haxel
475a55136a
unittests/tests-fib: test cleanup
...
- Added helper function to avoid 'format-truncation' warning
- Changed all `size_t` types to `unsigned`
- Changed function names from `_FIB_` to `_fib_`
2023-12-21 12:06:51 +01:00
Frederik Haxel
fa0cf05d0a
tests: Use size_t print format specifier
...
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
2023-12-21 12:02:37 +01:00
Teufelchen1
4a62b9ff31
tests: Slightly increase coverage of fmt unittests
2023-12-19 18:11:28 +01:00
benpicco
30f89714f2
Merge pull request #20195 from benpicco/coap_get_uri_query-defuse
...
nanocoap: defuse footgun in coap_get_uri_query()
2023-12-19 13:30:14 +00:00
Benjamin Valentin
d6ca03aaa9
tests/unittests: coap_get_uri_query() -> coap_get_uri_query_string()
2023-12-19 14:02:28 +01:00
chrysn
d86405cef4
drivers/ws281x: Add timer and gpio_ll based driver
2023-12-19 11:13:43 +01:00
Oleg Hahm
273486be78
examples: tests: unify native arguments for ZEP
2023-12-18 20:00:44 +01:00
Kevin "Tristate Tom" Weiss
5ba18df6fb
Merge pull request #20129 from bergzand/pr/mjson/initial
...
mjson: Initial include of package
2023-12-18 13:07:41 +00:00
MrKevinWeiss
18c1548077
tests/pkg/mjson: Add BOARD_INSUFFICIENT_MEMORY list
2023-12-18 13:56:25 +01:00
Oleg Hahm
99ff9bad03
examples: tests: update native TERMFLAGS
...
Updating the Makefiles for example and test applications to set the
TERMFLAGS correctly for native.
2023-12-18 13:44:20 +01:00
Oleg Hahm
2b779fc5a9
native: only set TERMFLAGS for pyterm
...
If TERMPROG is unset the default is pyterm. If TERMPROG is pyterm we
need to set the native flag.
2023-12-18 13:44:20 +01:00
Marian Buschsieweke
59573a8678
Merge pull request #20178 from Einhornhool/pr/fix-psa-build-config-tests
...
tests/sys/psa_crypto*: Fix failing tests
2023-12-16 22:27:55 +00:00
Lena Boeckmann
359cacd62c
tests/sys/psa_crypto_*: increase stack size for sw ecc tests
2023-12-16 22:08:16 +01:00
Lena Boeckmann
38db021456
tests/sys/psa_crypto_se*: remove test folders from se tests
2023-12-14 13:13:33 +01:00
benpicco
690efb2655
Merge pull request #20128 from benpicco/tests/periph/uart-nl
...
tests/periph/uart: allow to set line ending
2023-12-13 22:11:54 +00:00
benpicco
6eac1e1761
Merge pull request #15380 from benpicco/mtd_drop_write
...
mtd/*: drop .write() if .write_page() is implemented
2023-12-13 20:35:53 +00:00
Benjamin Valentin
3b489cf2f5
tests/mtd_mapper: drop .write() function
2023-12-13 16:56:51 +01:00
Benjamin Valentin
d525807598
unittests/tests-mtd: expect mtd_write() to always succeed
...
The MTD layer now takes care of splitting up writes, so it
should always work (as long as the destination address is
within the memory region)
2023-12-13 16:50:41 +01:00
Oleg Hahm
cb7a66d66b
tests: build_system: replace broken wiki link with link to docs
2023-12-13 12:24:58 +01:00
Frederik Haxel
4a1d07ab64
tests/unittests/tests-hashes: fixes wrong string length
2023-12-11 14:15:50 +01:00
385f6ad488
tests/pkg/mjson: Add test for mjson package
2023-12-11 13:30:58 +01:00
Marian Buschsieweke
bb07bb6613
Merge pull request #20160 from maribu/cpu/msp430/timer
...
cpu/msp430: improve periph_timer
2023-12-10 13:02:30 +00:00
Marian Buschsieweke
eca0bdd5aa
examples,tests: Update Makefile.cis
2023-12-10 13:51:04 +01:00
benpicco
67df59b0be
Merge pull request #20104 from gschorcht/drivers/mtd/mtddev_declarations
...
boards: remove `extern mtd_dev_t *mtd<n>` declarations from board definitions
2023-12-07 15:25:37 +00:00
Marian Buschsieweke
aa045d540f
tests/periph/timer: fix timeout computation and overflow handling
...
- the timeout computation for the spurious IRQ test confused numerator
and denominator in a fraction
- the timeout offset between timer channels was hardcoded to 5000 from
when the timer was only tested with 1 MHz as frequency
- This resulted in slooooow test runs when running at slow
frequencies
- fix overflow handling in the spinning wait
- likely this would never overflow anyway assuming that
`timer_init()` resets the counter value, but let's not rely on
this and just fix the bug for good
2023-12-07 16:07:24 +01:00
Gunar Schorcht
c93f0a70d4
tests/pkg/fatfs_vfs: replace external mtd0 declaration
...
Since the `extern mtd_dev_t *` declarations were removed from board definitions, `mtd_dev_get` has to be used instead.
2023-12-07 15:32:49 +01:00
Gunar Schorcht
1ad92d458f
tests/pkg/fatfs: replace external mtd0 declaration
...
Since the `extern mtd_dev_t *` declarations were removed from board definitions, `mtd_dev_get` has to be used instead.
