19523: boards/iotlab-m3: enable l3g4200d_ng r=benpicco a=benpicco
19527: drivers/sdcard_spi: small cleanup r=benpicco a=gschorcht
### Contribution description
This PR provides a small cleanup:
- the copy of `sdcard_spi_params_t` is removed (commit bfc2a51f70)
- the documentation was changed to fit the 100 characters per line. (commit 36f0162b34)
It is not necessary to hold a complete copy `sdcard_spi_params_t` in the device descriptor. Constant parameters can be used directly from ROM instead. This saves 24 bytes of RAM.
### Testing procedure
Use any board with SD Card SPI interface. The driver test should still work, for example:
```
BOARD=esp32-wrover-kit make -j8 -C tests/driver_sdcard_spi flash term
```
```
main(): This is RIOT! (Version: 2023.07-devel-176-g7213c-drivers/sdcard_spi_cleanup)
SD-card spi driver test application
insert SD-card and use 'init' command to set card to spi mode
WARNING: using 'write' or 'copy' commands WILL overwrite data on your sd-card and
almost for sure corrupt existing filesystems, partitions and contained data!
> init
Initializing SD-card at SPI_0...
[OK]
>
```
### Issues/PRs references
19530: sys/xtimer: add missing "modules.h" include to `xtimer.h` r=benpicco a=kaspar030
19532: tests/unittests: tests-core-mbox: add missing `container.h` include r=benpicco a=kaspar030
19533: core: move macros/math.h to core/lib/include/macros r=benpicco a=kaspar030
19535: nanocoap_sock: defuse nanocoap_sock_get() API footgun r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
19526: boards/arduino-mkrwan1300: update board name to correct one r=aabadie a=FlapKap
Co-authored-by: Kasper Hjort Berthelsen <kasper.berthelsen@hotmail.com>
19516: cpu/rpx0xx: add initial ADC support r=dylad a=dylad
### Contribution description
This PR adds initial support for RP2040 ADC peripheral.
It is rather minimalist, and only use oneshot trigger to perform a single acquisition.
I've tested this PR using a potentiometer connected between GND and 3V3.
GP26, GP27, GP28 has been tested.
### Testing procedure
Select `ADC_RES_12BIT` and flash `tests/periph_adc`
`make BOARD=rpi-pico -C tests/periph_adc`
### Issues/PRs references
None.
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19447: boards/nucleo-f429zi: Provide 2nd timer r=benpicco a=maribu
### Contribution description
- Add a common timer config with two (instead of only one) timer using TIM2 + TIM5
- Mostly copy-pasting the cfg_timer_tim2.h and cfg_timer_tim5.h together
- Make use of that for the `nucleo-f429zi`
### Testing procedure
E.g. `tests/periph_timer`, but also grepping for TIM2 and TIM5 in `boards/nucleo-f429zi/include/periph_conf.h` to detect any conflict e.g. between PWM and timer config.
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19432: boards/esp32: deduplication in common ESP32x board definitions r=benpicco a=gschorcht
### Contribution description
The PR reduced code duplication in `boards/common/esp32*`.
The PR moves the header files from `boards/common/esp32s3/include` that can be used for all types of ESP32x SoCs to a new common ESP32x board definition which is then included by all common ESP32x board definitions.
### Testing procedure
Green CI.
### Issues/PRs references
19461: drivers/enc28j60: fix ISR routine and bth r=benpicco a=peteut
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alain Péteut <alain.peteut@yahoo.com>
The board uses the USB OTG HS peripheral together with the on-hip FS PHY. Using the `periph_usbdev_hs` module increases the EP data size for the CDC ECM bulk endpoint to 512 bytes, which does not work for the FS interface. Module `periph_usbdev_hs` is therefore not used.
19417: boards/esp32c3-wemos-mini: add support for Wemos ESP32-C3 mini r=benpicco a=gschorcht
### Contribution description
This PR provides the support for the [Wemos ESP32-C3 mini](https://www.wemos.cc/en/latest/c3/c3_mini.html) board.
