This drops special handling for Mac OS (X) `native`, which is not
supported anymore anyway and causing issues when building for
non-`native` targets on Mac OS.
19368: debug: add DEBUG_BREAKPOINT() macro, set breakpoint on failed assertion r=benpicco a=benpicco
19529: cpu/stm32/periph/dac: optimize setting DAC r=benpicco a=Enoch247
### Contribution description
The current implmentation right shifted the 16 bit value passed into `dac_set()` down to the 12 bits that the DAC is actually capable of. This patch drops the shift and instead writes the 16 bit value to the DAC's left aligned 12 bit wide data holding register.
### Testing procedure
do something like:
``` c
#include "perip/dac.h"
int main(void)
{
dac_set(DAC_LINE(0), 0xffff/2);
return 0;
}
```
- observe DAC's output is half of vref
### Issues/PRs references
- none known
19531: tests/unittests: allow passing `UNIT_TESTS` via env r=benpicco a=kaspar030
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This extends support for the GET STATUS requests to support endpoints
and interfaces as recipient. It also adds the SET and CLEAR FEATURE
requests for the endpoints with support to set and clear the halt
condition on an endpoint.
Instead of directly stalling an endpoint, handlers should enable the
halt condition on an usbus endpoint to signal error condition.
This can then be cleared via a CLEAR FEATURE request from the host.
19392: ztimer: Fix doc on ztimer_remove r=benpicco a=bergzand
### Contribution description
See the subject
### Testing procedure
Read the modified docs
### Issues/PRs references
None
19398: gnrc_ipv6_static_addr: fix build with only static address r=benpicco a=benpicco
19399: drivers/usbdev_synopsys_dwc2: add ESP32x power management r=benpicco a=gschorcht
### Contribution description
This PR adds power management handling for ESP32x SoCs.
### Testing procedure
Use and ESP32-S2 or ESP32-S3 board and flash `tests/periph_pm` using the `stdio_cdc_acm`
```
USEMODULE=stdio_cdc_acm BOARD=esp32s3-devkit make -j8 -C tests/periph_pm flash
```
Connect the terminal to the board and execute command:
```
set_rtc 1 1
```
The console should continue to work after the 1-s light sleep.
### Issues/PRs references
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
To be able to check during compilation that the number of endpoints provided by a USB peripheral is not exceeded, each interface class has to define the number of IN and OUT endpoints it requires.
19365: bootloaders: fix bootloader button logic r=benpicco a=dylad
### Contribution description
In lastest master, the `BTN_BOOTLOADER_INVERTED` logic doesn't work as expected.
This PR fixes the underlying logic by replacing the `BTN_BOOTLOADER_INVERTED` macro definition by a runtime function.
In fact the current code:
```
#ifndef BTN_BOOTLOADER_INVERTED
#if (BTN0_MODE == GPIO_IN_PD)
#define BTN_BOOTLOADER_INVERTED false
#else
#define BTN_BOOTLOADER_INVERTED true
#endif
#endif
```
cannot work because both `BTN0_MODE` and `GPIO_IN_PD` are not known by the precompiler as they are enum values defined at cpu level.
Thus, replaces it by a runtime function in our bootloader applications.
I've also add `GPIO_OD_PU` along side `GPIO_IN_PU` and add a new define (which can be override at board level or app level) in case an external pullup is used.
### Testing procedure
Flash the riotboot_dfu bootloader:
`make BOARD=saml21-xpro -C bootloaders/riotboot_dfu flash`
Then, flash any test app:
`PROGRAMMER=dfu-util USEMODULE=usbus_dfu make BOARD=saml21-xpro -C tests/shell riotboot/flash-slot0`
With master, the application will not start.
With this PR, the application will start after flashing.
### Issues/PRs references
Fixes#19364
19366: nanocoap_sock: don't include token in empty ACK response r=benpicco a=benpicco
19367: cord: bump reference from draft to rfc r=benpicco a=bergzand
### Contribution description
The draft is an RFC, this bumps the "see also" in the docs to the rfc.
