Gunar Schorcht
f8c060e291
boards/common: add common board definition for ESP32-C3
2022-08-05 22:26:22 +02:00
benpicco
004ac82af5
Merge pull request #18394 from gschorcht/cpu/esp32/fix_kconfig_for_esp_eth
...
cpu/esp32: fix provided features and Kconfig for esp_eth
2022-08-05 19:47:03 +02:00
benpicco
cf745e954e
Merge pull request #18387 from gschorcht/cpu/esp32/cleanup_spi_flash_mode
...
cpu/{esp8266,esp32}: cleanup of SPI Flash configuration
2022-08-05 12:24:45 +02:00
krzysztof-cabaj
584d5a269d
boards/nucleo64: change all memory sizes to KiB
2022-08-04 15:49:42 -04:00
krzysztof-cabaj
9797bb5b30
boards/g431rb: add short board info and flashing commands
2022-08-04 13:49:35 -04:00
Gunar Schorcht
d5040d4b1c
boards/waveshare-nrf82540-eval-kit: add Kconfig
2022-08-04 10:04:54 +02:00
Gunar Schorcht
8419c0241f
boards/waveshare-nrf52840-eval-kit: add SD card as MTD
2022-08-04 10:04:54 +02:00
Gunar Schorcht
93f60c4386
boards/waveshare-nrf82540-eval-kit: add Arduino support
2022-08-04 10:04:54 +02:00
Gunar Schorcht
3af0283279
boards/waveshare-nrf52840-eval-kit: add SAUL support
2022-08-04 10:04:54 +02:00
Gunar Schorcht
911905303b
boards: support for the Waveshare nRF52840 Eval Kit
2022-08-04 10:04:54 +02:00
Marian Buschsieweke
4d6fb6e487
boards/nucleo-f767zi: add PWM config
...
This is a verbatim copy of the PWM config of `boards/nucleo-f746zg`.
However, those boards are almost identical. I successfully tested
the configuration via https://github.com/RIOT-OS/RIOT/pull/18392
2022-08-04 08:53:25 +02:00
krzysztof-cabaj
790bda0b87
boards/nucleo-g071rb: add short board info and flashing commands
2022-08-03 14:35:45 -04:00
krzysztof-cabaj
3febf21450
boards/nucleo-g070rb: add short board info and flashing commands
2022-08-03 14:24:53 -04:00
Gunar Schorcht
5b0b0e0a8e
boards/esp32: replace HAS_PERIPH_ETH by HAS_ESP_ETH in Kconfig
2022-08-03 09:01:05 +02:00
Gunar Schorcht
3f7416dda1
boards/esp32: replace feature periph_eth by esp_eth
2022-08-03 06:38:44 +02:00
krzysztof-cabaj
9a9dd31e15
boards/nucleo-f446re: add cpy2remed flashing commands
2022-08-02 12:22:56 -04:00
Gunar Schorcht
ae16753f6f
boards/esp*: replace FLASH_MODE_* by CONFIG_*FLASHMODE_* defines
...
The former FLASH_MODE_{DOUT,DIO,QOUT,QIO} defines are replaced by the corresponding CONFIG_FLASHMODE_{DOUT,DIO,QOUT,QIO} and CONFIG_ESPTOOLPY_FLASHMODE_{DOUT,DIO,QOUT,QIO} as used by the ESP-IDF. This is also needed for the migration of defining flash mode in Kconfig.
2022-08-02 07:24:30 +02:00
krzysztof-cabaj
ceb0f5a3fd
boards/nucleo-f411re: add cpy2remed flashing commands
2022-08-01 13:14:27 -04:00
krzysztof-cabaj
9dadeea2b9
boards/nucleo-f410rb: add cpy2remed flashing commands
2022-08-01 12:48:11 -04:00
krzysztof-cabaj
3c90f86d08
boards/nucleo-f401re: add cpy2remed flashing commands
2022-08-01 12:20:14 -04:00
Dylan Laduranty
b278002a8e
boards/saml11-xpro: update doc for SERCOM1 fuse
...
