Vincent Dupont
a1f482cbf7
cpu/sam0: use const pointer in flashpage
2018-03-14 16:28:33 +01:00
Vincent Dupont
b40249153d
cpu/nrf5x: use const pointer in flashpage
2018-03-14 16:28:33 +01:00
Vincent Dupont
5a2a4cf1e0
cpu/msp430: use const pointer in flashpage
2018-03-14 16:28:32 +01:00
Vincent Dupont
4f44778a42
cpu/efm32: use const pointer in flashpage
2018-03-14 16:28:32 +01:00
Joakim Nohlgård
078104223a
Merge pull request #8732 from girtsf/cortexm-fix-no-mpu
...
cortexm_common: don't try to set MEMFAULTENA on ARMv6-M
2018-03-13 21:06:21 +01:00
06392bbfd3
cpu/stm32f1: add flashpage_raw support
2018-03-13 16:30:04 +01:00
4f7dc1ae41
cpu/stm32f0: add flashpage_raw support
2018-03-13 16:30:04 +01:00
4e1f2b5d38
cpu/stm32l1: add flashpage support
2018-03-13 16:30:04 +01:00
4972f952d4
cpu/stm32l0: add flashpage support
2018-03-13 16:30:04 +01:00
67190a31ef
cpu/stm32_common: unify flashpage support
2018-03-13 16:30:04 +01:00
Girts Folkmanis
b9744f698f
cortexm_common: don't try to set MEMFAULTENA on ARMv6-M
...
Before this change, if one tried to build a Cortex-M0+ target that had
an MPU, compilation would fail due to missing
'SCB_SHCSR_MEMFAULTENA_Msk' in SCB structure. Cortex-M0+ is a ARMv6-M
arch (unlike most other targets that have MPU support). ARMv6-M has more
limited support for fault conditions, see ARMv6-M Architecture Reference
Manual, D3.6.2.
2018-03-12 19:57:29 -07:00
Aurelien Fillau
0368239a63
cpu/stm32l0: power management updated
...
Now, MCU is able to go in stop mode if necessary when
periph_pm feature is activated.
Regarding LPSDSR bit that deactivates or not regulator in stop
mode, it is up to the user to set/clear this bit. In order
to save power, voltage regulator can be set in low power state
during stop mode but it increases wakeup time.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2018-03-11 11:01:25 +01:00
d025de32ed
Merge pull request #8351 from kaspar030/introduce_iolists
...
net: Introduce iolists
2018-03-07 09:56:13 +01:00
fcb451b2c5
Merge pull request #8743 from dylad/saml21_fix_rtc_define
...
cpu/saml21: fix RTC wrong condition for #if
2018-03-07 07:41:33 +01:00
dylad
20ac4b060d
cpu/saml21: fix RTC wrong condition for #if
2018-03-06 21:36:18 +01:00
Francisco Acosta
c922119fe4
Merge pull request #8744 from Josar/atmega_stackPointer
...
atmega: add last instruction print
2018-03-06 16:16:07 +01:00
7f150d6041
Merge pull request #7787 from OTAkeys/pr/stm32_pm_periph
...
cpu/stm32: add pm support in uart, spi and i2c (f4)
2018-03-06 16:34:44 +02:00
Hauke Petersen
e78b055787
Merge pull request #8556 from kaspar030/stm32_gpio_read
...
cpu: stm32_common: always do gpio_read() from input register
2018-03-06 15:30:01 +01:00
Vincent Dupont
857b44a975
cpu/stm32f4: add pm support in i2c driver
2018-03-06 15:13:02 +01:00
Vincent Dupont
34e8609f2c
cpu/stm32_common: add pm support in spi driver
2018-03-06 15:13:01 +01:00
Vincent Dupont
1aee2f1f14
cpu/stm32_common: add pm support in uart driver
2018-03-06 15:13:00 +01:00
Vincent Dupont
c01e8629ec
cpu/stm32_common: add PM modes
2018-03-06 15:12:58 +01:00
Josarn
d82f1eba4c
atmega: add last instruction print
...
