Leandro Lanzieri
5438a967aa
boards/common/qn908x: perfom checksum on shadow copy
2022-03-07 10:28:13 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
c6151226ad
Merge pull request #17633 from fjmolinas/pr_ztimer_auto_adjust
...
sys/ztimer: add auto_adjust module
2022-02-23 10:01:05 +01:00
Francisco Molina
464d941a3e
boards: drop empty custom board_init & empty board.c
2022-02-22 18:27:37 +01:00
Benjamin Valentin
4d7a3c1dba
sys/board_common: add generic board_init() function
2022-02-22 10:04:44 +01:00
Fabian Hüßler
9163d78910
boards: add VBAT for stm32 based boards with ADC
2022-02-21 10:49:43 +01:00
Benjamin Valentin
468ea89953
boards: drop LED init
...
This is handled by periph_init_leds now
2022-02-18 14:35:43 +01:00
Francisco Molina
59d069c59d
boards: update CONFIG_ZTIMER_USEC_ADJUST% values
2022-02-18 13:07:49 +01:00
Benjamin Valentin
67417ce5a9
drivers/mtd_spi_nor: drop addr_width from mtd_spi_nor_params_t
...
This is now always determined at run-time.
2022-02-04 12:17:17 +01:00
Gunar Schorcht
529c6fa5b4
boards/arduino-mkr: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:27:53 +01:00
05da606ea6
Merge pull request #17438 from gschorcht/cpu/esp/feature_cleanup
...
boards/esp* and cpu/esp: feature definition cleanup
2022-01-04 10:51:33 +01:00
benpicco
40a6000cc5
Merge pull request #17410 from aabadie/pr/cpu/stm32u5
...
cpu/stm32: add support for U5 family
2022-01-02 18:45:57 +01:00
4465ce1984
boards/common/microbit: fix doxygen grouping
2021-12-23 11:07:58 +01:00
62a682dd2c
boards/b-u585i-iot02a: add initial basic support
2021-12-23 11:04:42 +01:00
Gunar Schorcht
aeb5d1197c
boards/esp8266: common periph features moved to cpu/esp_common
2021-12-23 10:33:57 +01:00
Gunar Schorcht
b1d2d46ee4
boards/esp32: common periph features moved to cpu/esp_common
2021-12-23 10:33:35 +01:00
Kevin "Tristate Tom" Weiss
e3f6212708
Merge pull request #17355 from leandrolanzieri/pr/boards/samd21/model_kconfig
...
boards/samd21-based: model Kconfig
2021-12-15 12:35:32 +01:00
Marian Buschsieweke
26eed0ae5a
Merge pull request #17399 from maribu/boards/common/nrf52xxxdk
...
boards/common/nrf52xxxdk: Expose LEDs via saul_pwm
2021-12-15 11:08:39 +01:00
Leandro Lanzieri
6ecbfe99f7
boards/common/sodaq: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
ea0039f7a0
boards/common/arduino-zero: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
7fe6eba806
boards/common/arduino-mkr: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
d249fc5ba7
boards/common/samdx1-arduino-bootloader: model Kconfig
2021-12-15 10:30:51 +01:00
MrKevinWeiss
deda2cfb97
boards: Fix stm32 based boards kconfig models
2021-12-15 09:31:45 +01:00
Marian Buschsieweke
c118df3eb2
boards/common/nrf52xxxdk: Expose LEDs via saul_pwm
...
This allows dimming the LEDs instead of only turning them on and off.
2021-12-14 22:02:56 +01:00
Kevin "Tristate Tom" Weiss
ed94dd7085
Merge pull request #17376 from leandrolanzieri/pr/makefiles/add_board_cpu_config_variables
...
makefiles/kconfig: add board & CPU config variables
2021-12-13 13:26:40 +01:00
Leandro Lanzieri
df7ce1c647
makefiles/kconfig: use two lists for boards and CPUs default configs
...
This introduces KCONFIG_BOARD_CONFIG and KCONFIG_CPU_CONFIG variable for
boards and CPUs (including common directories) to add default
configuration files to be merged. The current approach, as it uses
Makefile.features, would include boards first, not allowing them to
override CPU configurations.