SAML11 needs special handling for enabling SERCOM1 on EXT1. Update board documentation accordingly
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2022-07-28 22:42:26 +02:00
Leandro Lanzieri
b3ac6b7057
boards select cc2538 Kconfig feature
2022-07-28 09:32:25 +02:00
Leandro Lanzieri
8390641638
drivers/kw41zrf: model Kconfig
2022-07-28 09:32:24 +02:00
Leandro Lanzieri
c3501e8b35
drivers/kw2xrf: model Kconfig
2022-07-28 09:32:24 +02:00
Leandro Lanzieri
9225c4b80e
drivers/cc2420: model Kconfig
2022-07-28 09:32:24 +02:00
Leandro Lanzieri
7d95e9b5a9
drivers/at86rf2xx: model Kconfig
2022-07-28 09:32:24 +02:00
krzysztof-cabaj
c5d4004c53
boards/nucleo-f303re: add cpy2remed flashing commands
2022-07-26 07:10:34 -04:00
Leandro Lanzieri
1716638792
cpu/stm32/periph_eth: model in Kconfig
2022-07-25 11:08:32 +02:00
Leandro Lanzieri
88df973783
cpu/sam0_common/sam0_eth: model in Kconfig
2022-07-25 11:08:32 +02:00
Leandro Lanzieri
575e58dc5b
cpu/esp32/esp-eth: model in Kconfig
2022-07-25 11:08:32 +02:00
krzysztof-cabaj
54ea1fbf7c
boards/nucleo-f302r8: add cpy2remed flashig commands
2022-07-22 16:29:04 -04:00
krzysztof-cabaj
636304bc66
boards/nucleo-f103rb: add cpy2remed flashing commands
2022-07-21 16:23:35 -04:00
krzysztof-cabaj
cffd2d0130
boards/nucleo-f091rc: add cpy2remed flashing commands
2022-07-20 02:40:41 -04:00
krzysztof-cabaj
624dee2ce1
boards/nucleo-f072rb: add cpy2remed flashing commands
2022-07-19 12:08:41 -04:00
krzysztof-cabaj
d8d27ed25a
boards/nucleo-f070rb: add cpy2remed flashing commands
2022-07-18 17:39:20 -04:00
krzysztof-cabaj
f45ace72b8
boards/nucleo-f030r8: add cpy2remed flashing commands
2022-07-18 13:00:20 -04:00
Gunar Schorcht
06d3616710
cpu/esp32: move CPU_FAM definition to board definition
...
To support ESP32x SoC families with existing Makefiles, CPU_FAM has to be defined by board definition.
2022-07-18 13:05:21 +02:00
Gunar Schorcht
c0becd2819
cpu/esp32: port periph/i2c_hw to ESP-IDF i2c HAL
2022-07-17 18:48:23 +02:00
benpicco
94e9116c04
Merge pull request #18276 from gschorcht/cpu/esp32/periph_hal_esp32_pwm
...
cpu/esp32: use ESP-IDF ledc HAL for periph/pwm
2022-07-14 18:09:01 +02:00
Gunar Schorcht
77647ea10c
boards/esp32: PWM configuration cleanup
2022-07-14 15:50:47 +02:00
Gunar Schorcht
2ae2facf90
cpu/esp32: port periph/pwm to ESP-IDF ledc HAL
2022-07-14 15:50:47 +02:00
chrysn
d9879c96ca
Merge pull request #16833 from chrysn-pull-requests/rust-lib
...
Add some Rust library building infrastructure
2022-07-10 21:39:35 +02:00
chrysn
841e4deee5
lsm303agr: New sensor driver using external Rust crate
...
It is enabled by saul_default on microbit-v2.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
2022-07-10 21:27:12 +02:00
Marian Buschsieweke
bad2527ede
Merge pull request #18295 from jmfriedt/master
...
boards/im880b: im880b board clock definition
2022-07-10 14:06:07 +02:00
Jean-Michel Friedt
8025e6befb
boards/im880b: im880b board clock definition
...