Signed-off-by: Josua Arndt <josuaarndt@live.de>
2018-03-06 14:57:18 +01:00
58e172e4df
cpu/stm32_common: always enable PWR module
2018-03-06 14:55:32 +01:00
Hauke Petersen
c14b8081bc
Merge pull request #8735 from kaspar030/stm32_unify_cpu_init
...
cpu/stm32: unify cpu_init()
2018-03-06 14:09:13 +01:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
ff6b8aa4f1
cpu/native/netdev_tap: adapt to netdev with iolist
2018-03-06 14:00:31 +01:00
Francisco
0fd12487e1
cpu/stm32l4: add support for stm32l452re
2018-03-05 14:34:16 -03:00
3b42fb49b5
cpu/stm32: unify cpu_init()
2018-03-05 12:35:00 +01:00
Hauke Petersen
47a500d0b1
Merge pull request #8447 from haukepetersen/opt_test_periphuartpower
...
tests/periph_uart: included power_on/off() in test
2018-03-05 09:49:20 +01:00
Joakim Nohlgård
68ea6b3316
kinetis: Add support for NXP Kinetis KW41Z SoC
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
2090dd0234
kinetis: Add GPIO ISR for CPUs with combined PORTB+PORTC interrupt
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
8642c8ceb8
kinetis: Support CM0+ devices with 96 bit UID
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
005b4bfbb3
kinetis: Filter out PWM code if no FTM exists
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
11361ec7e1
kinetis: Add support for CPUs with a single IRQ for all PIT channels
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
2b64452c33
kinetis: GPIO workaround for missing open drain support
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
a196bb431d
kinetis: Only configure PWM settings if the FTM device exists
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
ba76402d03
kinetis: Add Bit Manipulation Engine helpers
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
18908667a3
kinetis: Make open drain GPIO availability depend on CPU header
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
a7f06f8c42
Merge pull request #8724 from gebart/pr/kinetis-lpuart-clocking
...
kinetis: Set LPUART clock source during uart_lpuart_init
2018-03-02 15:38:01 +01:00
Peter Kietzmann
215940b058
Merge pull request #8643 from Josar/jiminy_master
...
boards: Jiminy-mega256rfr2: initial support
2018-03-02 15:24:39 +01:00
Joakim Nohlgård
2bdf0bfbf1
kinetis: Align definitions in cpu_conf_kinetis.h
2018-03-02 14:39:00 +01:00
Joakim Nohlgård
82e960b642
kinetis: Set LPUART clock source during uart_lpuart_init
2018-03-02 14:39:00 +01:00
Josarn
3c906c6c3d
cpu/atmega256rfr2: ATmega256rfr2 MCU support
...
Signed-off-by: Josua Arndt <josuaarndt@live.de>
Signed-off-by: Steffen Robertz <steffen.robertz@online.de>
2018-03-02 13:33:53 +01:00
Josarn
3bace2bd24
cpu/atmega-common: Adjustments Jiminy-mega256rfr2
...
Signed-off-by: Josua Arndt <josuaarndt@live.de>
Signed-off-by: Steffen Robertz <steffen.robertz@online.de>
2018-03-02 13:33:26 +01:00
Francisco Acosta
2e701bd535
Merge pull request #8725 from gebart/pr/kinetis-errata-func
...
kinetis: Move errata workarounds to separate function
2018-03-02 12:30:16 +01:00
Francisco Acosta
a31940eee4
Merge pull request #8723 from gebart/pr/kinetis-periph-cpu-doc-fix
...
kinetis: periph_cpu.h doc fix
2018-03-02 12:03:06 +01:00
Hauke Petersen
4fd16b0bcc
cpu/native: add empty uart/power_x functions
2018-03-02 10:54:21 +01:00
Hauke Petersen
2fc724db7e
cpu/lpc2487: add empty uart/power_x functions
2018-03-02 10:53:55 +01:00
Hauke Petersen
8ac3465ba7
cpu/kinetis: add empty uart/power_x functions
2018-03-02 10:53:55 +01:00
Hauke Petersen
ce9e6f4eb0
cpu/atmega_common: add empty uart/power_x functions
2018-03-02 10:53:55 +01:00
Joakim Nohlgård
fd76e5ddad
kinetis: Move errata workarounds to separate function
2018-03-02 08:17:00 +01:00
Joakim Nohlgård
f5edf56be4
kinetis: periph_cpu.h doc fixes
2018-03-02 08:06:46 +01:00
Joakim Nohlgård
a11c66382f
kinetis: Add dependency on rtt for LPTMR time base
2018-03-02 07:37:14 +01:00
Bas Stottelaar
bcffbba480
Merge pull request #8718 from cladmi/pr/cpu/efm32/remove_timer_set
...
cpu/efm32/periph/timer: remove timer_set duplicate
2018-03-01 20:16:01 +01:00
Gaëtan Harter
04e180dd3d
Merge pull request #8719 from gebart/pr/kinetis-lpuart-align
...
kinetis: Align defines in uart.c
2018-03-01 17:58:37 +01:00
Gaëtan Harter
6f2eeca91b
cpu/efm32/periph/timer: remove timer_set duplicate
...
timer_set is already provided by 'periph_common' so does not need to be
provided by cpu/periph.