### Testing procedure
Check that the correct RFC is linked in the docs.
### Issues/PRs references
None
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
19343: ztimer: add ztimer_stopwatch convenience functions r=benpicco a=benpicco
19349: cpu/native: Switch to ztimer for gettimeofday r=benpicco a=MrKevinWeiss
### Contribution description
A xtimer is somewhat taken over by ztimer this explicitly uses ztimer instead of relying on the compatibility layer.
### Testing procedure
`make all test -C tests/cpp11_mutex/`
and green murdock I guess.
### Issues/PRs references
19353: doc: add quicklink to boards in navbar r=benpicco a=OlegHahm
### Contribution description
Finding a list of supported boards and how to use them is an essential information. Currently this list is somewhat hidden under "Modules" which is not very intuitive. Hence, I propose to (at least) put a link in the side menu to this overview page.
### Testing procedure
1. Call `make doc`
2. Check the sidebar `${RIOT_BASE}/doc/doxygen/html/index.html` for an entry "Supported Boards"
19361: nanocoap_sock: ensure response address is the same as request address r=benpicco a=benpicco
19363: Fix stm32 timer periodic r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> cpu/stm32/periph/timer: remove unneeded header
>
> I see no reason this header should be included. It does not exist in
> RIOT's source tree. This patch removes the include.
and
> cpu/stm32/periph/timer: fix execution flow
>
> The implmentation of `timer_set_absolute()` has The following problems.
> First, it attempts to restore the auto reload register (ARR) to it's
> default if the ARR was previosly set by `timer_set_periodic()` by
> comparing it to the channel's capture compare (CC) register _after_ it
> has already set the CC register. Secondly, it clears spurious IRQs
> _after_ the CC register has been set. If the value being set is equal to
> the timer's current count (or the two become equal before the supurios
> IRQ clearing happens), this could cause a legitimate IRQ to be cleared.
>
> The implmentation of `timer_set()` has the same error in handling the
> ARR as described above.
>
> This patch reorders the operations of both functions to do:
>
> 1. handle ARR
> 2. clear spurious IRQs
> 3. set channel's CC
> 4. enable IRQ
>
> Additionally, the calulation of `value` in `timer_set()` is moved
> earlier in the function's exec path as a pedantic measure.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: Oleg Hahm <oleg@hobbykeller.org>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
19358: sys/usbus/cdc/ecm: fix High-Speed mode r=dylad a=gschorcht
### Contribution description
This PR provides some changes to fix the USBUS CDC ECM interface in High-Speed mode.
In High-Speed mode, the EP data size has to be at least 512 bytes instead of 64 Byte in Full-Speed mode. To be able to define configurations like EP data sizes depending on whether Full-Speed or High-Speed USB device peripherals are used, the feature `periph_usbdev_hs`/`HAD_PERIPH_USBDEV_HS` is introduced.
### Testing procedure
Use `tests/usbus_cdc_ecm` and any board with USB HS connector, for example:
```
USEMODULE=periph_usbdev_hs_utmi BOARD=stm32f723e-disco make -j8 -C tests/usbus_cdc_ecm flash
```
`ping` command works with this PR but doesn't work without this PR.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19242: usbus/msc: add initial Mass Storage Class support r=benpicco a=dylad
### Contribution description
This PR adds the initial support for Mass Storage Class in USBUS. This PR relies on the RIOT MTD implementation to implement the Mass Storage Class support. With the provided test application, a MTD device will be accessible as a normal storage device on your host computer.
Read and Write operations are allowed.
Multiple LUNs are supported so several MTD devices can be exported through USB.
The MSC relies on SCSI protocol to operate.
Currently there are some limitations:
Supported host : Linux & Windows (macOS is untested)
MSC cannot be used if MTD page size > 4096
MTD device must have at least 512 bytes of memory to be exported.
Please be aware that performance are not so great.
### Testing procedure
Flash `tests/usbus_msc` application on a board with at least one MTD device.