2023-12-07 15:32:49 +01:00
Gunar Schorcht
cfc2232f11
tests/unittests: fix MTD unit test compilation
2023-12-07 15:32:49 +01:00
Marian Buschsieweke
8e67ee31ef
tests/periph/timer: rename speed --> timer_freq
2023-12-07 15:02:36 +01:00
Marian Buschsieweke
0097692b80
Merge pull request #16349 from maribu/periph_timer_query_freq
...
drivers/periph_timer: add timer_query_freqs()
2023-12-05 17:16:23 +00:00
Marian Buschsieweke
c05388faf5
Merge pull request #20152 from maribu/tests/sys/psa_crypto_se_cipher
...
tests/sys/psa_crypto_se_cipher: disable test on esp32-wroom-32
2023-12-05 16:16:09 +00:00
Marian Buschsieweke
754bbe4e6d
tests/sys/psa_crypto_se_cipher: disable test on esp32-wroom-32
...
The test fails systematically on the CI and prevents merging PRs.
2023-12-05 16:49:30 +01:00
Martine Lenders
7d1d776b86
Merge pull request #20151 from maribu/tests/net/gnrc_sixlowpan_frag_sfr_congure_impl
...
tests/net/gnrc_sixlowpan_frag_sfr_congure_impl: disable test on native
2023-12-05 15:25:00 +00:00
Marian Buschsieweke
3bc6494004
tests/periph_timer: use periph_timer_query_freqs
...
If the feature periph_timer_query_freqs is provided, use the
corresponding function to iterate over all supported frequencies to
increase test coverage.
2023-12-05 16:07:27 +01:00
Marian Buschsieweke
5b7a1bed2f
tests/net/gnrc_sixlowpan_frag_sfr_congure_impl: disable test on native
...
This test sporadically failed on multiple machines compiled with both
GNU and LLVM toolchains. To not waste more CI time by sporadically
failing unrelated CI runs, let's disable the test for now.
2023-12-05 15:48:26 +01:00
Marian Buschsieweke
167a70cd0f
tests/sys/psa_crytpo_se: disable test on esp32-wroom-32
2023-12-05 15:09:01 +01:00
Marian Buschsieweke
82d98ed377
examples, tests: update Makefile.ci for AVR8
...
Ran dist/tools/insufficient_memory for all AVR8 boards.
2023-12-01 19:37:05 +01:00
834e2a5fe4
Merge pull request #20124 from chrysn-pull-requests/allow-all-clean
...
tests/touch_dev_gestures: Fix default board
2023-12-01 09:32:22 +00:00
MrKevinWeiss
98e9016baa
tests/sys/psa_crypto_*: Update BOARD_INSUFFICIENT_MEMORY
2023-11-30 21:02:47 +01:00
Lena Boeckmann
de09b2a0b4
sys/psa_crypto: Build PSA Crypto functions based on module selection
2023-11-30 21:02:42 +01:00
Benjamin Valentin
53a1dbfda3
tests/periph/uart: allow to set line ending
2023-11-30 19:57:07 +01:00
chrysn
bf77808ea6
tests/touch_dev_gestures: Fix default board
2023-11-30 16:17:08 +01:00
Marian Buschsieweke
0887218224
Merge pull request #20118 from maribu/tests/periph/spi
...
tests/periph/spi: allow use on more boards
2023-11-30 11:11:54 +00:00
Marian Buschsieweke
b90f985d47
tests/periph/spi: allow use on more boards
...
- Disable the benchmark on low memory boards
- Reduce the help message length on low memory boards
- Update to new shell command interface using XFA
2023-11-30 11:10:04 +01:00
Mikolai Gütschow
6935ea21e7
sys/hashes: add SHA-512 support
2023-11-29 19:18:51 +01:00
Benjamin Valentin
b8ec36aef3
tests/unittests: coap_get_code() -> coap_get_code_decimal()
2023-11-28 13:11:11 +01:00
benpicco
c93a5b84a3
Merge pull request #20020 from gompper/periph/freqm
...
drivers/include/periph: add FREQM peripheral driver
2023-11-27 16:06:52 +00:00
Urs Gompper
4a9ae47499
tests/periph: add test-application for peripheral freqm
2023-11-23 20:53:14 +01:00
Marian Buschsieweke
fb9abe3626
tests/periph/selftest_shield: fix a misplaced comment
...
Move it to the correct place
2023-11-22 10:29:33 +01:00
Marian Buschsieweke
64b95a34e9
tests/periph/selftest_shield: improve output on error
...
Use `tiny_strerror()` to report back errors when calling initialization
functions.
2023-11-22 10:29:33 +01:00
Marian Buschsieweke
57488a57ab
tests/periph/selftest_shield: timer allocation conflict
...
- Detect when the same timer is used by `ztimer` (pulled in as
dependency for a peripheral driver, e.g. `periph_adc` on STM32F3) and
the test application
- Try to provide a better default (e.g. `TIMER_DEV(1)` when
`ztimer_periph_timer` is in use, `TIMER_DEV(0)` otherwise)
2023-11-20 17:17:26 +01:00
Marian Buschsieweke
4e7f972303
Merge pull request #20089 from maribu/tests/periph/selftest_shield2
...
tests/periph/selftest_shield: improve SPI test
2023-11-16 14:39:38 +00:00
Karl Fessel
8a9fdf4661
Merge pull request #20062 from derMihai/at_fix_pr
...
drivers/at: fix URC collision with command response
2023-11-16 12:04:48 +00:00
Marian Buschsieweke
14ff958659
Merge pull request #20083 from maribu/tests/periph/selftest_shield
...
tests/periph/selftest_shield: re-enable ADC test
2023-11-16 12:04:00 +00:00
Marian Buschsieweke
66d38101d8
tests/periph/selftest_shield: Consistently use DETAILED_OUTPUT
...
There already is `DETAILED_OUTPUT` to trade ROM size for more verbose
error messages, no need to abuse `DEBUG()` for the same as well.
2023-11-16 12:59:50 +01:00
