Leandro Lanzieri
be8289bd8d
cpu/cortexm_common: Add Kconfig symbols
...
This declares the architecture and core specific Kconfig symbols and the
features provided by it are selected.
2020-05-28 14:11:21 +02:00
Philipp Blum
35dcf637f2
cpu/nrf52: add support for nrf52811
2020-05-10 17:10:33 +02:00
benpicco
0bbc86a379
Merge pull request #14041 from gschorcht/cpu/esp/fix_make_flash_dependency
...
cpu/esp_common: fix the dependency of the flash image on the ELF file
2020-05-08 11:55:14 +02:00
Gunar Schorcht
d0cc955394
cpu/esp_common: fix dependency of flash target on ELF file
...
Flashing an ESP board first requires the creation of a flash image from the ELF file. This is realized in the `preflash` target. However, the `preflash` target only depends on the variable `BUILD_BEFORE_FLASH` but on the ELF file. Therefore, the variable `BUILD_BEFORE_FLASH` must be set to the ELF file to ensure that when using multiple make processes, the compilation of the ELF file is completed before the flash image is created.
2020-05-08 11:03:39 +02:00
Marian Buschsieweke
0fe24e1c8b
Merge pull request #13903 from benpicco/cpu/lpc2387/timer_pclk_scale
...
cpu/lpc2387: timer: use lpc2387_pclk_scale()
2020-05-07 22:04:14 +02:00
fabian18
a3a1c160ee
mtd: Change API to return 0 on success
...
Returning the number of bytes written/read could return a negative integer
because a uint32_t is expected for the length in read()/write() operations.
2020-05-06 20:24:27 +02:00
Francisco
cea0d1c532
Merge pull request #13421 from benpicco/cpu/sam0_common/i2c-deinit
...
drivers/periph/i2c: add periph_i2c_reconfigure feature & implementation for sam0
2020-05-05 19:09:47 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
Benjamin Valentin
8c502322f4
cpu/sam0_common: i2c: implement the periph_i2c_reconfigure feature
...
This adds sam0 implementations for
- i2c_init_pins()
- i2c_deinit_pins()
- i2c_pin_sda()
- i2c_pin_scl()
2020-05-05 16:12:19 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
cab264a056
cpu/lm4f120: fix invalid doxygen group name
2020-05-05 14:08:32 +02:00
Semjon Kerner
cb228a44f2
Merge pull request #14002 from PeterKietzmann/pr_nrf5x_hwrng_biascorr
...
cpu/nrf5x_common: enable bias correction in hwrng
2020-05-05 13:40:15 +02:00
benpicco
3c03394e1e
Merge pull request #13820 from francois-berder/pic32-gpio-irq
...
cpu: mips_pic32_common: Implement GPIO IRQ
2020-05-04 18:36:48 +02:00
Marian Buschsieweke
ac246cfd10
cpu/msp430_common: Fix missing include
2020-05-04 10:58:36 +02:00
benpicco
fbae0a1117
Merge pull request #13901 from benpicco/cpu/sam0_common/timer_flex_freq
...
cpu/sam0_common: timer: don't ignore frequency in timer_init()
2020-05-04 02:56:01 +02:00
benpicco
fab87d903c
Merge pull request #13991 from btcven/2020_04_30-osc
...
cc26x2_cc13x2: add oscillator switching functions
2020-05-02 22:46:03 +02:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Martine Lenders
ad89680c40
Merge pull request #14004 from gschorcht/cpu/esp32/fix_newlib_nano_printf_float
...
cpu/esp32: fix printf for float with newlib-nano
2020-05-02 20:43:00 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Jean Pierre Dudey
4bf6a4db04
cc26x2_cc13x2: separate arrays with newline
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-05-02 13:25:41 -05:00
Jean Pierre Dudey
a66c693ad5
cc26x2_cc13x2: add oscillator switching functions
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-05-02 13:25:41 -05:00
Jean Pierre Dudey
0aeed80eb0
cc26xx_cc13xx: add ROM Hard-API
...
This is needed to switch the SCLK_HF source clock safely.
Note: these functions work on cc26x2_cc13x2 and cc26x0, but special care
needs to be taken when calling on cc26x0 some of these functions, as
ADDI_SEM needs to be taken.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-05-02 13:25:41 -05:00
Francois Berder
8db01ab9a0
cpu: mips_pic32_common: Implement GPIO IRQ
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Benjamin Valentin
bfb3d52a63
cpu/sam0_common: implement periph/dac
...
The sam0 MCUs all have a DAC peripheral.
The DAC has a resulution of 10 or 12 bits and can have one or two
output channels.
The output pins are always hard-wired to PA2 for DAC0 and PA5 for DAC1
if it exists.
On the same54-xpro I would only get a max value of ~1V when using the
internal reference, so I configured it to use an external voltage reference.
The external reference pin is hard-wired to PA3, so you'll have to connect
that to 3.3V to get results.