Once the shell has started, prepare one or several MTD devices to be exported using `add_lun` command.
Once ready, start the USB connection with `usb_attach`
All MTD exported should appear as` /dev/sdX` on Linux.
### Issues/PRs references
Supersede #15941
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19331: pkg/tinydtls: Adjust defaults r=miri64 a=chrysn
### Contribution description
This adjusts two defaults in tinydtls:
* Default verbosity is set to warning. At the info level, this module produces way more output (several lines per new connection, and even per message) than is common in RIOT.
* If gcoap is used, the buffer size is adjusted to the gcoap buffer size plus overhead. Otherwise, CoAP-over-DTLS works fine until one happens to request larger resources.
### Testing procedure
* Run examples/gcoap_dtls
* Send a CoAP request from outside, eg. with `aiocoap-client 'coaps://[fe80::3c63:beff:fe85:ca96%tapbr0]/.well-known/core' --credentials testserver.json` (where testserver.json is `{"coaps://[fe80::3c63:beff:fe85:ca96%tapbr0]/*": {"dtls": {"psk": {"ascii": "secretPSK"}, "client-identity": {"ascii": "Client_identity"}}}}`).
Before, there are messages shown for every request; now there are none.
Modify `examples/gcoap/server.c` as follows:
```patch
diff --git a/examples/gcoap/server.c b/examples/gcoap/server.c
index bf2315cd01..28e1faac27 100644
--- a/examples/gcoap/server.c
+++ b/examples/gcoap/server.c
`@@` -68,7 +68,7 `@@` static const coap_resource_t _resources[] = {
};
static const char *_link_params[] = {
- ";ct=0;rt=\"count\";obs",
+ ";ct=0;rt=\"count\";obs;looooooooooooooooooooooong-attribute=\"loooooooooooooooooooooooooooooong\"",
NULL
};
```
The request passes; without this patch, it is stuck in retransmissions until "Network error: Retransmissions exceeded".
### Issues/PRs references
This contributes to making #19289 usable with a minimum level of security. (That module fills up the gcoap buffer to the brim). While the module handles the verbosity as well as it can (occasionally admitting that it lost bytes of output), the previous verbosity produces an infinite stream of stdout data. (But the default should be quiet immaterial of that particular PR).
Co-authored-by: chrysn <chrysn@fsfe.org>
17091: USBUS: Add URB support r=benpicco a=bergzand
### Contribution description
This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
### Testing procedure
- `tests/usbus_cdc_ecm` should still work. Testing one of the usbdev-supported platform should be sufficient here.
### Issues/PRs references
Needs #17064
18148: sys/flash_utils: helpers to store data in flash r=benpicco a=maribu
### Contribution description
This helpers that allow storing, accessing, and working with data in flash that works for both classical Harvard architectures (which do not map flash also into the address space) as well as modern Harvard architectures and von-Neumann architectures.
With this, `examples/default` again runs on the Arduino Uno / Nano. Since this board is still the "entry kit" for many people to embedded hardware, it would be nice to support it with our default example.
### Testing procedure
`examples/default` should run and work on ATmega boards (especially ATmega328P and ATmega32U4 based boards) as well on all other boards now.
### Issues/PRs references
None
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This adds a layer of convenience abstraction over classical Harvard
architectures (like most AVRs) that do not map the flash memory into
the data address space and modern Harvard architectures or von-Neumann
architectures that do so. The motivation is to safe a lot of RAM for
AVR by storing constant strings into flash.
This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
18682: pkg/lwext4: add lightweight implementation of the ext2/3/4 filesystem r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19292: sys/phydat: Fix unit confusion r=miri64 a=maribu
### Contribution description
Previously, `UNIT_G` was used for g-force with the correct symbol `g`, `UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs` (which is an alternative correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition, gram now uses the correct symbol `g`; which sadly is the same as for g-force. But usually there is enough context to tell them apart.