Signed-off-by: Jean-Michel Friedt <friedtj@free.fr>
2022-07-10 13:21:44 +02:00
Peter Kietzmann
9af87803c6
Merge pull request #18137 from Einhornhool/pr/update-cryptoauth-package
...
pkg/cryptoauthlib: Update package to latest version
2022-07-06 13:30:16 +02:00
Lena Boeckmann
422d81a2b4
pkg/cryptoauthlib: Update package to latest version
2022-07-06 10:45:39 +02:00
Marian Buschsieweke
1e17aae6a9
Merge pull request #18291 from krzysztof-cabaj/doc-nucleo144
...
boards/nucleo144: doc update - usage of cpy2remed programmer and short overview of board
2022-07-04 21:47:15 +02:00
krzysztof-cabaj
bd4e5aa0c4
boards/nucleo-f412zg: fixup trailing whitespace
2022-07-04 14:03:55 -04:00
krzysztof-cabaj
b1c50fe89a
boards/nucleo-f413zh: add short board info and flashing commands
2022-07-04 14:03:55 -04:00
krzysztof-cabaj
f9ca5bdc3d
boards/nucleo-f412zg: add short board doc and flashing commands
2022-07-04 14:03:55 -04:00
krzysztof-cabaj
a802e3d496
boards/nucleo-f722ze:short board info and cpy2remed flashing command
2022-07-04 14:03:44 -04:00
krzysztof-cabaj
08587ffd39
boards/nucleo-f746zg: add short bord description and flashing commands
2022-07-04 14:03:44 -04:00
krzysztof-cabaj
033f61bd1f
boards/nucleo-439zi: add short board info
2022-07-04 14:03:44 -04:00
krzysztof-cabaj
82200744c7
boards/nucleo144: fix all memory sizes to KiB and MiB
2022-07-04 14:03:44 -04:00
krzysztof-cabaj
c9441272e4
boards/nucleo-f767zi:short board info and cpy2remed flashing command
2022-07-04 14:01:48 -04:00
krzysztof-cabaj
86cfca3eae
boards/nucleo-l4z5zi: add command for flashing using cpy2remed
2022-06-30 08:30:51 -04:00
Marian Buschsieweke
fcbba02daf
Merge pull request #18256 from Teufelchen1/chore/macos
...
Documentation: Renaming OS X to macOS
2022-06-30 07:05:48 +02:00
krzysztof-cabaj
53f33b32fa
boards/nucleo-l496zg: add short board info and flashing commands
2022-06-29 12:35:48 -04:00
krzysztof-cabaj
056ffbf42d
boards/nucleo-f303ze: add cpy2remed flashing commands
2022-06-27 09:56:36 -04:00
krzysztof-cabaj
162676be3d
boards/nucleo-f207zg: add cpy2remed flashhing commands
2022-06-27 08:19:10 -04:00
Teufelchen1
1231807bab
Documentation: Renaming OS X to macOS
2022-06-23 17:25:48 +02:00
krzysztof-cabaj
1e8c7980e3
boards/common/adruino-atmega: fix issue with wrong port for LED0
2022-06-23 09:06:08 -04:00
Marian Buschsieweke
95df0e8315
Merge pull request #18238 from gschorcht/boards/esp32/cleanup_board_init_common
...
boards/esp32: cleanup board_init_common
2022-06-22 13:53:15 +02:00
Gunar Schorcht
d00c6b0e3c
boards/esp32: cleanup board_init_common
...
board_init_common isn't needed any longer.
2022-06-21 16:21:10 +02:00
Marian Buschsieweke
e3f5ba90fd
boards/{thingy52,ruuvitag}: allow OpenOCD as programmer
2022-06-21 15:04:13 +02:00
benpicco
1e87e3f904
Merge pull request #18225 from krzysztof-cabaj/doc-nucleo32
...
boards/nucleo32: doc update - usage of cpy2remed programmer and short overview of board
2022-06-21 11:25:52 +02:00
benpicco
1638606c5c
Merge pull request #18218 from gschorcht/boards/esp32/cleanup_ci_compilation
...
boards/esp32: cleanup CI compilation for esp_wifi_enterprise
2022-06-19 17:01:13 +02:00
krzysztof-cabaj
49d8b0a892
boards/nucleo32: fix static test issues
2022-06-17 03:41:22 -04:00
krzysztof-cabaj
fdc7d655ea
boards/nucleo-l412kb: add board short description and flashing command
2022-06-17 03:21:40 -04:00
krzysztof-cabaj
606df51111
boards/nucleo: change all memory size to KiB
2022-06-16 12:46:42 -04:00
krzysztof-cabaj
c378f9dec0
boards/nucleo-l011k4: add board short descritpion and flashing command
2022-06-16 12:30:16 -04:00
Gunar Schorcht
54c1cd673e
boards/esp32-wrover-kit: revert changes in commit b74c456
...