2021-12-13 12:33:21 +01:00
Leandro Lanzieri
4be55b7a49
boards/common/esp8266: model Kconfig
2021-12-10 18:54:07 +01:00
Leandro Lanzieri
b3b468ad8b
boards/esp32: model Kconfig
2021-12-10 18:54:07 +01:00
Francisco
7362074f49
Merge pull request #17235 from leandrolanzieri/cpu/kinetis/model_kconfig
...
cpu/kinetis: model kconfig
2021-12-09 14:22:10 +01:00
Francisco Molina
766bfeace4
boards: model nrf52 boards
2021-12-08 13:25:29 +01:00
Francisco Molina
e25076e370
boards/common/particle-mesh: use nrf52/bootloader_nrfutil.dep.mk
2021-12-08 13:25:29 +01:00
Francisco Molina
7a1758d7f4
boards/particle: use FEATURES_REQUIRED for periph_uart_hw_fc
2021-12-08 13:25:29 +01:00
Francisco Molina
48777f5ba4
boards/common/nrf52xxxdk: align module name with dirname
2021-12-08 13:25:29 +01:00
Leandro Lanzieri
8337d6d762
boards/kinetis: model Kconfig
2021-12-07 11:33:24 +01:00
Leandro Lanzieri
4f51174eb4
Merge pull request #17331 from MrKevinWeiss/pr/kconfig/samd5x
...
boards/adafruit-itsybitsy-m4: Model kconfig
2021-12-06 10:22:37 +01:00
MrKevinWeiss
b6e7ab3443
boards/adafruit-itsybitsy-m4: Model kconfig
2021-12-06 09:06:12 +01:00
Marian Buschsieweke
7cd9d615fa
cpu/stm32/periph: Use uintptr_t for periph addr
...
The peripheral register addresses are fixed, properly aligned addresses. Storing
them as uintptr_t makes live easier when casting them to helper structs, as no
intermediate cast to uintptr_t is needed to silence -Wcast-align.
2021-12-03 10:12:32 +01:00
Leandro Lanzieri
d7bf363517
Merge pull request #17290 from fjmolinas/pr_kconfig_msp430
...
cpu/msp430: add Kconfig
2021-12-03 08:37:11 +01:00
Francisco Molina
7ab05fa129
cpu/msp430: add Kconfig
2021-12-02 16:33:19 +01:00
Leandro Lanzieri
004da59672
sys/ztimer/kconfig: enable xtimer compat only with timer backend
...
This also moves the selection of MODULE_ZTIMER_PERIPH_TIMER from
MODULE_ZTIMER_USEC to the visible symbol ZTIMER_USEC.
2021-12-02 09:38:06 +01:00
Leandro Lanzieri
14ef4e7aed
boards/qn908x: model Kconfig
2021-11-29 13:56:43 +01:00
Leandro Lanzieri
d962787043
Merge pull request #17274 from fjmolinas/pr_kconfig_nrf51
...
cpu/nrf51: model kconfig
2021-11-26 12:55:27 +01:00
Francisco Molina
cfb53fef39
boards/common/nrf51: add initial Kconfig modeling
...
- add airfy-beacon
- add calliope-mini
- add microbit
- add nrf51dk
- add nrf51dongle
- add nrf6310
- add yunjia-nrf51822
2021-11-26 10:39:40 +01:00
Francisco Molina
bbda5fabfe
boards/*microbit*: move saul_gpio inclusion to common
2021-11-25 11:55:28 +01:00
Leandro Lanzieri
776875a94c
boards/common/saml1x: model Kconfig
2021-11-25 11:37:26 +01:00
Leandro Lanzieri
3de4b395df
boards/common/arduino-due: model Kconfig
2021-11-23 11:08:40 +01:00
Leandro Lanzieri
845681448d
cpu/atmega_common: move PCINT documentation from boards
2021-11-22 12:25:57 +01:00
Leandro Lanzieri
e5164ca970
boards/common/{atmega,atxmega,arduino-atmega}: model Kconfig
2021-11-22 12:25:30 +01:00
Leandro Lanzieri
0e62d83edb
boards: model efm32 boards Kconfig
2021-11-18 09:03:06 +01:00
2f44452d78
boards/microbit: migrate to ztimer
2021-11-04 15:39:58 +01:00
b0fa356ec6
boards/calliope-mini: use microbit common mineplex module
2021-11-03 12:10:14 +01:00
67add34e75
boards/microbit: put mineplex dependency resolution in common
2021-11-03 11:25:56 +01:00
Marian Buschsieweke
9893efd96f
boards/common/silabs: fix dependencies
...
The module silabs_pic depends on the feature periph_i2c. However, the
dependency resolution just selected the module implementing that
feature which bypasses feature checks.
2021-11-02 13:34:04 +01:00
Leandro Lanzieri
f64b166319
Merge pull request #16845 from MrKevinWeiss/pr/kconfig/supportstms
...
.murdock: Add nucleo boards to kconfig test
2021-11-01 09:55:22 +01:00
J. David Ibáñez
c965ce3de6
boards/common/arduino-atmega: define F_CPU
...
This fixes the following error:
$ BOARD=arduino-mega2560 make -C tests/pkg_arduino_sdi_12/
[...]