### Testing procedure
Green CI
### Issues/PRs references
None
19307: nanocoap_link_format: fix off-by-one error r=miri64 a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18746: sys/clif: Fixing out of bounds read under certain conditions r=maribu a=Teufelchen1
Hi 😈
This fixes a potential out of bounds read in clif_encode_link. There is no code in RIOT that can be exploited.
The fix does not break the current API but alters the behaviour slightly. Before the change, the length attributes of `clif_attr_t` where optional. If missing, the length was deduced using `strlen()`. This fix makes those parameters required and if they are `0` it operates as if the length really is `0`. This might not be ideal but it is the only non api breaking fix I could think off.
```c
typedef struct {
char *value;
unsigned value_len; NO LONGER OPTIONAL
const char *key;
unsigned key_len; NO LONGER OPTIONAL
} clif_attr_t;
```
Depends on #18744
cc `@leandrolanzieri`
19161: bors.yaml: re-activate labels check + add block_labels r=miri64 a=miri64
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
Previously, `UNIT_G` was used for g-force with the correct symbol `g`,
`UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which
would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs`
(which is an uncommon but correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been
renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition,
gram now uses the correct symbol `g` and Gauss uses `G`.
19299: Add missing newline to output of telnet example r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> The telnet example prints a line to the console, but it is not ended with a newline. When using pyterm, the last line is then never shown as it reads the console line by line and is waiting for the end of the line.
>
> This patch swaps use of `printf` for `puts` for the last line printed. This means the missing newline character gets added. This is also done to be consistent with the rest of the file, where puts is used whenever possible instead of printf.
### Testing procedure
1. `cd examples/telnet`
2. `make all flash term`
3. observe the final line "Local shell disabled" is printed, but would not have without this patch
### Issues/PRs references
- none known
19301: fib: document unused state r=benpicco a=benpicco
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19278: gnrc_dhcpv6_client_simple_pd: select upstream based on type/index r=benpicco a=benpicco
19290: sys/crypto: make AES_KEY struct private & rename it r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
17045: sys/coding: add XOR based coding module r=benpicco a=benpicco
19243: cpu/gd32v: add periph_gpio_ll and periph_gpio_ll_irq support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_gpio_ll` and `periph_gpio_ll_irq` support for GD32VF103. Level triggered interrupts are emulated.
`periph_gpio_ll_irq` could be split off from this PR as a separate PR if necessary.
### Testing procedure
Use any GD32V board and connect PA0 -> PB0 and PA1 -> PB1 where PA is the output port and PB the input port. With these connections `tests/periph_gpio_ll` should work.
```
BOARD=sipeed-longan-nano make -j8 -C tests/periph_gpio_ll flash term
```
If necessary, change the input and output pins by setting the environment variables and connect the corresponding pins, for example for `seeedstudio-gd32` PA1 -> PB8 and PA8 -> PB9:
```
PIN_OUT_0=1 PIN_OUT_1=8 PIN_IN_0=8 PIN_IN_1=9 BOARD=seedstudio-gd32 make -j8 -C tests/periph_gpio_ll flash term
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
This implements the XOR based error-correction code described by
Jürgen Fitschen (@jue89) at the RIOT Summit.
A parity byte is generated for each 3 payload bytes, then the payload array
is transposed by interpreting it as a 2D matrix with height of 3.
This is to reduce the chance of consecutive bytes ending up in the same
packet.
This allows to recover one in 3 lost data packets (if parity packets are received).
[0] https://summit.riot-os.org/2021/wp-content/uploads/sites/16/2021/09/s02-01.pdf
19178: nanocoap_sock: store message ID in nanocoap_sock_t r=benpicco a=benpicco
19186: cpu/gd32v: add periph_rtc support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_rtc` support and is one of a bunch of follow up PRs that complete the peripheral drivers for GD32VF103.
