17612: pkg: add FlashDB r=benpicco a=benpicco
19332: sys/tiny_strerror: make use of flash_utils.h r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19292: sys/phydat: Fix unit confusion r=miri64 a=maribu
### Contribution description
Previously, `UNIT_G` was used for g-force with the correct symbol `g`, `UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs` (which is an alternative correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition, gram now uses the correct symbol `g`; which sadly is the same as for g-force. But usually there is enough context to tell them apart.
### Testing procedure
Green CI
### Issues/PRs references
None
19307: nanocoap_link_format: fix off-by-one error r=miri64 a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18746: sys/clif: Fixing out of bounds read under certain conditions r=maribu a=Teufelchen1
Hi 😈
This fixes a potential out of bounds read in clif_encode_link. There is no code in RIOT that can be exploited.
The fix does not break the current API but alters the behaviour slightly. Before the change, the length attributes of `clif_attr_t` where optional. If missing, the length was deduced using `strlen()`. This fix makes those parameters required and if they are `0` it operates as if the length really is `0`. This might not be ideal but it is the only non api breaking fix I could think off.
```c
typedef struct {
char *value;
unsigned value_len; NO LONGER OPTIONAL
const char *key;
unsigned key_len; NO LONGER OPTIONAL
} clif_attr_t;
```
Depends on #18744
cc `@leandrolanzieri`
19161: bors.yaml: re-activate labels check + add block_labels r=miri64 a=miri64
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
Previously, `UNIT_G` was used for g-force with the correct symbol `g`,
`UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which
would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs`
(which is an uncommon but correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been
renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition,
gram now uses the correct symbol `g` and Gauss uses `G`.
19297: tests/rmutex: clean up test and reduce stack size r=maribu a=maribu
### Contribution description
As the title says. This results in a few more boards being able to run the test.
Also, the wording in the README.md is improved to not be interpreted as generally threads with lower thread ID being preferred over threads with higher when locking a mutex.
### Testing procedure
```
make -C tests/rmutex BOARD=foo flash test
```
### Issues/PRs references
Fixes https://github.com/RIOT-OS/RIOT/issues/19140
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
18392: drivers/servo: reimplement with high level interface r=benpicco a=maribu
### Contribution description
The previous servo driver didn't provide any benefit over using PWM directly, as users controlled the servo in terms of PWM duty cycles. This changes the interface to provide a high level interface that abstracts the gory PWM details.
In addition, a SAUL layer and auto-initialization is provided.
### Testing procedure
The test application provides access to the servo driver via the `saul` shell command.
```
> saul
2022-08-02 22:12:31,826 # saul
2022-08-02 22:12:31,827 # ID Class Name
2022-08-02 22:12:31,830 # #0 ACT_SWITCH LD1(green)
2022-08-02 22:12:31,832 # #1 ACT_SWITCH LD2(blue)
2022-08-02 22:12:31,834 # #2 ACT_SWITCH LD3(red)
2022-08-02 22:12:31,837 # #3 SENSE_BTN B1(User button)
2022-08-02 22:12:31,838 # #4 ACT_SERVO servo
> saul write 4 0
2022-08-02 22:12:41,443 # saul write 4 0
2022-08-02 22:12:41,445 # Writing to device #4 - servo
2022-08-02 22:12:41,447 # Data: 0
2022-08-02 22:12:41,450 # [servo] setting 0 to 2949 (0 / 255)
2022-08-02 22:12:41,453 # data successfully written to device #4
> saul write 4 256
2022-08-02 22:12:45,343 # saul write 4 256
2022-08-02 22:12:45,346 # Writing to device #4 - servo
2022-08-02 22:12:45,347 # Data: 256
2022-08-02 22:12:45,351 # [servo] setting 0 to 6865 (255 / 255)
2022-08-02 22:12:45,354 # data successfully written to device #4
```
Each write resulted in the MG90S servo that I connected to move to the corresponding position.
### Issues/PRs references
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
The previous servo driver didn't provide any benefit over using PWM
directly, as users controlled the servo in terms of PWM duty cycles.
This changes the interface to provide a high level interface that
abstracts the gory PWM details.