In the board definition of `esp32_wrover_kit` default values for `ESP_WIFI_EAP_USER` and `ESP_WIFI_EAP_PASS` had to be defined because this board was used in the CI to compile the optional module `esp_wifi_enterprise`. Now that the CI compilation for the `esp_wifi_enterprise` module is realized by an external board definition `esp32-ci`, these default values should be removed to make the compilation fail if the user did not define these variables.
2022-06-16 14:11:58 +02:00
krzysztof-cabaj
27baf67b16
boards/nucleo-f042k8: add short info about board and flashing command
2022-06-15 04:31:55 -04:00
krzysztof-cabaj
18f3b1d31c
boards/nucleo-f031k6: add board overview and info about flashing
2022-06-15 04:18:40 -04:00
Benjamin Valentin
43d752f677
boards/samd20-xpro: add definition for UART on EXT2
...
We can't use PB13/PB12 which would be the 'standard' UART pins on
the -xpro EXT connectors since only SERCOM4 can map to those - and
that's already used on EXT1.
So use the adjacent PA08/PA09 with SERCOM0.
2022-06-09 14:16:27 +02:00
Marian Buschsieweke
2bf39e1aca
boards/common/nrf52: fix compilation of thingy52 and ruuvitag
2022-06-08 12:38:23 +02:00
Marian Buschsieweke
f256e48159
Merge pull request #18168 from maribu/boards/common/programmer
...
boards/common/{nrf52,cc26xx_cc13xx}: improve default programmer selection
2022-06-08 10:15:17 +02:00
Marian Buschsieweke
ed83aa3883
boards/common/cc26xx_cc13xx: improve default PROGRAMMER setting
...
Only default to uniflash as default programmer if UNIFLASH_PATH is
set. If this isn't the case, `make flash` fails complaining about
missing `UNIFLASH_PATH` anyway.
2022-06-07 16:45:14 +02:00
Marian Buschsieweke
6d39b3c993
boards/common/nrf52: only default PROGRAMMER to jlink if installed
2022-06-07 16:45:13 +02:00
Marian Buschsieweke
bf55069612
boards/msba2: provide TTY_BOARD_FILTER
2022-06-07 09:18:58 +02:00
Marian Buschsieweke
0f492ba9b0
boards/nrf52dk: provide TTY_BOARD_FILTER
2022-06-07 09:16:06 +02:00
Marian Buschsieweke
22358748c4
boards/same54-xpro: provide TTY_BOARD_FILTER
2022-06-03 19:59:31 +02:00
Marian Buschsieweke
ca278d42a4
boards/samr21-xpro: provide TTY_BOARD_FILTER
2022-06-03 19:59:31 +02:00
Marian Buschsieweke
e46a2dc29f
boards/nrf52840dk: provide TTY_BOARD_FILTER
2022-06-03 19:59:31 +02:00
Marian Buschsieweke
8d63b63e7a
boards/common/nucleo: provide TTY_BOARD_FILTER
2022-06-03 19:59:31 +02:00
Marian Buschsieweke
b986279350
boards/common/cc26xx_cc13xx: provide TTY_BOARD_FILTER
2022-06-03 19:59:31 +02:00
benpicco
dd6b473a0f
Merge pull request #18138 from benpicco/makefiles/boot/riotboot-elffile
...
makefiles/boot/riotboot: set DEBUG_ELFFILE to slot0.elf
2022-06-02 16:10:09 +02:00
benpicco
e1e2b7c5b6
Merge pull request #17601 from gschorcht/cpu/esp32/upgrade_esp-idf_v4.4
...
cpu/esp32: Upgrade to ESP-IDF v4.4
2022-06-02 10:18:07 +02:00
Gunar Schorcht
1d914d1496
boards/esp32: changes for ESP-IDF v4.4
2022-06-01 13:21:29 +02:00
benpicco
4b6da5c8e4
Merge pull request #17863 from benpicco/sam0_sdhc
...
cpu/samd5x: add SD Host Controller implementation
2022-05-31 15:33:24 +02:00
Benjamin Valentin
1111631c45
makefiles/tools: define DEBUG_ELFFILE and use it for debugging
2022-05-31 12:39:16 +02:00
Benjamin Valentin
b97359ea71
boards/same54-xpro: configure FAT on SD card
2022-05-31 11:07:20 +02:00
benpicco
874a7e1533
Merge pull request #18057 from krzysztof-cabaj/cpy2remed-new-boards
...
