Marian Buschsieweke
e5cb676dfe
Merge pull request #20286 from chrysn-pull-requests/nrf52dk-arduino
...
boards/nrf52dk: Minimal Arduino pinout support
2024-01-23 05:27:23 +00:00
chrysn
7452a61e64
fixup! boards/nrf52dk: Minimal Arduino pinout support
2024-01-23 01:12:06 +01:00
chrysn
b0a46c2eba
boards/nrf52dk arduino: Declare SPI (side SPI) support
2024-01-23 00:39:03 +01:00
chrysn
ecfa2f7573
boards/nrf52dk: Minimal Arduino pinout support
2024-01-22 23:44:16 +01:00
Marian Buschsieweke
63ec7fc7b5
Merge pull request #19835 from maribu/msp430
...
cpu/msp430: rework MSP430 x1xx periph drivers
2024-01-22 18:41:23 +00:00
Marian Buschsieweke
407deabc0f
boards/olimex-msp430-h1611: uart_stdio @ 9600 Bd
2024-01-22 16:59:23 +01:00
Marian Buschsieweke
675dcc381c
cpu/msp430: rework MSP430 x1xx periph drivers
...
- Move common code for USART (shared SPI / UART peripheral) to its
own file and allow sharing the USART peripheral to provide both
UART and SPI in round-robin fashion.
- Configure both UART and SPI bus via a `struct` in the board's
`periph_conf.h`
- this allows allocating the two UARTs as needed by the use case
- since both USARTs signals have a fixed connection to a single
GPIO, most configuration is moved to the CPU
- the board now only needs to decide which bus is provided by
which USART
Note: Sharing an USART used as UART requires cooperation from the app:
- If the UART is used in TX-only mode (no RX callback), the driver
will release the USART while not sending
- If the UART is used to also receive, the application needs to power
the UART down while not expecting something to send. An
`spi_acquire()` will be blocked while the UART is powered up.
2024-01-22 16:59:23 +01:00
Marian Buschsieweke
504c169346
Merge pull request #20270 from maribu/boards/gd32vf103c-start
...
boards/gd32vf103c-start: new board
2024-01-20 16:11:31 +00:00
Marian Buschsieweke
c6c5d9a1a7
boards/common/gd32v: reorder members in initialization
...
C has this feature that the order of struct members in the
initialization doesn't need to match the order in the declaration.
C++ has not yet caught up:
boards/common/gd32v/include/cfg_usbdev_default.h:50:1: error: designator order for field 'dwc2_usb_otg_fshs_config_t::type' does not match declaration order in 'const dwc2_usb_otg_fshs_config_t'
So, just reorder the fields for now by hand.
2024-01-20 16:42:49 +01:00
Marian Buschsieweke
7f27e6cc7f
boards/gd32vf103c-start: new board
...
This adds support for the GD32VF103C-START, the official "starter board"
for the GD32VF103C MCU by the MCU vendor.
2024-01-19 23:17:35 +01:00
Marian Buschsieweke
9fbb23b167
boards/common/gd32v: make common OpenOCD config opt-in
...
Let boards explicitly use the common OpenOCD config if it works for
them, rather than having boards with specific needs opt out.
2024-01-19 23:17:35 +01:00
benpicco
912294912a
Merge pull request #20264 from benpicco/boards/native-term_fix
...
boards/native: only use pyterm wrapper with term target
2024-01-19 14:31:39 +00:00
Benjamin Valentin
e5618f705b
boards/native: set and test for pyterm explicitly
2024-01-19 14:42:03 +01:00
Marian Buschsieweke
c4fbcfad21
boards/e180-zg120b-tb: Document correct pin mapping
...
Revision 10199-V1.0 of the board has an incorrect pin labeling on the
silkscreen, presumably because the board was initially developed
for a different E180 module and the silkscreen was not updated when
populated with a different E180 module.
It is very likely that if newer revisions of the test board get
produced, they will use the same very systematical routing as revision
1.0 and only the silkscreen labeling will be fixed. Hence, documenting
the correct pin mapping will be useful even for newer revisions.
2024-01-18 13:52:36 +01:00
Marian Buschsieweke
f22fc0080b
boards/common/gd32v: Allow overwriting OPENOCD_TRANSPORT
2024-01-17 09:16:26 +01:00
Benjamin Valentin
3c31000a61
boards/native: only use pyterm wrapper with term target
2024-01-16 15:15:06 +01:00
Marian Buschsieweke
f5a9e084c9
boards/e180-zg120b-tb: add support for OpenOCD
2024-01-13 12:03:15 +01:00
Benjamin Valentin
235d3f059c
boards/samd2x-xpro: enable riotboot
2024-01-11 14:38:35 +01:00
Gunar Schorcht
517cbc59ff
boards/esp32-wrover-kit: add SDMMC support
2024-01-05 07:22:27 +01:00
Gunar Schorcht
7ba9cbe736
boards/esp32-olimex-evb: add SDMMC support
2024-01-05 07:22:27 +01:00
Gunar Schorcht
a376b3c915
boards/common/esp32x: add sanity check for SPI in case SDMMC is used
2024-01-05 07:22:27 +01:00
Gunar Schorcht
c4de343577
board/esp32-mh-et-live-minikit: improve the use of SPI SD Card module
2024-01-05 07:22:27 +01:00
Gunar Schorcht
5646cc02e4
boards/common/esp32x: add SDMMC support
2024-01-05 07:22:27 +01:00
Marian Buschsieweke
866f2a00c0
Merge pull request #20226 from maribu/boards/generic-cc2538-cc2592-dk
...
boards/generic-cc2538-cc2592-dk: add board support
2024-01-05 00:35:11 +00:00
Marian Buschsieweke
947d05ed77
boards/generic-cc2538-cc2592-dk: add board support
...