### Testing procedure
The board should work for provided features.
The board was already tested with:
- [x] `tests/driver_sht3x` using I2C
- [x] `tests/driver_l3gxxxx` using SPI
- [x] `tests/periph_adc`
- [x] `tests/periph_pwm`
- [ ] `tests/driver_ws281x`
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The commit moves the header files from `boards/common/esp32s3/include` that can be used for all types of ESP32x SoCs to a new common ESP32x board module.
19397: drivers/usbdev_synopsys_dwc2: fix and reenable DMA mode r=benpicco a=gschorcht
### Contribution description
This PR fixes the DMA mode for all STM32 USB OTG HS cores (including that for STM32F4xx CID 1.xxx) and reenables it. It fixes remaining problems in issue #19359.
This PR includes also includes some changes that are needed to use the DMA mode:
- EP number is used as defined in CMSIS (if defined) for STM32
- `periph_usbdev_hs` feature is added in Kconfig
- `periph_usbdev_hs` feature is added in board definition of `stm32f429i-disc1`
- largest number of available EPs is used for STM32 instead of the smallest number (to be able to use all EPs of HS peripheral)
- `stm32f429i-disco` is removed from blacklist in `tests/usbus_cdc_ecm` since it uses the HS peripheral
### Testing procedure
The following tests should work
```python
USEMODULE=stdio_cdc_acm BOARD=stm32f429i-disc1 make -j8 -C tests/usbus_cdc_ecm flash
```
<details>
<summary>Test results</summary>
```python
[526755.875691] usb 1-2.2: new full-speed USB device number 106 using xhci_hcd
[526755.977853] usb 1-2.2: config 1 interface 3 altsetting 1 endpoint 0x84 has invalid maxpacket 512, setting to 64
[526755.977856] usb 1-2.2: config 1 interface 3 altsetting 1 endpoint 0x2 has invalid maxpacket 512, setting to 64
[526755.978762] usb 1-2.2: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
[526755.978764] usb 1-2.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[526755.978766] usb 1-2.2: Product: stm32f429i-disc1
[526755.978768] usb 1-2.2: Manufacturer: RIOT-os.org
[526755.978769] usb 1-2.2: SerialNumber: 7C156425A950A8EB
[526755.991190] cdc_acm 1-2.2:1.0: ttyACM1: USB ACM device
[526755.998131] cdc_ether 1-2.2:1.2 usb0: register 'cdc_ether' at usb-0000:00:14.0-2.2, CDC Ethernet Device, a6:f6:4a:85:1d:c9
[526756.044150] cdc_ether 1-2.2:1.2 enp0s20f0u2u2i2: renamed from usb0
```
</details>
```python
USEMODULE='stdio_cdc_acm periph_usbdev_hs_utmi' BOARD=stm32f723e-disco make -j8 -C tests/usbus_cdc_ecm flash
```
<details>
<summary>Test results</summary>
```python
[528733.480207] usb 1-4.3.4: reset high-speed USB device number 32 using xhci_hcd
[528733.707800] usb 1-4.4: new high-speed USB device number 111 using xhci_hcd
[528733.808257] usb 1-4.4: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
[528733.808260] usb 1-4.4: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[528733.808263] usb 1-4.4: config 1 interface 1 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 64
[528733.808642] usb 1-4.4: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
[528733.808645] usb 1-4.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[528733.808647] usb 1-4.4: Product: stm32f723e-disco
[528733.808649] usb 1-4.4: Manufacturer: RIOT-os.org
[528733.808651] usb 1-4.4: SerialNumber: A6BAC4E1B1E0806B
[528733.811988] cdc_acm 1-4.4:1.0: ttyACM1: USB ACM device
[528733.814456] cdc_ether 1-4.4:1.2 usb0: register 'cdc_ether' at usb-0000:00:14.0-4.4, CDC Ethernet Device, e6:75:97:3a:74:ba
[528733.854371] cdc_ether 1-4.4:1.2 enp0s20f0u4u4i2: renamed from usb0
```
</details>
```python
USEMODULE='stdio_cdc_acm periph_usbdev_hs_ulpi' BOARD=stm32f746g-disco make -j8 -C tests/usbus_cdc_ecm flash