boards/nucleo-X: enable cpy2remed programmer
2022-05-24 11:34:33 +02:00
Martine Lenders
37db22edea
Merge pull request #18124 from miri64/release-tests/fix/install-libasan
...
release-tests: install libasan as native dependency
2022-05-23 12:20:31 +02:00
Martine Lenders
c36a56cacc
native: doc: add libasan5 dependency
2022-05-23 12:02:46 +02:00
chrysn
dc7bc9f854
Merge pull request #17683 from chrysn-pull-requests/mtd-granularity
...
mtd: Introduce write granularity
2022-05-20 11:52:03 +02:00
krzysztof-cabaj
0c2d257b67
boards/nucleo: cpy2remed enabled
2022-05-18 06:30:39 -04:00
29c7e6c0bf
boards/iotlab-m3: fix mixed sensors in implementation status
2022-05-18 08:58:34 +02:00
Francisco
2e1cd2a517
Merge pull request #18071 from benpicco/boards/native-weak_vfs_default
...
boards/native: allow to overwrite default fs
2022-05-17 10:41:41 +02:00
e26ae5c981
boards/native: split out asan CFLAGS_ASAN, LINKFLAGS_ASAN
2022-05-11 21:49:27 +02:00
Benjamin Valentin
5b4c7cbf1e
boards/native: allow to overwrite default fs
2022-05-08 23:21:37 +02:00
benpicco
dd2d8a464a
Merge pull request #18041 from krzysztof-cabaj/stm32f469i-disco-LEDs
...
boards/stm32f469i-disco: LEDX_ON LEDX_OFF mismatch
2022-05-02 12:16:25 +02:00
benpicco
bb8313a047
Merge pull request #18039 from krzysztof-cabaj/stm32f469i-disco-cpy2remed
...
boards/stm32f469i-disco: enable cpy2remed programmer
2022-05-02 12:15:48 +02:00
krzysztof-cabaj
3f49e9b17a
boards/stm32f469i-disco: LEDX_ON LEDX_OFF mismatch fix
2022-05-02 05:06:00 -04:00
krzysztof-cabaj
94a103f756
boards/stm32f469i-disco: doc improvments
2022-04-30 11:45:51 -04:00
krzysztof-cabaj
f6de04bd19
enable cpy2remed programmer
2022-04-29 14:29:28 -04:00
9821e556ac
Merge pull request #17949 from fjmolinas/pr_native_can_improovements
...
native/periph_can: usability improvements and documentation updates
2022-04-25 17:52:16 +02:00
Francisco Molina
50f9c14ded
boards/native: add PERIPH_CAN_FLAGS to specifiy vcan iface
2022-04-25 12:48:10 +02:00
56359d6fb1
Merge pull request #17930 from aabadie/pr/drivers/lcd_rotation_rework
...
drivers/lcd: rework rotation management and enable it for st7735
2022-04-21 14:31:49 +02:00
Francisco Molina
0d7eb36247
boards/native: only one CAN_DLL by default
2022-04-20 14:40:06 +02:00
Daniel Lockau
879e082703
cpu/native: use socketcan pkg
2022-04-20 11:55:29 +02:00
d992a18c76
boards: adapt configuration with new rotation mode defines
2022-04-19 16:22:11 +02:00
646fb1135a
Merge pull request #17925 from aabadie/pr/drivers/lcd_params_rework
...
drivers/lcd: slightly rework params to expose offset values to ili9341 driver
2022-04-19 16:21:42 +02:00
718b1e350d
Merge pull request #17459 from aabadie/pr/drivers/cst816s_enh
...
drivers/cst816s: add touch_dev interface + add Kconfig + migrate to ztimer
2022-04-19 11:43:34 +02:00
12758b94fc
Merge pull request #17954 from aabadie/pr/boards/stm32f750n8-dk
...
boards/stm32f750n8-dk: add support
2022-04-15 15:05:55 +02:00
benpicco
51085a7ad9
Merge pull request #17948 from fjmolinas/pr_nucleo_f401re_riotboot
...
