bcfa11e39d
nucleo-l433rc: remove obsolete spi_divtable include
2020-08-18 16:55:11 +02:00
7b9f435f70
boards/stm32l4: use common spi_divtable where possible
2020-08-07 12:25:18 +02:00
5615b0c027
boards/nucleo-*: model features in Kconfig
2020-07-16 11:34:02 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
9cc338d29e
boards/nucleo-l4*: use shared clock configuration
2020-04-07 17:42:56 +02:00
Yannick Gicquel
d37adee32d
boards/stm32-based: allow SPI signals routed on multiple alternate functions
...
There is no hardware limitation for custom boards based on STM32 to uses
SPI bus with signals coming from different PORT and alternate functions.
This patch allow alternate's function definition per pin basis, thus enable
the support of SPI bus signals routed on differents PORT.
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2019-10-25 06:27:41 +02:00
Gaëtan Harter
636285ebe4
boards: move CPU/CPU_MODEL definition to Makefile.features
...
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-08-20 16:11:50 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
Francisco
b8cd3c0724
Merge pull request #11809 from aabadie/pr/boards/stm32_timer_conf_common
...
boards/stm32: introduce common timer configurations and use them where possible
2019-08-06 17:07:22 +02:00
Francisco
db08af4586
Merge pull request #11812 from aabadie/pr/boards/nucleo_doc_cleanup
...
boards/nucleo*: move doxygen group definition to doc.txt
2019-08-05 15:22:03 +02:00
564686f882
boards/nucleo-l4*: use common timer configuration
2019-08-05 15:00:11 +02:00
7853ca0108
boards/stm32*: remove useless RTC_NUMOF defines
2019-08-05 11:08:53 +02:00
1e7409a4f0
boards/nucleo*: cleanup board doxygen group definition
...
These boards were providing an empty doc.txt and the group definition was still in the periph_conf.h file
2019-07-07 17:56:54 +02:00
342f3e87e2
boards/stm32l4: add riotboot support
2019-07-04 10:35:02 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
4c86b00808
boards/nucleo-l433rc: use common rtt configuration
2019-05-21 08:38:43 +02:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
4ae15d18b5
boards/stm32based: remove periph_gpio/irq from board level
2018-12-18 21:51:14 +01:00
8c6a7bc370
boards/nucleo-l433rc: use lpuart for stdio
...
- this UART is connected to st-link and can be reached via USB
- the second UART is linked to Arduino RX/TX pins
2018-12-13 12:39:00 +01:00
cladmi
b450141d4d
boards: unconditionally include CPU/Makefile.features
...
The file always exist so no need to do '-include'.
Replaced using:
sed -i 's|-\(include $(RIOTCPU)/.*/Makefile.features\)|\1|' \
$(git grep -l '$(RIOTCPU)/.*/Makefile.features' boards)
2018-10-11 17:13:40 +02:00
Joakim Nohlgård
8996cbe313
make: Introduce new feature flag periph_gpio_irq
2018-08-29 08:53:20 +02:00
1c90210277
boards/nucleo-l433rc: initial basic support
2018-03-21 17:07:28 +01:00
