The pseudomodules used by the PCF7857x driver are correctly defined by `Makfefile.include` of the driver. However, by mistake they were left in `makefiles/pseudomodules.mk` when the very old PR was rebased to the current master. That is, they were only leftovers that have been overseen after rebasing an squashing dozens of fixup commits.
This PR makes `event_timeout` and `event_timeout_ztimer` two distinct
pseudomodules, where the only api difference is in the init function.
If only `event_timeout_ztimer` is selected then no default ZTIMER
backend is selected and the old init function is not implemented.
If only `event_timeout` is selected then `xtimer` is used unless
`ztimer_usec` is included. In which case the `xtimer` wrapper on top
of `ztimer` is used and `xtimer` is not directly selected. This
allows for the legacy api to be supported with `ztimer_usec` as
a drop-in replacement.
If `event_timeout` and `event_timeut_ztimer` are selected then
`event_timeout` SRC file is excluded from compilation.
Prefix delegation used to be the only supported feature of our DHCPv6
client, but by now it also supports MUD, DNS recursive name servers and
IA_NA is on the horizon. So it makes sense to make IA_PD an optional
module like all those other features are as well.
There is no real reason for that pseudo-module to use the `gnrc_`
prefix. Neither does it need GNRC-components (except, but optionally, as
a network stack of course), nor is it implemented with in the GNRC
network stack.
A lot of things break if `GNRC_NETIF_FLAGS_HAS_L2ADDR` is not set.
In order to handle router advertisements and auto-configureation,
generate a faux l2 address based on the netdev ID.
The Silicon Labs Si705x sensors (Si7050/1/3/4/5) are very similar to the
Si7021 sensors featuring only a temperature sensor and no humidity
sensor. The only difference between the Si705x is the temperature
accuracy of the reading, ranging from +/- 0.1 C in the Si7051 to +/- 1 C
in the Si7050.
This patch adds support for this family of sensors extending the
functionality of the existing si70xx driver. Following the style of
other modules, this implements a pseudomodule per supported chip, adding
si7050, si7051, si7053, si7054 and si7055 pseudomodules.
As a minor change this patch also implements the missing
si70xx_get_serial, si70xx_get_id and si70xx_get_revision functions that
were declared in the si70xx.h header but implemented as private
functions. The si70xx_get_id() may be relevant for the application to
know at run time exactly which version of the hardware is installed.
The updated test running with a Si7051 shows the following output, which
seems consistent with the room temperature conditions during the test.
```
make SI70XX_VARIANT=si7051 -C tests/driver_si70xx/ all flash
```
```
SI70XX temperature and humidity sensor test application
Initializing sensor...
[OK]
Found SI7051 sensor, revision 32
temperature: 24.71 C
temperature: 24.69 C
```
tests/driver_ds3231
drivers/ds3231: add alarm support with IRQ
drivers/ds3231: alarm support and documentation
drivers/ds3231: alarm interrupt with mutex
drivers/ds3231: alarm, _unlock function
fixup! drivers/ds3231: add alarm support