boards/nucleo-f401re: add riotboot
2022-04-15 06:59:21 +02:00
c9afd2a94e
boards: add support for stm32f7508-dk
2022-04-14 21:43:57 +02:00
Francisco Molina
11352197b6
boards/nucleo-f401re: add riotboot
2022-04-14 15:17:31 +02:00
2d33b5f3a5
boards/pinetime: pull-in cst816s with touch_dev
2022-04-14 11:31:36 +02:00
d060f47d58
boards/adafruit-clue: fix display rotation mode
2022-04-13 12:55:16 +02:00
4af29ab549
boards/adafruit-pybadge: enable ST7735 display
2022-04-13 08:45:16 +02:00
6df46ecc91
boards: adapt ili9341 default config where needed
2022-04-12 12:39:00 +02:00
Benjamin Valentin
8081312a2f
boards/samr34-xpro: configure second timer & uart
2022-04-11 18:13:49 +02:00
Benjamin Valentin
760b7f5057
boards/samr34-xpro: make use of helper macros
2022-04-11 18:01:29 +02:00
Oleg Hahm
abd5024d30
Merge pull request #17877 from krzysztof-cabaj/doc-board-nucleo-f334r8
...
boards/nucleo-f334r8: improvements to documentation
2022-04-08 14:06:56 +02:00
krzysztof-cabaj
3c672b8946
boards/nucleo-f334r8: improvments to documentation
2022-04-04 11:38:20 -04:00
chrysn
35b57af065
boards/native: Configure write_size in MTD device
2022-03-31 10:58:48 +02:00
Dario Petrillo
ce31f840b1
boards/b-l4753-iot0a1: Add SPI2 and SPI3 buses
...
SPI2 is exposed on the PMOD connector, SPI3 is used internally to
communicate with the radio modules onboard
2022-03-30 10:52:53 +02:00
benpicco
9ca3dd5d4b
Merge pull request #17656 from benpicco/vfs_default-test
...
vfs_default: add compile test and add default mount for more boards
2022-03-29 13:47:08 +02:00
Francisco
52f12e0734
Merge pull request #17711 from benpicco/periph_init_buttons
...
drivers/periph_common: add periph_init_buttons to init on-board buttons
2022-03-29 10:29:39 +02:00
Benjamin Valentin
a652bea27e
boards/native: use default mount point
2022-03-29 10:24:01 +02:00
Benjamin Valentin
2d352306ea
boards/same54-xpro: use default mount point
2022-03-29 10:24:01 +02:00
Benjamin Valentin
0bbcc4d924
boards/nrf52840dk: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
53756e24cb
boards/weact-f4x1cx: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
a866a745b5
boards/iotlab-m3: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
e57fd0888e
boards/mcb2388: configure FAT on SD card
2022-03-29 10:24:01 +02:00
Benjamin Valentin
086fe35951
boards/msba2: configure FAT on SD card
2022-03-29 10:24:01 +02:00
krzysztof-cabaj
30f72c15df
boards/nucleo-f429zi/doc: improvements to documentation
2022-03-28 06:55:49 -04:00
Michel Rottleuthner
ecce95cacb
boards/pba-d-01-kw2x: init modem clock in post_startup to precede cpu_init
2022-03-24 16:28:22 +01:00
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
Francisco Molina
1f5a96deea
boards/arduino-mega2560: add ztimer adjust paramters
2022-03-22 15:20:31 +01:00
Francisco Molina
2bb6bc1b1b
boards/z1: update ztimer adjust params
2022-03-22 15:05:13 +01:00
9311139ad2
boards: add support for nucleo-f439zi
2022-03-21 08:11:00 +01:00
1de688c352
boards/nucleo-f429zi: add support for ethernet
2022-03-18 16:07:57 +01:00
7501098a8a
Merge pull request #17819 from aabadie/pr/cpu/samd51_adc_enh
...
cpu/samd51: allow to support ADC0 and ADC1 in the same configuration
2022-03-18 14:09:00 +01:00
565af3d56a
boards/adafruit-pybadge: extend and fix ADC configuration
2022-03-18 09:37:31 +01:00
Gunar Schorcht
327a4a58b2
boards: add ST L3Gxxxx 3-axis gyro family
2022-03-18 06:34:54 +01:00
562cc9bba8
boards/samd51: adapt ADC configuration
2022-03-17 11:45:06 +01:00
11cf422b66
boards/adafruit-pybadge: add support
2022-03-16 17:23:50 +01:00