[...]/RIOT/build/pkg/arduino_sdi_12/src/SDI12_boards.cpp:35:16: error: ‘preSDI12_TCCR2B’ defined but not used [-Werror=unused-variable
35 | static uint8_t preSDI12_TCCR2B;
2021-10-28 15:59:40 +02:00
benpicco
f57e2f1e99
Merge pull request #16055 from benpicco/soc_init
...
cpu: call cpu_init() from startup code, not from board
2021-10-18 20:52:53 +02:00
benpicco
7a413558db
Merge pull request #16305 from iosabi/esp_rts_dtr
...
boards/common/esp8266: Set RTS and DTR to 0 on pyterm.
2021-10-18 16:42:55 +02:00
ngandrass
ac1250786a
boards/nucleo-l152re: Fix Kconfig board name
...
Kconfig board name for the nucleo-l152re contained a "0" (zero) instead
of the capital letter "O". All faulty occurrences were replaced.
2021-10-18 11:22:27 +02:00
MrKevinWeiss
c7820cf7e5
*/rtt|rtc: Fix Kconfig modeling
2021-10-14 11:28:44 +02:00
MrKevinWeiss
c9ffb8d2af
board/common/nucleo: Use and doc HAVE_* Kconfig
2021-10-14 11:28:42 +02:00
Benjamin Valentin
fc88c4c4e5
boards: drop cpu_init()
2021-10-13 23:36:41 +02:00
Benjamin Valentin
d2fdacd3f3
b/c/particle-mesh: move monofirmware setup to post_startup()
2021-10-13 23:21:56 +02:00
Gunar Schorcht
54c049fe0c
boards/esp_common: fix refs to CPU doc section
2021-10-13 17:37:16 +02:00
Marian Buschsieweke
49ab2f0ef2
boards/*esp32*: Fix documentation format
...
Fix broken references and missing open/closing group commands.
2021-10-10 21:35:31 +02:00
Francisco Molina
3e4b35c445
boards/nrf52840dk-nrf52dk-dwm1000: add kconfig dependencies
2021-09-29 10:19:27 +02:00
Francisco Molina
c9de733c52
cpu/nrf52/Makefile.dep: move radio dependencies from boards/common
2021-09-29 10:16:31 +02:00
MrKevinWeiss
483bca453e
boards/common/remote: Add Kconfig for remote boards
2021-09-08 12:40:32 +02:00
Martine Lenders
873f6936ea
Merge pull request #16788 from benpicco/common/nrf52-netdev_default
...
boards/nrf52: replace gnrc_netdev_default with netdev_default
2021-09-03 14:37:25 +02:00
Benjamin Valentin
702c3435a8
boards/nrf52: replace gnrc_netdev_default with netdev_default
...
Only nimble depends on GNRC, but we want to replace gnrc_netdev_default
with netdev_default, so check for gnrc instead.
2021-09-02 14:36:22 +02:00
Benjamin Valentin
87f7e5a963
cpu/atmega_common: move clock init to common code
...
This code should not be in the realm of the board config, but in
common arch code.
2021-08-27 17:06:50 +02:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Benjamin Valentin
7561d83001
boards/common/kw41z: skip led_init() for riotboot
2021-07-20 22:51:59 +02:00
Benjamin Valentin
90b5d4cfbf
boards/common/kw41z: make led_init() static
...
this saves a few bytes of ROM
2021-07-20 22:51:59 +02:00
MrKevinWeiss
02a2de4916
cpu/stm32: Add Kconfig dependency modeling
2021-07-02 15:11:05 +02:00
Francisco Molina
3269bcef88
boards/common/arduino-atmega: add USEC_ADJUST values
2021-06-15 16:45:34 +02:00
Francisco Molina
d9ee424b7c
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 08:29:09 +02:00
iosabi
52107b2416
esp8266: Support UART1 and other UART0 pins.
...
The esp8266 CPU has actually two hardware UART peripherals. UART0 is
used by the boot ROM for flashing and serial output during boot,
typically at a baudrate of 74880 bps until the bootloader or application
sets the more standard 115200 baudrate. This UART0 device has two
possible pins for TXD, GPIO1 and GPIO2, which are both set to TXD by the
boot ROM. esp8266 modules will typically have GPIO1 labeled as the TX
pin, but it is possible to use GPIO2 for that purpose even while
flashing the device with esptool.py.
The second device, UART1, also has two options for TXD, GPIO2 and GPIO7,
and only one option for RXD, GPIO8. However, GPIO7 and GPIO8 are used
by the flash internally so those options are not very useful unless
maybe while running from IRAM with the flash disabled, for example for
a debugger over UART1.
This patch allows boards to override UART{0,1}_{R,T}XD in their
periph_conf.h to configure the uart selection. Defining UART1_TX will
make the UART_DEV(1) device available.