### Testing procedure
`tests/periph_rtc` should work and should give the following output:
```
Help: Press s to start test, r to print it is ready
START
main(): This is RIOT! (Version: 2023.04-devel-144-gc17695-cpu/gd32v/periph_rtc)
RIOT RTC low-level driver test
This test will display 'Alarm!' every 2 seconds for 4 times
Setting clock to 2020-02-28 23:59:57
Clock value is now 2020-02-28 23:59:57
Setting alarm to 2020-02-28 23:59:59
Alarm is set to 2020-02-28 23:59:59
Alarm cleared at 2020-02-28 23:59:57
No alarm at 2020-02-28 23:59:59
Setting alarm to 2020-02-29 00:00:01
Alarm!
Alarm!
Alarm!
Alarm!
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
19156: core/compiler_hints: add likely() / unlikely() hints r=kfessel a=benpicco
19174: tests/periph_spi clearly say when init succeeds r=benpicco a=jdavid
When the `tests/periph_spi` program succeeds the output can be interpreted as an error happened.
This PR makes it clearer when it does succeed.
### Contribution description
In `tests/periph_spi`:
- Explicitely say that the init operation was successful
- Rephrase the note to avoid misinterpretations
### Testing procedure
Run the `tests/periph_spi` program.
There is not much to test, just to verify the output, should be like this:
```
2023-01-19 10:42:33,768 # Trying to initialize SPI_DEV(1): mode: 0, clk: 0, cs_port: 0, cs_pin: 0
2023-01-19 10:42:33,777 # (if below the program crashes with a failed assertion, then it means the configuration is not supported)
2023-01-19 10:42:33,779 # Success.
```
### Issues/PRs references
Issue https://github.com/RIOT-OS/RIOT/issues/19025
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: J. David Ibáñez <jdavid.ibp@gmail.com>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
19057: fuzzing: Add uri_parser setup r=benpicco a=Teufelchen1
Hello!
### Contribution description
This PR is a replacement for PR #18802
In this contribution:
* The variable `AFL_FLAGS` is renamed to `FLAGS_FOR_AFL` because AFL is always complaining that `AFL_FLAGS` is not a valid env var for it. While this is not a bug nor an issue, I found it to be annoying.
* A generic input reader is added to simplify building a test harness
* The usage of this reader is demonstrated by adding a harness for fuzzing the uri_parser
(needs squashing after review)
### Testing procedure
Go to `fuzzing/uri_parser` and run `make all-asan` and `make fuzz` to get some action going.
Also mildly interesting: `./dist/tools/compile_test/compile_like_murdock.py -b native -a fuzzing/uri_parser`
### Issues/PRs references
The original PR #18802 is replaced because the generic input reader is present in both PRs but this PoC harness is much simpler.
19151: examples/gcoap: Fix shell parameter validation r=benpicco a=maribu
### Contribution description
Executing the shell command with an URI-Path that doesn't start with a slash results in an assertion error while composing the client side message. This is suboptimal user experience, so add an explicit check for a valid URI-Path and a dedicated error message.
### Testing procedure
#### In `master`
```
$ make BOARD=microbit-v2 -C examples/gcoap flash term
[...]
2023-01-15 22:23:32,512 # coap get [::1] /.well-known/core
2023-01-15 22:23:32,516 # gcoap_cli: sending msg ID 52272, 23 bytes
2023-01-15 22:23:32,520 # gcoap: response Success, code 2.05, 46 bytes
2023-01-15 22:23:32,524 # </cli/stats>;ct=0;rt="count";obs,</riot/board>
> coap get [::1] foo
2023-01-15 22:23:34,763 # coap get [::1] foo
2023-01-15 22:23:34,763 # 2329
2023-01-15 22:23:34,765 # *** RIOT kernel panic:
2023-01-15 22:23:34,767 # FAILED ASSERTION.