2018-03-01 17:31:15 +01:00
Joakim Nohlgård
8f3fb59840
kinetis: Align defines in uart.c
2018-03-01 17:12:54 +01:00
Joakim Nohlgård
d8c80e245a
kinetis: Fix shiftTooManyBitsSigned warning in GPIO driver
2018-03-01 14:35:22 +01:00
Sebastian Meiling
f5ef0bd09c
Merge pull request #8345 from danpetry/cc2538_uart
...
cc2538/include/periph_cpu.h: Changed UART configuration format for cc2538.
2018-03-01 12:02:59 +01:00
c450cdebeb
Merge pull request #8482 from cogip/qdec
...
drivers: Initial import of low-level QDEC driver interface
2018-02-26 17:44:58 +01:00
MichelRottleuthner
bad08596f6
Merge pull request #8399 from OTAkeys/fix/mtd_native_write
...
mtd_native: fix overlapping pages write check
2018-02-26 15:38:46 +01:00
Vincent Dupont
f04ecee9f6
mtd_native: fix overlapping pages write check
2018-02-26 15:32:06 +01:00
Gilles DOFFE
bee493ac71
cpu/stm32_common: add qdec implementation
...
* Add support for the STM32 encoder interface
* The STM32 only supports X2 and X4 modes.
* Enable interrupt handler on counter overflow
* Add simple test code for QDEC based on nucleo-f401 board
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 23:17:26 +01:00
Gilles DOFFE
07158755ea
cpu/native: add qdec implementation
...
* Add support for the native encoder interface
* Native QDEC is there mostly for simulation
* Calling code will have to simulate QDEC increment/decrement
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 23:16:42 +01:00
Joakim Nohlgård
d4e5bea0a3
efm32: Use different values for each unsupported ADC res
2018-02-23 09:36:57 +01:00
Bas Stottelaar
11638eb1d6
cpu: efm32: fix typo in cpus.txt
2018-02-22 15:38:13 +01:00
Bas Stottelaar
864839cb90
cpu/efm32: efm32lg: add support
2018-02-21 19:16:49 +01:00
Bas Stottelaar
1e3fdce1d7
cpu/efm32: efm32lg: add vendor headers
2018-02-21 19:16:49 +01:00
Sören Tempel
3ce89aeb04
cpu/sam3: fix build failure with TOOLCHAIN=llvm
2018-02-21 15:32:00 +01:00
Peter Kietzmann
e853c7534f
Merge pull request #8555 from kaspar030/stm32f4_fix_adc_res
...
cpu/stm32f4: fix periph/adc resolution check
2018-02-19 10:05:18 +01:00
Francisco Acosta
25c818bef0
cpu/efm32: fix flashpage_erase
2018-02-16 18:21:49 +01:00
Bas Stottelaar
a68f47eca1
cpu/efm32: efm32gg: add support.
2018-02-16 13:57:17 +01:00
Bas Stottelaar
f9f1b9ebfa
cpu/efm32: efm32gg: add vendor headers
2018-02-16 13:57:17 +01:00
Francisco Acosta
879e949967
Merge pull request #8572 from basilfx/bugfix/efm32_peripherals
...
cpu: efm32: fix ADC and RTC
2018-02-16 13:54:29 +01:00
Bas Stottelaar
2329b84935
cpu: efm32: fix ADC resolution selection
...
The `res` argument is a combination of resolution and shifting, combined using `(y << 4) | x`. To yield x, `0x0F` should have been used.
2018-02-15 21:14:09 +01:00
Bas Stottelaar
2af38d749c
cpu: efm32: fix RTC for Series 0 MCUs.
...
Without fix:
Setting alarm to 12627-11-30 15:00:05
Alarm is set to 12722-01-25 07:13:03
With fix:
Setting alarm to 2011-12-13 14:15:17
Alarm is set to 2011-12-13 14:15:17
2018-02-15 21:12:40 +01:00
Joakim Nohlgård
b61eeb9fe0
kinetis: Allow per-board config of ADC ref
...
ADC reference can be external pin or internal VREF module on most
Kinetis CPUs.
2018-02-14 15:16:41 +01:00
Bas Stottelaar
76ca2c9bb3
cpu: efm32: use static mutex initialization.
