MrKevinWeiss
e0fdc3c16c
*Kconfig*: Modify Kconfig to remove dep model
2024-03-27 10:28:12 +01:00
Marian Buschsieweke
c3500eb6e0
tree wide: fix typos in comments found by codespell
...
This will not change generated binaries, only the Doxygen output and
source code will have less typos.
2023-05-02 09:52:06 +02:00
Jue
2a81a2ab5c
cpu/efm32: provide periph_uart_modecfg feature for every board
2022-11-21 23:20:19 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
Leandro Lanzieri
0e62d83edb
boards: model efm32 boards Kconfig
2021-11-18 09:03:06 +01:00
Benjamin Valentin
fc88c4c4e5
boards: drop cpu_init()
2021-10-13 23:36:41 +02:00
Karl Fessel
c41342dc5b
boards/*efm32*: do not force RTT_FREQUENCY
...
while keeping a sane (rtt shared with rtc (counter)) default
this commit adds the ability to define RTT_FREQUENCY
to some thing different than 1 Hz
2021-04-20 11:12:45 +02:00
f8822b5f8f
boards: remove not need PORT_LINUX/PORT_DARWIN
...
They defined the same in serial.inc.mk. Some Darwin default are changed because they are probably wrong
2020-12-02 09:20:57 +01:00
4c290e1f92
boards: remove include of serial.inc.mk
2020-12-02 09:20:57 +01:00
Bas Stottelaar
e1b356e884
boards/efm32: enable efm32_coretemp driver
2020-11-18 12:28:45 +01:00
benpicco
808c5b7eb8
Merge pull request #15424 from basilfx/feature/efm32_fix_timers
...
boards/efm32: update channel_numof with correct values
2020-11-11 09:49:24 +01:00
Bas Stottelaar
67e7a14e6c
boards/efm32: update channel_numof
...
The number of channels per timer got updated incorrectly in #15368 .
Only TIMER1 and higher have four channels. Without this fix, timer
initialization will halt.
2020-11-11 00:26:52 +01:00
Bas Stottelaar
cc9586f163
boards/common/silabs: define CPU=efm32
2020-11-11 00:24:53 +01:00
Bas Stottelaar
de342fa0c4
boards/efm32: update documentation
...
* Alignment of documentation between boards
* Updated links
* Table updates
* Line length
* Space between units
* Updated peripheral mapping
2020-11-04 22:26:53 +01:00
Bas Stottelaar
98f3ea39f1
boards/sltb001a: replace *_ENABLED (x)
2020-11-04 22:05:36 +01:00
Bas Stottelaar
2ea9829b02
boards/efm32: update timer configuration
2020-11-04 22:05:36 +01:00
Bas Stottelaar
8383d09d20
boards/efm32: remove secondary UART
...
The secondary UART is used as the first SPI peripheral, that is
initialized on boot. Therefore, it doesn't make sense to add it as a
secondary UART.
2020-11-04 22:05:36 +01:00
Bas Stottelaar
42deb1ab85
boards/efm32: align xtimer configuration
...
- move XTIMER_WIDTH within #if statement because sltk3402a is 32-bit
- update comments
- alignment.
2020-11-04 22:05:36 +01:00
Bas Stottelaar
cf65d27c94
boards/efm32: update copyright year
2020-11-04 19:55:16 +01:00
Francisco Molina
a3de88a4db
boards: efm32 boards, LETIMER + regular timer
2020-08-31 09:38:32 +02:00
Francisco Molina
5c4db4a65b
cpu/efm32: use IS_ACTIVE for CONFIG_EFM32_USE_LETIMER
2020-08-31 09:38:30 +02:00
Thomas Stilwell
754d790b3f
boards: efm32 boards: add support for LETIMER
2020-07-10 20:44:03 -05:00
Leandro Lanzieri
ef4835a092
Merge pull request #14384 from basilfx/feature/silabs_cleanup
...
boards/sltb001a+slstk3402a: minor updates to headers
2020-06-29 08:45:21 +02:00
Bas Stottelaar
3433a32cce
boards/sltb001a: Si7201A does not exists
...