2020-05-02 18:31:55 +02:00
Gunar Schorcht
5fbf74b203
cpu/esp32: fix printf for float with newlib-nano
2020-05-02 16:56:29 +02:00
PeterKietzmann
dd2d6b174e
cpu/nrf5x_common: enable bias correction in hwrng
2020-05-01 17:04:36 +02:00
Benjamin Valentin
c05984b341
cpu/sam0_common: timer: don't ignore frequency in timer_init()
...
Now that we can query the GCLK frequency at run-time, there is no need
to implicitely hard-code the timer frequency in the config struct anymore.
2020-05-01 16:44:06 +02:00
benpicco
99e8b04921
Merge pull request #13812 from gschorcht/cpu/esp32/fix_newlib_nano
...
cpu/esp32: use module newlib_nano
2020-05-01 14:40:02 +02:00
benpicco
4150afea00
Merge pull request #13749 from gschorcht/cpu/esp32/periph_rtt
...
cpu/esp32: replace RTC implementation by RTT implementation
2020-05-01 14:14:01 +02:00
benpicco
c95e4c3b9e
Merge pull request #13816 from btcven/2020_04_02-setup-trim-device
...
cc26x2_cc13x2: trim device registers on `cpu_init`.
2020-05-01 14:09:08 +02:00
Benjamin Valentin
89a145ab0c
cpu/lpc2387: clocks: minor style fix
2020-04-30 20:43:41 +02:00
Benjamin Valentin
c262c91561
cpu/lpc2387: PM: enable SLEEP & POWERDOWN mode
...
We have to re-init PLL (and Flash) after wake from those modes.
2020-04-30 20:43:41 +02:00
Benjamin Valentin
3b257f9a5a
cpu/lpc2387: export functions to init PLL & MAM
...
Those functions are needed after wake from lower sleep modes.
2020-04-30 20:43:41 +02:00
Jean Pierre Dudey
951a99dba3
cc26x2_cc13x2: add setup_trim_device function
...
This function trims the necessary registers for the device to operate
normally.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:32:58 -05:00
Jean Pierre Dudey
dc1d2ace42
cc26xx_cc13xx: add ADI3 and masked access
...
- Added ADI instruction offsets
- Added register banks and address bases for masked access (writes).
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:32:58 -05:00
Jean Pierre Dudey
92589c2129
cc26x2_cc13x2: update AON_PMCTL register bank
...
- Updated documentation.
- Fixed offset of JTAGUSERCODE.
- Added necessary register values to perform startup trims.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:16:45 -05:00
Jean Pierre Dudey
e2489ced97
cc26xx_cc13xx: add register values
...
Add some register values needed to trim registers.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:16:45 -05:00
Jean Pierre Dudey
e514266186
cc26x2_cc13x2: add FCFG->DAC_BIAS_CNF values
...
These are necessary to trim some registers at startup.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:16:45 -05:00
Jean Pierre Dudey
6829dfdf1b
cc26xx_cc13xx: fix FLASH->CFG offset, update VIMS
...
- Changed "meh" to "Reserved".
- Renamed CTL to CFG to match SDK/TRM name.
- Added constants for VIMS and FLASH necessary to trim registers.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:16:45 -05:00
Jean Pierre Dudey
1733e62217
cc26xx_cc13xx: update AON_IOC register bank
...
- Updated documentation
- Fixed register bank name
- Added missing field
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:16:45 -05:00
Jean Pierre Dudey
cdf2e88804
cc26x2_cc13x2: add 16-bit masked access to DDI_0_OSC
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 18:16:45 -05:00
Jean Pierre Dudey
1586c89f1a
cc26x2_cc13x2: update DDI_0_OSC register bank
...
- Fixes padding.
- Updates documentation.
- Removes documentation longer than 80-chars for the registers values.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 10:17:20 -05:00
Jean Pierre Dudey
2921944c66
cc26x2_cc13x2: add function to change AUX opmode
...
This function is needed to setup the AUX operational mode at startup,
also used for managing low-power states.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-29 09:38:36 -05:00
5a9f01d91a
native: pass eeprom file path via command line
2020-04-29 08:56:33 +02:00
cbdda3c990
cpu/native: read/persist EEPROM data at startup/reboot/exit
2020-04-29 08:55:10 +02:00
4e1d7abddc
cpu/native: implement eeprom peripheral driver
...
The driver simply manages an internal buffer in memory that can be filled/dumped from/to a file
2020-04-29 08:55:08 +02:00
benpicco
4bb8fab1dc
Merge pull request #13971 from bergzand/pr/sam0_common/cpuid_clarify
...
sam0_common: clarify memcpy in cpuid_get
2020-04-28 18:31:27 +02:00
benpicco
96c638f2d1
Merge pull request #13949 from benpicco/MAKEFILEDIR-doc
...
Makefile.include: update the documentation of $(MAKEFILEDIR)
2020-04-28 18:30:44 +02:00
Benjamin Valentin
d5dce87e1b
Makefile.include: rename MAKEFILEDIR to LAST_MAKEFILEDIR
...
Rename the variable to make it clearer that it refers to the last Makefile
included.
Usually this is the current file, but when another Makefile is included this
changes.
2020-04-28 15:45:27 +02:00
fe299138aa
sam0_common: clarify memcpy in cpuid_get
2020-04-28 14:56:19 +02:00