```
<details>
<summary>Test results</summary>
```python
[529000.944482] usb 1-4.3.4: reset high-speed USB device number 32 using xhci_hcd
[529003.728260] usb 1-4.4: new high-speed USB device number 114 using xhci_hcd
[529003.833107] usb 1-4.4: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
[529003.833111] usb 1-4.4: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[529003.833113] usb 1-4.4: config 1 interface 1 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 64
[529003.833743] usb 1-4.4: New USB device found, idVendor=1209, idProduct=7d00, bcdDevice= 1.00
[529003.833747] usb 1-4.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[529003.833749] usb 1-4.4: Product: stm32f746g-disco
[529003.833751] usb 1-4.4: Manufacturer: RIOT-os.org
[529003.833753] usb 1-4.4: SerialNumber: 66FE8934D1A363E0
[529003.837143] cdc_acm 1-4.4:1.0: ttyACM1: USB ACM device
[529003.839755] cdc_ether 1-4.4:1.2 usb0: register 'cdc_ether' at usb-0000:00:14.0-4.4, CDC Ethernet Device, 6a:88:1f:1f:b1:f0
[529003.879025] cdc_ether 1-4.4:1.2 enp0s20f0u4u4i2: renamed from usb0```
```
</details>
### Issues/PRs references
Fixes#19359
19416: cpu/rpx0xx/cmsis: Update vendor header files r=benpicco a=maribu
### Contribution description
Generated new vendor header files from upstream SVD files using:
./SVDConv "$PICO_SDK_DIR"/src/rp2040/hardware_regs/rp2040.svd \
--generate=header --fields=macro --fields=enum
Note: The missing `--fields=struct` flag resulted in the header no longer containing bit-fields to represent different fields within registers. While this would generally ease writing code, the RP2040 has the unpleasant feature of corrupting the remaining bits of the register when a write access that is not word-sized occurs in the memory mapped I/O area. This could happen e.g. when a bit field is byte-sized and byte-aligned.
### Testing procedure
No binary changes (hopefully).
### Issues/PRs references
This adds a few additional vendor defines, notably for USB. If anyone were to implement USB, this would be a requirement.
19418: cpu/gd32v: fix gpio_read in periph_gpio r=benpicco a=gschorcht
### Contribution description
This PR fixes a bug in `gpio_read` which made `gpio_read` completely unusable!
A small bug with big consequences. In `gpio_read` the combined port | pin_num parameter `pin` was used instead of the pin number `pin_num` for the call of `_pin_is_input`. This caused the problem that for example instead of accessing GPIOA->CTL0 with address 0x40010800, address 0x60018c00 was accessed. As a result, a pin was randomly detected as input or output and thus a result was arbitrarily returned. Approx. 50% of all inputs always returned LOW.
I found this error by coincidence when I tried to find out why the BOOT0 button on a Sipeed Longan Nano is not usable as a button in RIOT.
### Testing procedure
Flash `tests/periph_gpio`
```
BOARD=sipeed-longan-nano make -j8 -C tests/periph_gpio flash
```
and use commands
```
init_in 0 8
read 0 8
```
Without this PR, the pin is always LOW. With the PR, the pin should be HIGH when the BOOT button is pressed.
### Issues/PRs references
19419: boards/sipeed-longan-nano: add BOOT as user button r=benpicco a=gschorcht
### Contribution description
This PR makes the BOOT button usable as a user button.
### Testing procedure
The test requires PR #19418 to work.
Flash and test:
```
BOARD=sipeed-longan-nano make -j8 -C tests/saul flash term
```
The output
```
Dev: BOOT Type: SENSE_BTN
Data: 0
```
should change to
```
Dev: BOOT Type: SENSE_BTN
Data: 1
```
when the BOOT button is pressed.