Its just the Si7210: https://www.silabs.com/sensors/magnetic/si7210 .
2020-06-28 22:57:29 +02:00
Bas Stottelaar
e4217f1b0f
boards/sltb001a: enable CCS811 sensor
2020-06-28 22:42:32 +02:00
Leandro Lanzieri
d1d6bdb1d3
boards/sltb001a: Add Kconfig symbols
2020-06-18 16:39:56 +02:00
Gunar Schorcht
30e4d66504
boards/sltb001a: fix broken links
2020-03-24 10:38:40 +01:00
c49ad27499
boards: don't export JLINK_PRE_FLASH
2020-03-10 16:31:32 +01:00
1e9879fbcf
boards: unexport JLINK_DEVICE variable
2020-03-10 16:28:03 +01:00
chrysn
f4b1d60887
boards/*silabs: Move programmer selection to common
...
This removes duplication for the jlink case (keeping only any
non-default values in the board makefiles), and opens up STK3700's
OpenOCD programmability for generic boards.
2020-02-14 09:42:20 +01:00
Bas Stottelaar
d6b478f607
boards/efm32: provide CPU_FAM
2020-02-11 22:46:17 +01:00
713fead00a
boards: move some USEMODULE to Makefile.dep
2020-02-07 13:21:22 +01:00
Bas Stottelaar
12ec03d2e0
boards/sltb001a: update documentation
2020-01-13 23:38:43 +01:00
Hauke Petersen
f46731801a
boards/sltb001a: use i2c mode of bme280 driver
2019-11-22 14:04:37 +01:00
Benjamin Valentin
0ea2cbf1eb
boards: remove RTT_NUMOF/RTC_NUMOF
...
Those macros are defined but never used.
2019-11-08 14:20:33 +01:00
aed0cfb1d8
boards/efm32: remove useless provided gpio features
...
These features are provided at CPU level
2019-10-18 09:33:54 +02:00
Bas Stottelaar
08bc67c0b6
boards+efm32: skip board initialization when in bootloader
2019-10-01 18:08:27 +02:00
Bas Stottelaar
559fc1fe04
boards+efm32: provide periph_uart_modecfg
2019-09-30 18:12:15 +02:00
Bas Stottelaar
3371cf1831
boards+efm32: remove non-standard uart modes feature
2019-09-30 18:10:38 +02:00
Bas Stottelaar
6a17cb7029
boards+efm32: remove LOW_POWER_ENABLED from doc.txt
2019-09-30 00:03:15 +02:00
Gaëtan Harter
636285ebe4
boards: move CPU/CPU_MODEL definition to Makefile.features
...
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-08-20 16:11:50 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
Gaëtan Harter
777592dff1
boards/sltb001a: reset before flashing
...
When it was running 'hello-world', the board could not be flashed through
JLinkExe anymore and only through the drag and drop support.
By resetting the board before doing 'loadbin' it can now be flashed
properly.
2019-05-20 13:54:06 +02:00
Federico Pellegrin
994999132a
boards/common/silabs: add Arduino API support for SiLabs boards
2018-11-08 17:03:19 +01:00
cladmi
b450141d4d
boards: unconditionally include CPU/Makefile.features
...
The file always exist so no need to do '-include'.
Replaced using:
sed -i 's|-\(include $(RIOTCPU)/.*/Makefile.features\)|\1|' \
$(git grep -l '$(RIOTCPU)/.*/Makefile.features' boards)
2018-10-11 17:13:40 +02:00
Bas Stottelaar
e12d4e8a2f
boards: sltb001a: throw error on EMU_DCDCINIT_OFF
2018-09-17 19:36:56 +02:00
Bas Stottelaar
6ae49aa649
boards: sltb001a: add docs
2018-09-02 22:22:17 +02:00
Joakim Nohlgård
8996cbe313
make: Introduce new feature flag periph_gpio_irq
2018-08-29 08:53:20 +02:00
Kevin Weiss
8468fe1c94
Merge pull request #8516 from jia200x/wiki_dox_convertion
...
doc: move wiki to Doxygen documentation (second attempt)
2018-08-07 13:27:04 +02:00
