MichelRottleuthner
d77b8e1f52
Merge pull request #11321 from bergzand/pr/mrf24j40/fix_empty_element
...
drivers/mrf24j40: don't load data if iol->iol_len == 0
2019-04-01 17:09:15 +02:00
1804730c0e
mrf24j40: don't load data if iol->iol_len == 0
2019-04-01 11:46:42 +02:00
Martine Lenders
299a1903e6
Merge pull request #11215 from jia200x/pr/sx127x_fix
...
sx127x: ignore empty iolist element
2019-04-01 11:37:37 +02:00
Martine Lenders
85276fb7a0
Merge pull request #11214 from maribu/enc28j60
...
drivers/enc28j60: Allow sending with empty chunks
2019-03-30 18:08:01 +01:00
Sebastian Meiling
e9072b1e28
Merge pull request #10981 from gschorcht/cpu/esp8266/rodata_IROM/pr
...
cpu/esp8266: most .rodata sections are moved from DRAM to IROM (flash)
2019-03-29 20:18:06 +01:00
Martine Lenders
fe25330564
Merge pull request #11308 from miri64/netopt/enh/deprecate-IPV6_IID_release
...
netopt: specify drop of device driver support for IPV6_IID
2019-03-29 13:19:08 +01:00
Martine Lenders
d06c3fdcbb
netopt: specify drop of device driver support for IPV6_IID
...
This is not used anymore within the RIOT code-base so it is time to plan
the removal of the driver support. The deprecation was already put up
for the 2019.01 release, so I think removing it for the 2019.07 release
seems reasonable.
2019-03-29 12:45:30 +01:00
José Alamos
b5aaa6186f
Merge pull request #10599 from miri64/pkg/cleanup/openthread-rm-NETOPT_IPV6_IID
...
openthread: use l2util_ipv6_iid_from_addr() instead of NETOPT_IPV6_IID
2019-03-29 12:33:21 +01:00
Vincent Dupont
5e6205724d
Merge pull request #11304 from aabadie/pr/stm32_common/rtc_improve
...
stm32 common/rtc: reset the rtc when clock source has changed
2019-03-29 11:53:44 +01:00
d021d971fb
boards/nucleo-l073rz: enable LSE clock
2019-03-29 11:37:22 +01:00
330f97f15f
boards/b-l072z-lrwan1: enable LSE clock
2019-03-29 11:36:07 +01:00
9efd3c3660
stm32_common/rtc: reset RTC when clock source changed
2019-03-29 11:36:07 +01:00
Vincent Dupont
242c0cc7aa
Merge pull request #11266 from aabadie/pr/boards/b-l072z-lrwan1_rtt
...
boards/b-l072z-lrwan1: provide periph_rtt feature
2019-03-29 11:30:23 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
fafc26819a
Merge pull request #10942 from OTAkeys/fix/stm32_uart_dma
...
cpu/stm32_common: fix DMA releasing in UART driver
2019-03-29 10:06:31 +01:00
Sebastian Meiling
4242a026e9
Merge pull request #11197 from miri64/tests/fix/pktbuf-unittests-malloc
...
tests/unittests: exclude ENOMEM tests for gnrc_pktbuf_malloc
2019-03-29 10:03:11 +01:00
34ee41ee14
boards/b-l072z-lrwan1: provide and configure rtt peripheral
2019-03-29 09:33:09 +01:00
01b11ab86e
Merge pull request #11297 from OTAkeys/pr/stm32_rtt_reg_fix
...
cpu/stm32_common: fix rtt registers access
2019-03-29 09:32:04 +01:00
Kevin "Bear Puncher" Weiss
2d7c72db7f
Merge pull request #11231 from gschorcht/cpu/esp32/periph/uart_mode
...
cpu/esp32: add the new API function uart_mode to periph/uart
2019-03-28 19:29:38 +01:00
Martine Lenders
7220ed2b9c
Merge pull request #10908 from miri64/tests/new/i10881
...
tests: add tests to reproduce #10881
2019-03-28 19:20:09 +01:00
Martine Lenders
3b95ac0eb1
tests: add tests to reproduce #10881
2019-03-28 18:40:56 +01:00
Leandro Lanzieri
ef2b33c3d5
Merge pull request #11277 from obgm/tinydtls
...
pkg/tinydtls: Update repository URL to new location, fix posix_sockets
2019-03-28 17:17:46 +01:00
Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
Gunar Schorcht
ec013f74a7
cpu/esp32: add internal _uart_set_mode function
...
Configuration of UART mode is realized by an internal function which is also used by UART initialization function.
2019-03-28 16:36:04 +01:00
Gunar Schorcht
b9a8b98a9b
cpu/esp32: add config member values for uart_mode
...
Set default values for additional data members of UART device configuration data structure that are needed by uart_mode API function.
2019-03-28 16:36:04 +01:00
Gunar Schorcht
6132c08a90
cpu/esp32: add config members for uart_mode
...
Add data members to the UART device configuration data structure that are needed by uart_mode API function.
