Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
emmanuelsearch
61c793aa4c
cpu/cortexm_common: Add image_baseaddr support for Cortex-M23
2019-03-26 11:46:00 +01:00
emmanuelsearch
78cbf4fb57
saml1x: Add riotboot support
2019-03-26 11:46:00 +01:00
Gaëtan Harter
2523c1b8ef
Merge pull request #11126 from bergzand/pr/nrf52/riotboot
...
nrf52: Add riotboot support
2019-03-20 19:58:41 +01:00
Gaëtan Harter
f9cee9e820
Merge pull request #11174 from fjmolinas/stm32lx_dual_bank
...
boards/common/stm32l0: use dual bank with openocd if available
2019-03-20 18:38:19 +01:00
Gaëtan Harter
9d5e06a512
boards/lpc2k_pgm: use FLASHFILE for boards using lpc2k_pgm
...
Update to use FLASHFILE as file to be flashed on the board.
2019-03-20 14:31:25 +01:00
francisco
026f7dc4a4
boards/stm32lx: use openocd dual bank if possible
2019-03-14 18:10:27 +01:00
Gaëtan Harter
702db3468d
msba2: compile 'lpc2k_pgm' when flashing
...
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
2019-03-14 16:41:13 +01:00
005710effb
nrf52: include riotboot feature when possible
...
The riotboot feature is not compatible with the nordic_softdevice_ble
package at the moment
2019-03-14 12:03:39 +01:00
e3b10e3d7d
Merge pull request #10343 from MrKevinWeiss/pr/fixnucleol1flasher
...
boards/stm32l0: Fix openocd to prevent flash locking
2019-03-14 10:27:02 +01:00
Gilles DOFFE
f3130a3a81
boards/nucleo64: add motor driver
...
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
f390a8df2e
boards/nrf5x: use periph_temperature with saul
2019-03-08 21:14:22 +01:00
Hauke Petersen
7cb1049eef
Merge pull request #10268 from SemjonKerner/add_nrf154
...
cpu/nrf52/radio: initial support for nrf52's ieee802.15.4 radio
2019-03-04 16:18:43 +01:00
Semjon Kerner
84ebd83a62
boards/nrf52840dk: support ieee802.15.4 radio
2019-03-04 13:21:47 +01:00
7d31bb43f1
boards/stm32/f4: factorize common clock configuration (168/8)
...
A common configuration file is introduced for stm32f4 with core clock
at 168MHz with HSE at 8MHz, 2 configuration files are introduced to²:
distinguish between clock configuration with and without LSE.
2019-02-27 21:49:55 +01:00
Rotzbua
d606c11d11
tests/leds: initialize led0 by default
...
fix unexpected behavior:
reference #9949
reference #10294
fix redefinition for AUTO_INIT_LED0
2019-02-27 13:09:29 +01:00
7a5d2ad2fb
boards/nrf52: thingy52 and ruuvitag don't work with openocd
2019-02-26 11:15:36 +01:00
826df5648b
boards/nrf52: update nrf52 common documentation
...
Add common flashing notes + move the doc in a separate doc.txt file
2019-02-26 11:03:06 +01:00
3eb17f56fa
boards/nrf52xxxdk: add openocd as programmer
...
For the moment openocd doesn't work when softdevice blob module is loaded
2019-02-26 11:02:57 +01:00
Marian Buschsieweke
7bc9b4b707
boards/common/atmega: Refactoring periph_conf.h
...
- Moved code for periph_conf of all ATmega based boards to boards/common/atmega
- Added possibility to override config from individual board:
- Named file `periph_conf_atmega_common.h` and let this be included from
`board/$BOARD/include/periph_conf.h` to allow modifications
- Guarded individual periph configs by `#ifndef $PERIPH_NUMOF` ... `#endif`
2019-02-25 18:48:09 +01:00
Francisco Acosta
7139393394
boards: include potential features from CPU for atmega boards
...
Features must be provided by the board if they're actually
available on board. Other features might be provided by the
CPU.
Some grouping is also removed as it is not necessary.
2019-02-05 17:12:04 +01:00
Francisco Acosta
1a98d64cd5
boards/arduino*: use common avrdude.inc.mk from atmega_common
...
Leverages common flasher (avrdude) and removes unnecessary exports.