Tested with:
```CFLAGS='-DUART1_TXD=GPIO2' make -C tests/periph_uart BOARD=esp8266-esp-12x flash term```
* Connected one USB-UART to the standard GPIO1 and GPIO3 for flashing
and console. After flashing we see the manual test output at 115200
bps
* Connected a second USB-UART with RX to GPIO2 running at 74880.
Then run on the first console:
```
> init 1 74880
> send 1 hello
```
The word "hello" appears on the second UART connection.
Note that GPIO2 is used during boot for UART0's TX until the application
or bootloader set it to a regular GPIO, so some boot ROM messages at
74880 bps are visible. After running `init 1 74880` it is set to UART1's
TX.
2021-05-02 12:27:27 +00:00
Francisco
d5f9b99555
Merge pull request #16344 from kfessel/p-efm32-rtt-freq
...
cpu/efm32: add RTT_FREQUENCY support to efm32
2021-04-21 09:59:10 +02:00
Akshai M
fd8ddd6161
boards: add nucleo-wl55jc
...
Co-authored-by: Kevin "Tristate Tom" Weiss <weiss.kevin604@gmail.com>
2021-04-20 21:04:29 +02:00
Akshai M
c485c774cf
cpu/stm32: add stm32wl
2021-04-20 20:57:48 +02:00
Karl Fessel
c41342dc5b
boards/*efm32*: do not force RTT_FREQUENCY
...
while keeping a sane (rtt shared with rtc (counter)) default
this commit adds the ability to define RTT_FREQUENCY
to some thing different than 1 Hz
2021-04-20 11:12:45 +02:00
iosabi
73fab03e31
boards/common/esp8266: Set RTS and DTR to 0 on pyterm.
...
When flashing the ESP8266 with the flash tool it is possible to connect
RTS to the reset line and DTR to GPIO0 to automatically reboot the
device into flash mode and then reboot the device again into normal
mode.
pyterm leaves these two signals unset unless we specify a --set-rts=0 or
1, and the value of these lines would depend on the UART driver.
This patch explicitly sets RTS and DTR to 0 (high level) in the
Makefile.include config so `make term` releases the reset line,
otherwise the device may be left in reset mode after pyterm starts.
2021-04-10 22:50:35 +02:00
chrysn
fa9a297e7c
Merge pull request #16250 from chrysn-pull-requests/nrf52-more-timers
...
cpu/nrf52: Expose more timers
2021-03-30 20:28:27 +02:00
chrysn
1da4693e5c
b/c/microbit: Use timer 2 on microbit-v2
...
Timer 1 is already in use for NRF802154_TIMER
2021-03-30 16:34:44 +02:00
chrysn
2b09d3162a
cpu/nrf52: Expose more timers
2021-03-30 16:34:44 +02:00
Francisco Molina
d2fdb7479e
boards/arduino-due: allow changing frequency
2021-03-30 14:22:50 +02:00
Gerson Fernando Budke
85fcba0ce9
boards/common: Introduce Atmel xmega common
...
Add atxmega common board definitions. This works is a port from @josar
with few modifications.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-15 20:16:10 -03:00
Gerson Fernando Budke
d041199825
cpu/avr8_common: Move irq_enable from board to cpu
...
Some mega boards enabling global irq at board_init. This moves that
responsability to cpu/avr8_common to create a common point to all
variants.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-15 20:16:10 -03:00
87cf4e387f
boards: set supported programmers
2021-02-24 13:30:34 +01:00
8d9cc3c100
boards/msp430: setup supported programmers
2021-02-24 13:29:56 +01:00
5b77361cc4
boards/cc26x2_cc13x2: set supported programmers
...
For now, only openocd and uniflash are supported
2021-02-24 13:29:39 +01:00
1cb2221273
boards/atmega: set avrdude as only supported programmer
2021-02-24 13:29:39 +01:00
18b1e16d3a
boards/nrf52: setup supported programmers
2021-02-24 13:29:38 +01:00
7a4f926aae
boards/nrf51: setup supported programmers
2021-02-24 13:29:17 +01:00
6cc00288b4
boards/silabs: define supported programmers
2021-02-24 13:29:16 +01:00
278bfffbad
boards/frdm: set openocd as only supported programmer
2021-02-24 13:29:16 +01:00
1ddf61a0c5
boards/cc2538: set cc2538-bsl as supported programmer
2021-02-24 13:28:53 +01:00
93891124c7
boards/iotlab: only openocd programmer is supported
2021-02-24 13:28:01 +01:00
e0225272d8
boards/samd21-bootloader: add bossa as supporter programmer
2021-02-24 13:27:04 +01:00
7e21f25779
make: namespace openocd PRE_FLASH_CHECK_SCRIPT variable
2021-02-23 21:22:55 +01:00