2019-03-28 16:36:04 +01:00
Martine Lenders
b381c0b24d
Merge pull request #11303 from cladmi/pr/jlink/failonerror
...
jlink.sh: Exit with an error on failure for JLinkExe commands
2019-03-28 14:48:51 +01:00
Kevin "Bear Puncher" Weiss
15c2a48fdf
Merge pull request #10839 from dylad/pr/sam0/remove_gclk_slow
...
cpu/sam0_common: remove unneeded GCLK_SLOW setup in i2c driver
2019-03-28 14:31:16 +01:00
Kevin "Bear Puncher" Weiss
831955c742
Merge pull request #11269 from cladmi/pr/makefiles/tests/refactoring/test/available
...
Makefile.include: add a 'test/available' target
2019-03-28 12:08:02 +01:00
Gaëtan Harter
29ada72a9e
Merge pull request #11254 from cladmi/pr/make/openocd/flashfile
...
makefiles/openocd.inc.mk: use FLASHFILE
2019-03-28 11:56:59 +01:00
Gaëtan Harter
a354b10964
jlink.sh: Exit with an error on failure for JLinkExe commands
...
On error Jlink exits with a no error code by default.
From the JLink User Guide:
'-ExitOnError' has the same meaning as the 'exitonerror' command
'exitonerror' command
This command toggles whether J-Link Commander exits on error or not.
1: J-Link Commander will now exit on Error.
0: J-Link Commander will no longer exit on Error.
Executing 'flash/reset' without a board connected now correctly returns an
error. For 'term' it does not show an error due to the way it is handled
internally.
It also returns an error when the board fails to do an operation when it
is in a state where it cannot be flashed for example.
2019-03-28 11:26:24 +01:00
Dylan Laduranty
ccf12c57a8
Merge pull request #10884 from fedepell/sam_rwee_support
...
sam0 flashpage RWWEE flash support
2019-03-28 11:00:25 +01:00
Cenk Gündoğan
99fe24fcfd
Merge pull request #11298 from miri64/gnrc_netif/fix/falls-through-comment
...
gnrc_netif: fix fall-through comment
2019-03-28 08:10:37 +01:00
Peter Kietzmann
e9293d9192
Merge pull request #11257 from brummer-simon/gnrc_tcp-fix_packet_flood
...
gnrc_tcp: Fix packet-flood while probing
2019-03-28 00:37:33 +01:00
Martine Lenders
768a117ade
gnrc_netif: fix fall-through comment
...
gcc 8.2.1 has problems with the comment being within the `#ifdef`
2019-03-27 19:45:40 +01:00
Cenk Gündoğan
44e4973cab
Merge pull request #11166 from miri64/gnrc_ipv6/fix/send-empty-payload
...
gnrc_ipv6: allow sending empty IPv6 packets
2019-03-27 19:17:01 +01:00
Martine Lenders
78247d9e35
Merge pull request #10464 from haukepetersen/opt_cordepsim_addrhandling
...
examples/cord_epsim: change default RD server addr handling
2019-03-27 18:57:54 +01:00
Martine Lenders
7931d66f79
Merge pull request #10895 from miri64/gnrc_rpl/enh/do-not-assert-netif
...
gnrc_rpl: do not assert netif on auto-init
2019-03-27 18:50:52 +01:00
Martine Lenders
c3efb91181
gnrc_ipv6: allow sending empty IPv6 packets
2019-03-27 18:45:04 +01:00
Martine Lenders
aa8e760e46
Merge pull request #11182 from miri64/gnrc_ipv6_nib/fix/pkt-null-on-error
...
gnrc_ipv6_nib: check if pkt is NULL on error
2019-03-27 18:38:32 +01:00
Hauke Petersen
840c8aeba2
cord/epsim: remove standalone submodule
2019-03-27 18:26:37 +01:00
Hauke Petersen
f8df35dcb3
cord/config: remove addr and port defaults
2019-03-27 18:26:37 +01:00
Hauke Petersen
3b842ba16a
shell/cord_ep: used COAP_PORT as default port
2019-03-27 18:26:37 +01:00
Hauke Petersen
0c5219f603
examples/cord_epsim: run registration loop locally
...
This commit rewrites the example so that the registration loop is
run inside the main() function instead of running the standalone
submodule of epsim. It also adapts the example application to
parse the RD UDP endpoint locally and provide this to epsim's
register() function.
2019-03-27 18:26:37 +01:00
Hauke Petersen
ec461661d8
net/cord_epsim: pass RD endpoint on runtime
2019-03-27 18:26:37 +01:00
Hauke Petersen
4d6570e1c8
Merge pull request #11281 from haukepetersen/add_nimble_scanner
...
ble/nimble: add scanner submodule and example application
2019-03-27 18:24:40 +01:00
Hauke Petersen
a4a513ca32
examples: add nimble_scanner example
2019-03-27 18:11:37 +01:00
Hauke Petersen
42c6702433
ble/nimble: add scanner submodule
2019-03-27 18:11:37 +01:00
Martine Lenders
f70bba0958
Merge pull request #11278 from haukepetersen/add_nimble_scanlist
...
ble/nimble: add scanlist submodule
2019-03-27 17:10:01 +01:00
Cenk Gündoğan
ac088374c8
Merge pull request #10596 from miri64/pkg/cleanup/lwip-rm-NETOPT_IID_IPV6-dep
...
lwip: use l2util_ipv6_iid_from_addr() instead of NETOPT_IPV6_IID
2019-03-27 16:55:23 +01:00