Moreover, a reuse of serial.inc.mk is perfomed from the same
atmega_common/Makefile.include
2019-02-05 17:12:03 +01:00
1be60741e3
boards/nrf52xxxdk: refactor UART config
2019-01-25 15:51:50 +01:00
Martine Lenders
fbe43634d9
Merge pull request #10844 from maribu/ethernet_shield
...
boards/arduino*: Added/refactored params for W5100
2019-01-24 11:59:43 +01:00
Marian Buschsieweke
d2c8eab793
boards/arduino*: Added/refactored params for W5100
...
- ATmega based boards: Added parameter for W5100 to board_common.h
- Arduino Due based boards: Use board.h instead of providing w5100_params.h
2019-01-22 15:46:33 +01:00
7e3c382547
Merge pull request #10653 from dylad/pr/saml1x_support
...
cpu/saml1x: add support for SAML10 and SAML11 MCUs (Cortex-M23)
2019-01-22 08:53:06 +01:00
Sebastian Meiling
0edf76d362
Merge pull request #9984 from kaspar030/refactor_atmega_libc
...
cpu/atmega_common: refactor AVR libc code into module
2019-01-22 08:41:37 +01:00
Dylan Laduranty
99966b318a
board/common/saml1x: add common configuration
2019-01-21 17:07:18 +01:00
7313525035
atmega_common: refactor avr-libc-extra into avr_libc_extra module
2019-01-21 14:37:08 +01:00
9daf3c74a9
boards/iotlab-m3: disable DMA with SPI
2019-01-15 19:49:32 +01:00
Gunar Schorcht
fa0b4b801f
cpu/esp8266: doc fixes
2019-01-09 16:55:21 +01:00
0b6bccb543
boards/iotlab-m3: configure and use DMA
...
Used with UART and SPI peripheral
2019-01-08 09:32:18 +01:00
Kevin "Bear Puncher" Weiss
d9f26dbbe2
Merge pull request #10636 from aabadie/pr/cpu/nrf5x_gpio_common
...
cpu/nrf5x: move periph_gpio/periph_gpio_irq at an even more common level
2019-01-03 11:37:48 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
4ae15d18b5
boards/stm32based: remove periph_gpio/irq from board level
2018-12-18 21:51:14 +01:00
839daf871a
boards/nrf52: remove periph_gpio feature
...
It is now provided at cpu level in cpu/nrf5x_common
2018-12-18 21:33:27 +01:00
Francisco Acosta
3cf33f7b5c
boards: add riotboot feature to tested boards
...
Currently only tested boards provide the feature riotboot.
Potentially all boards embeding a cortex-m0+/3/4/7 are
able to have riotboot as a feature, but other dependencies
need to be met, e.g. usage of cortexm.ld linker script,
double initialisation of cpu_init(), etc. See doc in
bootloaders/riotboot.
2018-12-18 19:31:35 +01:00
Peter Kietzmann
f1e80c4dd3
Merge pull request #10434 from aabadie/pr/sam0_gpio_features
...
cpu/sam0_common: provide periph_gpio/gpio_irq features at cpu level
2018-12-18 17:54:11 +01:00
Gaëtan Harter
321dc5292f
Merge pull request #10548 from jcarrano/flash-canned-recipe
...
Makefile.include: flash: do not peek into MAKECMDGOALS.
2018-12-18 14:09:55 +01:00
d95e19af15
boards*: remove periph_gpio/gpio_irq provided feature
...
It is now provided at cpu level
2018-12-17 20:54:09 +01:00
Martine Lenders
78308b93df
Merge pull request #10279 from aabadie/pr/boards/nrf52_common
...
boards/common/nrf52: introduce new and more generic common place
2018-12-17 12:29:57 +01:00
MrKevinWeiss
d7eb070eb4
cpu/stm32f1: Add remap support for stm32f1 cpus and boards
...
This commit fixes configuration problems when trying to use i2c pins that need to be remapped.
All B8 and B9 pins for STM32F1 need to be remapped, so a check is done if the remappable pins are selected.
2018-12-14 09:16:37 +01:00
5b17d52542
Merge pull request #10466 from maribu/stm32f103c_i2c
...
boards/common/stm32f103c8: Fixed I2C configuration
2018-12-13 11:25:22 +01:00
5429c71cd3
boards/nrf52xxdk: use available nrf52 common place
2018-12-13 10:15:42 +01:00
cd206a909c
boards/common/nrf52: add common nrf52 place
2018-12-13 10:15:42 +01:00
Leandro Lanzieri
4ce63d00ea
Merge pull request #10280 from fedepell/stk3700_arduino
...
boards/common/silabs: add Arduino API support for SiLabs boards
2018-12-12 09:51:13 +01:00