### Issues/PRs references
Depends on PR #19418
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Generated new vendor header files from upstream SVD files using:
./SVDConv "$PICO_SDK_DIR"/src/rp2040/hardware_regs/rp2040.svd \
--generate=header --fields=macro --fields=enum
Note: The missing `--fields=struct` flag resulted in the header no
longer containing bit-fields to represent different fields
within registers. While this would generally ease writing code,
the RP2040 has the unpleasant feature of corrupting the
remaining bits of the register when a write access that is not
word-sized occurs in the memory mapped I/O area. This could
happen e.g. when a bit field is byte-sized and byte-aligned.
19410: boards/common/gd32v: improve openocd config r=benpicco a=gschorcht
### Contribution description
This PR improves the OpenOCD config for GD32V.
To restart GD32V after flashing, a special magic procedure has to be used. For short:
```python
halt
gd32vf103.cpu mww 0xe004200c 0x4b5a6978 # unlock 0xe0042008, the next write triggers a reset
riscv set_mem_access abstract # set abstract memory access
gd32vf103.cpu mww 0xe0042008 0x1 # write to 0xe0042008 to triggers a reset
riscv set_mem_access progbuf # set memory access mode back
resume
```
The final `resume` was missing so that a timeout with an error message happened after flashing, for example:
```python
wrote 14692 bytes from file tests/shell/bin/sipeed-longan-nano/tests_shell.elf in 1.845550s (7.774 KiB/s)
verified 14692 bytes in 0.071006s (202.063 KiB/s)
Info : JTAG tap: gd32vf103.cpu tap/device found: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Info : JTAG tap: auto0.tap tap/device found: 0x790007a3 (mfg: 0x3d1 (GigaDevice Semiconductor (Beijing) Inc), part: 0x9000, ver: 0x7)
Error: Timed out after 2s waiting for busy to go low (abstractcs=0x2001004). Increase the timeout with riscv set_command_timeout_sec.
Warn : Failed to write memory via abstract access.
Error: Target gd32vf103.cpu: Failed to write memory (addr=0xe0042008)
Error: progbuf=disabled, sysbus=disabled, abstract=failed
Error executing event reset-assert on target gd32vf103.cpu:
embedded:startup.tcl:1187: Error:
in procedure 'ocd_process_reset'
in procedure 'ocd_process_reset_inner' called at file "embedded:startup.tcl", line 1187
shutdown command invoked
Done flashing
```
With the final `resume`, still an error message happens that hart 0 is unavialable, but the timeout with all these errors do not occur and OpenOCD exits immediatly:
```python
wrote 14732 bytes from file /home/gs/src/RIOT-Xtensa-ESP.esp-idf-4.4/tests/shell/bin/sipeed-longan-nano/tests_shell.elf in 1.516376s (9.488 KiB/s)
verified 14732 bytes in 0.045381s (317.021 KiB/s)
Info : JTAG tap: gd32vf103.cpu tap/device found: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Info : JTAG tap: auto0.tap tap/device found: 0x790007a3 (mfg: 0x3d1 (GigaDevice Semiconductor (Beijing) Inc), part: 0x9000, ver: 0x7)
Error: Hart 0 is unavailable.
Info : Hart 0 unexpectedly reset!
shutdown command invoked
Done flashing
```
### Testing procedure
Flash any GD32V board with and without this PR and observe the output.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19408: boards/esp32: enable RGB LED support r=benpicco a=gschorcht
### Contribution description
A couple of ESP32x boards have a SK68XXMINI-HS RGB LED on board.
- `esp32c3-devkit`
- `esp32s2-devkit`
- `esp32s3-devkit`
This RGB LED can be used with the driver module `ws2812x`. This PR adds the `WS2812X_PARAMS*` parameter definitions to the board definition and updates the documentation.
### Testing procedure
Use any of these boards to flash `tests/driver_ws2812x`, for example:
```
BOARD=esp32c3-devkit make -j8 -C tests/driver_ws281x/ flash
```
The RGB LED should work as expected.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19357: boards/adafruit-itsybitsy-m4: turn off APA102 LED on startup r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