2023-01-15 22:23:34,767 #
2023-01-15 22:23:34,775 # pid | name | state Q | pri | stack ( used) ( free) | base addr | current
2023-01-15 22:23:34,784 # - | isr_stack | - - | - | 512 ( 200) ( 312) | 0x20000000 | 0x200001c8
2023-01-15 22:23:34,793 # 1 | main | running Q | 7 | 1536 ( 1072) ( 464) | 0x200006c0 | 0x2000095c
2023-01-15 22:23:34,802 # 2 | 6lo | bl rx _ | 3 | 1024 ( 328) ( 696) | 0x200036c0 | 0x200039c4
2023-01-15 22:23:34,810 # 3 | ipv6 | bl rx _ | 4 | 1024 ( 460) ( 564) | 0x20001294 | 0x20001574
2023-01-15 22:23:34,819 # 4 | udp | bl rx _ | 5 | 512 ( 300) ( 212) | 0x20003e98 | 0x20003f9c
2023-01-15 22:23:34,828 # 5 | coap | bl anyfl _ | 6 | 1112 ( 704) ( 408) | 0x20000e38 | 0x200011c4
2023-01-15 22:23:34,837 # 6 | nrf802154 | bl anyfl _ | 2 | 896 ( 288) ( 608) | 0x20001a90 | 0x20001d54
2023-01-15 22:23:34,843 # | SUM | | | 6616 ( 3352) ( 3264)
2023-01-15 22:23:34,843 #
2023-01-15 22:23:34,844 # *** halted.
2023-01-15 22:23:34,844 #
```
#### This PR
```
$ make BOARD=microbit-v2 -C examples/gcoap flash term
[...]
make: Entering directory '/home/maribu/Repos/software/RIOT/examples/gcoap'
/home/maribu/Repos/software/RIOT/dist/tools/pyterm/pyterm -p "/dev/ttyACM0" -b "115200"
2023-01-15 22:22:27,842 # Connect to serial port /dev/ttyACM0
Welcome to pyterm!
Type '/exit' to exit.
coap get [::1] /.well-known/core
2023-01-15 22:22:40,042 # coap get [::1] /.well-known/core
2023-01-15 22:22:40,046 # gcoap_cli: sending msg ID 25182, 23 bytes
2023-01-15 22:22:40,050 # gcoap: response Success, code 2.05, 46 bytes
2023-01-15 22:22:40,054 # </cli/stats>;ct=0;rt="count";obs,</riot/board>
> coap get [::1] foo
2023-01-15 22:22:43,858 # coap get [::1] foo
2023-01-15 22:22:43,862 # ERROR: URI-Path must start with a "/"
2023-01-15 22:22:43,866 # usage: coap <get|post|put|ping|proxy|info>
```
### Issues/PRs references
None
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
17066: sys/irq: Add C++ wrapper using RAII r=maribu a=jenswet
### Contribution description
This adds a C++ wrapper around the `irq.h` API. The wrapper uses RAII to accomplish a convenient and bug resistent use.
A little background: I'm currently writing my master thesis on using C++ for embedded development, at the working group that `@maribu` is part of. For that I will try to add better C++ support to several parts of RIOT and then do some benchmarking and metrics to compare it with the C implementation. For example, I also plan to add a wrapper around i2c, a std::cout drop-in replacement and probably some more about networks or threads.
### Testing procedure
I've added a unit test to verify that the IRQ wrapper calls the original `irq` functions as expected. As C++ and wrapper testing isn't done much so far in this project, I've added two additional headers to ease testing:
1. #17076 - fake functions framework, already merged
2. As there is no framework for C++ unit tests yet, I've added something for this too. Unfortunately the existing frameworks like GoogleTest, CppUTest or CppUnit don't easily compile for embedded or are difficult to integrate in to the RIOT build process. That's why I wrote some (simple) helper functions and macros inspired by the above frameworks. That allows to create C++ tests based on a fixture class with set up and tear down methods. It also allows some simple assertions and is easily extendable for other use cases. It wraps some of the fff functionality too.
Both of this is obviously not required for the initial reason of this PR. But I'd like to provide unit tests for the features that I suggest to introduce where possible. So I'd appreciate some feedback on that too. If you'd prefer a PR without or different tests please let me know.
You can run the test `irq_cpp` locally or on the CI to test the implementation.
Please feel free to give feedback or suggest improvements!
Co-authored-by: Jens Wetterich <jens@wetterich-net.de>