The CC2538-CC2592-DK is one of the few readily available and
affordable boards featuring a legacy CC2538 MCU. This should make
maintaining RIOT support for that legacy MCU more affordable :-)
2024-01-05 00:00:48 +01:00
benpicco
a04167004f
Merge pull request #20225 from MrKevinWeiss/pr/nucleo413/dmafix
...
boards/nucleo-f413zh: Fix DMA mapping
2024-01-03 14:07:37 +00:00
MrKevinWeiss
9f04b78c2e
boards/nucleo-f413zh: Fix DMA mapping
2024-01-03 14:20:20 +01:00
Marian Buschsieweke
f860d96a25
Merge pull request #19891 from chrysn-pull-requests/ws2181x_timer
...
drivers/ws281x: Add gpio_ll and timer based driver
2024-01-03 09:22:26 +00:00
Marian Buschsieweke
0aa87aa242
Merge pull request #20215 from benpicco/tests/native-term
...
makefiles/tests/tests.inc.mk: use native term for tests
2024-01-02 10:35:36 +00:00
krzysztof-cabaj
3326b0cd5b
boards/nucleo: fix typo - or RAM
2024-01-01 13:07:49 +01:00
benpicco
7c2f091b39
Merge pull request #19540 from gschorcht/cpu/stm32/periph/sdmmc
...
cpu/stm32/periph: add low-level SDMMC peripheral driver
2023-12-23 21:25:59 +00:00
Oleg Hahm
59b687cf68
boards/native: forward eeprom flags to pyterm
2023-12-23 20:27:47 +01:00
Gunar Schorcht
b3f3e16771
boards/stm32f7508-dk: add SDMMC support
2023-12-23 17:18:37 +01:00
Oleg Hahm
c0e71b0592
Merge pull request #20172 from OlegHahm/pr/pyterm_native_pipe
...
pyterm: add native support
2023-12-21 23:08:22 +00:00
Gunar Schorcht
2c2e70fb17
boards/stm32l496g-disco: add SDMMC support
2023-12-21 18:37:43 +01:00
Gunar Schorcht
ae4ba633d9
boards/stm32f746g-disco: add SD Card interface support
2023-12-21 18:37:43 +01:00
krzysztof-cabaj
d8423cb4d6
boards/nucleo-l452re: fix typo
2023-12-20 19:48:43 +01:00
krzysztof-cabaj
fb07cc054a
boards/nucleo-l452re: doc update
2023-12-20 16:56:01 +01:00
MrKevinWeiss
6a0b1c59c5
boards/nrf9160dk: Override WS281X_TIMER_*
2023-12-19 11:13:45 +01:00
MrKevinWeiss
fb5ebea1a5
boards/common/e104-bt50xxa-tb: Override WS281X_TIMER_*
2023-12-19 11:13:44 +01:00
MrKevinWeiss
0d31432cb3
boards/nrf51: Defined TIMER_x_MAX_VALUE
2023-12-19 11:13:44 +01:00
chrysn
d32c32ffae
boards/nrf52: Defined TIMER_x_MAX_VALUE
...
The macro's presence is documented in `timer_init`, but was missing from
this platform.
2023-12-19 11:13:41 +01:00
Oleg Hahm
dd184614d8
pyterm: native: remove superfluous tap argument
2023-12-18 20:00:44 +01:00
Oleg Hahm
075f2ffd6a
pyterm: label pyterm arg for native generically
2023-12-18 20:00:44 +01:00
Oleg Hahm
273486be78
examples: tests: unify native arguments for ZEP
2023-12-18 20:00:44 +01:00
Oleg Hahm
2b779fc5a9
native: only set TERMFLAGS for pyterm
...
If TERMPROG is unset the default is pyterm. If TERMPROG is pyterm we
need to set the native flag.
2023-12-18 13:44:20 +01:00
Oleg Hahm
66343e3bc7
pyterm: add native support
...
Start RIOT native as a subprocess and communicate to it via a pipe.
2023-12-18 13:44:20 +01:00
Dylan Laduranty
75c27f8c31
Merge pull request #20183 from benpicco/boards/same54-xpro-uart_hw_fc
...
boards/same54-xpro: configure pins for UART HW flow control & ethernet LED
2023-12-14 19:55:08 +00:00
Benjamin Valentin
8db01f6df1
boards/same54-xpro: configure orange ethernet LED
...
There is a software controlled LED on the RJ45 connector.
Export it via SAUL.
2023-12-14 15:21:54 +01:00
Benjamin Valentin
fb6e3c01c7
boards/same54-xpro: configure pins for UART HW flow control
2023-12-14 15:07:10 +01:00
