19240: tools/doccheck: add simple exclude to doccheck r=benpicco a=kfessel
while doccheck runs for #19228 and #19220, i saw some spikes in memory consumption, turned out that was `grep -Evf dist/tools/doccheck/exclude_patterns` using about 2GB RAM. This PR changes that.
### Contribution description
add `exclude_simple` to `doccheck` drived from `exclude patterns`
`sort`ed and `uniq`ued the simple excludes
removes no longer needed patterns from `exclude patterns`
simple excludes are string rules (no patterns just strings)
how to apply these:
in this PR:
*remove the path and line number from the rule
* that made some of them doubles of each other
* sorted and uniqued them.
* this set of excludes is no longer path specific (an exception covers all paths but may of them still contain a file name)
another possible solution would be to have the excludes line number specific.
### Testing procedure
run `dist/tools/doccheck/check.sh`
compare memory consumption of
master: `grep -Evf dist/tools/doccheck/exclude_patterns`
to
this PR: `grep -Fvf dist/tools/doccheck/exclude_simple`
### Issues/PRs references
19248: cpu/gd32v: add periph_dac support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_dac` support for GD32VF103.
### Testing procedure
`tests/periph_dac` should work on `sipeed-longan-nano` port on PA4 and PA5.
### Issues/PRs references
19255: boards/esp*: complete SD Card MTD config r=benpicco a=gschorcht
### Contribution description
This PR provides the remaining changes necessary to use the generic MTD SD Card configuration as described in PR #19216.
This includes defining the MTD offset for SD cards, since the default `MTD_0` device always uses the internal flash device, and the completion of the configuration for the ESP32 boards with a SD card interface.
### Testing procedure
`tests/vfs_default` should work now with SD Cards:
```
main(): This is RIOT! (Version: 2023.04-devel-323-gfcc07)
mount points:
/nvm0
/sd0
data dir: /sd0
> vfs df
Mountpoint Total Used Available Use%
/nvm0 3052 KiB 8 KiB 3044 KiB 0%
/sd0 7580 MiB 3632148992 B 21089792 B 99%
```
### Issues/PRs references
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19228: doccheck: avoid generating dot or html r=benpicco a=kfessel
### Contribution description
doccheck without generating dot or html
this also has some new generated lines for exclude_pattern (some of them where broke so I regenerated the block)
### Testing procedure
doccheck
### Issues/PRs references
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
16782: drivers/mfrc522: add new driver r=benpicco a=HendrikVE
### Contribution description
This PR adds support for the MFRC522. It is quite common in the Arduino world and it is quite cheap. The driver connects to the MFRC522 via SPI and is heavily based on the Arduino driver available [here](https://github.com/miguelbalboa/rfid). Basically it was ported, but with several improvements in readability and documentation.
### Testing procedure
The given (manual) test provides single commands for some driver functions.
19201: cpu/gd32v: add periph_i2c support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_i2c` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V. As for STM32F1, the driver is using polling instead of interrupts for now. It will be implemented interrupt-driven later.
### Testing procedure
`tests/periph_i2c` as well as a test with any I2C sensor should work. The driver was tested with `tests/driver_l3gxxxx` and `tests/driver_bmp180`.
### Issues/PRs references
Co-authored-by: Hendrik van Essen <hendrik.ve@fu-berlin.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
This commits add documentation to the HDC1000 params and adds generic
exclude patters to the doc check, so that when boards provide custom
HDC1000 params they do not need to document them again. The reasoning
is that the documentation in the central place is sufficient.
This commits add documentation to the FXOS8700 params and adds generic
exclude patters to the doc check, so that when boards provide custom
FXOS8700 params they do not need to document them again. The reasoning
is that the documentation in the central place is sufficient.
In addition, a generic exclude patter is added to match FXOS8700_REG_*,
as the register names are relatively self-explaining and an
implementation detail of the driver that doesn't need public
documentation.
This commits add documentation to the AT86RF2xx params and adds generic
exclude patters to the doc check, so that when boards provide custom
AT86RF2xx params they do not need to document them again. The reasoning
is that the documentation in the central place is sufficient.
Add generic patterns to allow XTIMER_DEV, XTIMER_HZ, XTIMER_WIDTH,
XTIMER_CHAN, XTIMER_BACKOFF, and XTIMER_ISR_BACKOFF to be undocumented.
The reasoning is that having them documented once is enough and warnings
for missing doc in every boards is just noise.
This commits add documentation to the TMP00X params and adds generic
exclude patters to the doc check, so that when boards provide custom
TMP00X params they do not need to document them again. The reasoning is
that the documentation in the central place is sufficient.
This commits add documentation to the pulse counter params and adds
generic exclude patters to the doc check, so that when boards provide
custom pulse counter params they do not need to document them again. The
reasoning is that the documentation in the central place is sufficient.
This commits add documentation to the PIR params and adds generic
exclude patters to the doc check, so that when boards provide custom PIR
params they do not need to document them again. The reasoning is that
the documentation in the central place is sufficient.
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