In addition, a SAUL layer and auto-initialization is provided.
Co-authored-by: benpicco <benpicco@googlemail.com>
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19256: pkg/tinyusb: add GD32VF103 support r=gschorcht a=gschorcht
### Contribution description
This PR provides the tinyUSB support for GD32VF103 and enables the `tinyusb_device` feature as well as `stdio_tinyusb_cdc_acm` for GD32VF103 boards.
### Testing procedure
```
BOARD=sipeeed-longan-nano make -C tests/shell flash term
```
should work
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
* riot-wrappers:
* Fix infinite loop when using a Mutex
* Make ValueInThread Copy/Clone
* riot-sys:
* Export xxx_DEV (eg. I2C_DEV) C macros as functions
* Add auto_init_utils.h
19284: boards: support for the LILYGO TTGO T8 ESP32-S2 board r=benpicco a=gschorcht
### Contribution description
This PR provides the support for the LILYGO TTGO T8 ESP32-S2 board which has a OLED display (not yet supported) and a SD-Card slot on board.
The board is equipped with a USB-C connector that connects either to a USB-to-UART bridge or to the USB-OTG/JTAG interface of the ESP32-S2 via some DIP switches.
The PR includes a very small fix of printf format string in `tests/malloc`. I can split it off.
### Testing procedure
t.b.d.
### Issues/PRs references
19286: cpu/esp_common: use generic WIFI_SSID/WIFI_PASS defines r=benpicco a=benpicco
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19258: drivers/mtd_flashpage: implement pagewise API, don't use raw addresses r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
There are boards that select the STDIO backend used depending on whether `usbus` is enabled. Usually the `fido2_ctap_transport_hid` module pulls in `usbus_hid` and thus `usbus`, but since this dependency resolution is done after reading the `Makefile.dep` of the board, it may happen that the wrong STDIO backend is selected. Therefore `usbus` is selected directly in the `Makefile`.
17045: sys/coding: add XOR based coding module r=benpicco a=benpicco
19243: cpu/gd32v: add periph_gpio_ll and periph_gpio_ll_irq support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_gpio_ll` and `periph_gpio_ll_irq` support for GD32VF103. Level triggered interrupts are emulated.
`periph_gpio_ll_irq` could be split off from this PR as a separate PR if necessary.
### Testing procedure
Use any GD32V board and connect PA0 -> PB0 and PA1 -> PB1 where PA is the output port and PB the input port. With these connections `tests/periph_gpio_ll` should work.
```
BOARD=sipeed-longan-nano make -j8 -C tests/periph_gpio_ll flash term
```
If necessary, change the input and output pins by setting the environment variables and connect the corresponding pins, for example for `seeedstudio-gd32` PA1 -> PB8 and PA8 -> PB9:
```
PIN_OUT_0=1 PIN_OUT_1=8 PIN_IN_0=8 PIN_IN_1=9 BOARD=seedstudio-gd32 make -j8 -C tests/periph_gpio_ll flash term
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19251: tests/driver_dac_dds: fix output of sine and saw functions r=benpicco a=benpicco
19254: cpu/gd32v: add periph_rtc_mem support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_rtc_mem` support for GD32VF103.
A modified version of this driver could also be used for STM32F1.
### Testing procedure
`tests/periph_rtt` should work on any GD32V board, for example:
```
BOARD=sipeed-longan-nano make -C tests/periph_rtt flash
```
```
Help: Press s to start test, r to print it is ready
START
main(): This is RIOT! (Version: 2023.04-devel-319-gebc86-cpu/gd32v/periph_rtc_mem)
RIOT RTT low-level driver test
RTT configuration:
RTT_MAX_VALUE: 0xffffffff
RTT_FREQUENCY: 32768
Testing the tick conversion
Trying to convert 1 to seconds and back
Trying to convert 256 to seconds and back
Trying to convert 65536 to seconds and back
Trying to convert 16777216 to seconds and back
Trying to convert 2147483648 to seconds and back
All ok
Initializing the RTT driver
RTC mem OK
This test will now display 'Hello' every 5 seconds
RTT now: 1
Setting initial alarm to now + 5 s (163841)
rtt_get_alarm() PASSED
RTC mem OK
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
