19564: tests: move all bench applications to their own tests/bench/ folder r=aabadie a=aabadie
19569: tests/lua_loader: move to tests/pkg/lua_loader r=aabadie a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
The ASCR register is available and has to be set for all STM32L471xx, STM32L475xx, STM32L476xx, STM32L485xx and STM32L486xx MCUs. Instead of using the CPU model for conditional compilation, the CPU line is used to support all MCU of that lines.
For boards that have not connected the V_REF+ pin to an external reference voltage, the VREFBUF peripheral can be used as V_REF+ if supported by setting `VREFBUF_ENABLE=1`.
The ADC clock disable is fixed using a counter. The counter is incremented in `prep` and decremented in `done`. The ADC clock is disabled if the counter becomes 0.
If the DAC peripheral has a mode register (DAC_MCR), it is set to normal mode with buffer enabled and connected to external pin and on-chip peripherals. This allows to measure the current value of a DAC channel or to use the DAC channel also for other on-chip peripherals.
For boards that have not connected the V_REF+ pin to an external reference voltage, the VREFBUF peripheral can be used as V_REF+ if supported by setting `VREFBUF_ENABLE=1`.
PU/PD configuration has to be `0b00` for analog outputs which is corresponds to the reset state. However, if the GPIO is not in reset state but was used digital input/output with any pull resistor, the PU/PD configuration has also to be reset to work as ADC channel.
GCC 12 gives out of bounds warnings when the resulting address is out
of bounds of what GCC assumes to be the valid address space. It seems
that by default the address 0x0 is not considered valid (which would
be a NULL pointer and typically not mapped in a userspace behind an MMU
scenario), but in fact is valid on bare metal hardware. At least on
AVR and MSP430 this needs to be set. On many Cortex M MCUs 0x0 is also
a valid address (e.g. often the flash is mapped there), but seemingly
for them `--param=min-pagesize=0` is already the default. In any case,
it won't hurt to set it explicit for them as well.
An `INSERT AFTER` directive no longer can refer to a different linker
script included with `-T path/to/script.ld`. Instead, this adds wrapper
linker scripts that just `INCLUDE` the three individual linker scripts.
This way, the xfa.ld can safely refer back to sections defined in
the vendor linker script.
For some reason, this approach cause the exact issue it fixes for
binutils 2.40 with the binutils in the CI. We stick with the old
linker flags with binutils prior 2.40 to be compatible with both
conflicting behaviors.
The best approach would be to come up with something that works across
different versions of binutils; but no such solution materialized.
18788: pkg/lvgl: Change all references of LittlevGL to LVGL in doc.txt r=aabadie a=OkiStuff
Change all references of LittlevGL to LVGL in pkg/lvgl/doc.txt per request of LVGL team (https://github.com/lvgl/lvgl/pull/3761)
### Contribution description
Changing parts of the pkg/lvgl/doc.txt to replace "LittlevGL" to LVGL as per request of the LVGL team
### Issues/PRs references
https://github.com/lvgl/lvgl/pull/3761
Co-authored-by: Frankie A <40648091+OkiStuff@users.noreply.github.com>
19552: tests: move all periph applications to their own periphs/ folder r=gschorcht a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19550: tests/drivers/l3gxxxx: fix used sensor version for iotlab boards r=aabadie a=gschorcht
### Contribution description
This PR fixes the `l3gxxxx` driver version used in `tests/drivers/l3gxxxx` for IoT-Lab boards. It hopefully fixes the compilation of nightly.
The problem occurred with PR #19523.
### Testing procedure
```
BOARD=iotlab-a8-m3 make -j8 -C tests/drivers/l3gxxxx info-modules | grep l3g4200d_ng
```
should succeed.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19522: tests/periph_rtt: Fix for tick conversion test r=benpicco a=chudov
### Contribution description
Type casting and `printf` formatting for the `RTT_MAX_VALUE` and `RTT_FREQUENCY` are fixed so 32-bit value is properly handled by 'avr-libc'.
The original tick conversion test assumes that `RTT_FREQUENCY` is power of 2 so forward and backward ticks to seconds conversion results in the original ticks value. To fix it the result of the forward-backward conversion is compared with `ticktest / RTT_FREQUENCY * RTT_FREQUENCY` that considers rounding errors.
Changes were tested on deRFmega256 and nrf52840dongle.
### Testing procedure
tests/periph_rtt on a board with ATmega256RFR2 shall:
* show correct RTT_MAX_VALUE
* conversion check shall report no error.
### Issues/PRs references
Fixes#15940
Co-authored-by: chudov <chudov@gmail.com>