2018-02-14 09:30:08 +01:00
83bff5c643
cpu: stm32_common: always do gpio_read() from input register
2018-02-13 21:51:45 +01:00
41dab11a8f
cpu/stm32f4: fix periph/adc resolution check
2018-02-13 21:45:02 +01:00
Francisco Acosta
1b2ce2d559
Merge pull request #8544 from smlng/osx/cflags
...
cpu/native: reduce scope of CFLAGS for OSX compatibility
2018-02-13 14:29:54 +01:00
Francisco Acosta
ac9328381c
cpu/cortexm_common: add NOP after WFI to avoid hardfault on stm32l152
2018-02-12 15:10:34 +01:00
smlng
15a7e6bb98
cpu/native: reduce scope of CFLAGS for OSX compatibility
2018-02-09 17:44:41 +01:00
Vincent Dupont
972eeefe6e
stm32_common/rtt: add support for stm32f4
2018-02-08 17:39:39 +01:00
danpetry
cd449e388b
cpu/cc2538: Adapted UART driver incl. board config
...
Changed the style of the UART configuration for different boards,
from a define based configuration to one based on an array of
structs, one struct for each UART, with the format of the struct defined
in cc2538/include/periph_cpu.h.
- Defined the fields of the struct in periph_cpu.h
- Removed the compilation includes that were in uart.c for each UART
- Implemented a generic ISR subroutine for clarity
- combined uart_base and uart_init in uart.c
- used bitmask for the interrupt setup
- took the uart Rx, Tx, and IRQ numbers out of the config
(as this has to match the .dev field). Replaced with
macros from the uart number
- took out some unused code
- implemented power on/off commands
- removed reset function - now bytes are just discarded on error
- Rx now not initialised if Rx callback = NULL, as per
drivers/periph/uart.h
- device is now enabled after callbacks are set, not before
- asserts raised if rts and cts are enabled for UART0
- BIT macro removed
2018-02-08 14:36:51 +01:00
Francisco Acosta
bba457290e
Merge pull request #8525 from kaspar030/namespace_mcuboot
...
make: mcuboot: add MCUBOOT_ namespacing
2018-02-07 17:57:24 +01:00
7847a91e12
cpu: instead of cpp-style, use C-style comments
2018-02-06 16:59:58 +01:00
3bfe4b6986
make: mcuboot: add MCUBOOT_ namespacing
2018-02-06 16:41:48 +01:00
dylad
391164a788
pkg: fix broken nordic softdevice package
...
Prevent CPU from using cortexm_init() when softdevice is used for NRF52 devices
as the softdevice already do some obscur inits
Also ensure the softdevice pkg will be used by hacking Makefile due to RIOT's
build system limitations (will be fix later with the new build system)
2018-02-05 17:04:13 +01:00
Bas Stottelaar
6a112bdf51
Merge pull request #8474 from basilfx/feature/efm32_pwm_mode
...
cpu: efm32: implement pwm modes.
2018-02-05 12:56:02 +01:00
Hauke Petersen
b1efc39348
cpu/nrf52: optimized i2c driver implementation
2018-02-02 11:34:40 +01:00
Hauke Petersen
787d69c676
cpu/nrf52: add CPU specific sleep function
...
This function is supposed to be used for putting the CPU into
sleep mode for short amounts of time (e.g. in typical polling
loops used in periph drivers).
2018-02-02 11:33:18 +01:00
Hauke Petersen
959e838836
cpu/nrf52: updated vendor header
2018-02-02 11:33:18 +01:00
Peter Kietzmann
047219aff3
Merge pull request #8486 from haukepetersen/fix_nrf52_i2c-mutexinit
...
cpu/nrf52/i2c: use static mutex initializtion
2018-02-02 10:53:50 +01:00
Martine Lenders
c982cc81ed
Merge pull request #8278 from smlng/cpu/native/replace_timex
...
cpu, native: replace timex_t in syscalls
2018-02-01 12:55:29 +01:00
Bas Stottelaar
e4d699ad46
Merge pull request #8471 from cladmi/pr/fix_tradfri_module_name_conflict
...
cpu/efm32: fix 'cpu' module name conflict
2018-02-01 08:41:03 +01:00
Bas Stottelaar
91b2627539
cpu: efm32: implement pwm modes.
2018-01-31 23:39:42 +01:00
Hauke Petersen
503e60ef25
cpu/nrf52/i2c: use static mutex initializtion
2018-01-30 19:07:26 +01:00
Martine Lenders
c0dcff6dd0
Merge pull request #8421 from aabadie/pr/zep_doxygen_bis
...
sys/net/zep: add missing doxygen brief description
2018-01-30 17:34:09 +01:00
