19733: cpu/msp430: reorganize code r=maribu a=maribu
### Contribution description
RIOT supports two distinct families of the MSP430: The [MSP430 x1xx] MCU family and the [MSP430 F2xx/G2xx] MCU family. For both incompatible MCU families the code was located in the msp430fxyz folder, resulting in case of the UART driver in particularly bizarre code looking roughly like this:
```C
#ifndef UART_USE_USCI
/* implementation of x1xx peripheral ... */
#else
/* implementation of F2xx/G2xx peripheral ... */
#endif
/* zero shared code between both variants */
```
This moves peripheral drivers shared between the two families to msp430_common and splits the SPI and UART driver into two MCU families.
In addition, it cleans up the `msp430_regs.h` by dropping most of it and using the macros and symbols provided by the vendor header files. There is little reason for us to maintain constants when TI is already doing that.
[MSP430 x1xx]: https://www.ti.com/lit/ug/slau049f/slau049f.pdf
[MSP430 F2xx/G2xx]: https://www.ti.com/lit/ug/slau144k/slau144k.pdf
19747: gnrc/ipv6/nib: reset rs_sent counter also for not-6LN interfaces r=maribu a=fabian18
19769: cpu/nrf53: add initial support with nRF5340DK-APP board r=maribu a=dylad
### Contribution description
This PR adds support for nRF5340 MCU and its associated Nordic development board, nRF5340DK.
This MCU provides a dual Cortex-M33, one application core running at up to 128MHz, and one network core running at up to 64MHz.
Peripherals are inherited from others Nordic MCUs families so it shouldn't be hard to add more of them in followup PRs.
For now, only the minimal set of peripherals is supported:
- GPIO / GPIO_IRQ
- UART
- TIMER
### Testing procedure
Build the usual test application for the supported peripherals and flash the board.
nRF5340DK provides two serial ports on its embedded debugger. RIOT's shell should be available on the first one (/dev/ttyACM0)
### Issues/PRs references
#18576#19267
19782: cpu/msp430: fix for ti's msp430-gcc-opensource package ld version r=maribu a=hugueslarrive
### Contribution description
My msp430 toolchain (https://www.ti.com/tool/MSP430-GCC-OPENSOURCE) was broken by #19484:
```
hugues@p700:~/github/cpu_msp430_common/RIOT$ BOARD=msb-430 make -j64 -C examples/hello-world
make : on entre dans le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
Building application "hello-world" for "msb-430" with MCU "msp430fxyz".
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core/lib
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers/periph_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/auto_init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/div
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/libc
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/malloc_thread_safe
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/newlib_syscalls_default
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz/periph
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/preprocessor
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/stdio_uart
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common/periph
/opt/ti/msp430-gcc/bin/../lib/gcc/msp430-elf/9.3.1/../../../../msp430-elf/bin/ld: .rodata not found for insert
collect2: error: ld returned 1 exit status
make: *** [/home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world/../../Makefile.include:761 : /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world/bin/msb-430/hello-world.elf] Erreur 1
make : on quitte le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
hugues@p700:~/github/cpu_msp430_common/RIOT$ /opt/ti/msp430-gcc/msp430-elf/bin/ld --version
GNU ld (Mitto Systems Limited - msp430-gcc 9.3.1.11) 2.34
Copyright (C) 2020 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) a later version.
This program has absolutely no warranty.
hugues@p700:~/github/cpu_msp430_common/RIOT$ /opt/ti/msp430-gcc/msp430-elf/bin/ld --version | grep -Eo '[0-9]\.[0-9]+'
9.3
1.11
2.34
hugues@p700:~/github/cpu_msp430_common/RIOT$ /opt/ti/msp430-gcc/msp430-elf/bin/ld --version | grep -Eo '[0-9]\.[0-9]+$'
2.34
```
### Testing procedure
```
hugues@p700:~/github/cpu_msp430_common/RIOT$ BOARD=msb-430 make -j64 -C examples/hello-world
make : on entre dans le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
Building application "hello-world" for "msb-430" with MCU "msp430fxyz".
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core/lib
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers/periph_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/auto_init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/div
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/libc
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/malloc_thread_safe
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/newlib_syscalls_default
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/preprocessor
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/stdio_uart
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz/periph
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common/periph
text data bss dec hex filename
8612 722 866 10200 27d8 /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world/bin/msb-430/hello-world.elf
make : on quitte le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
```
### Issues/PRs references
Introduced by #19484, highlighted in #16727.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Co-authored-by: Fabian Hüßler <fabian.huessler@ml-pa.com>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Hugues Larrive <hlarrive@pm.me>
The MSP430 vendor files already provide macros containing register
constants and symbols (provided via linker scripts) containing addresses
of peripheral registers. So lets make use of that rather than
maintaining a long list of constants.
19750: dist/tools/usb-serial: Fix handling of None while quoting r=aabadie a=maribu
### Contribution description
This fixes:
Traceback (most recent call last):
File "/home/maribu/Repos/software/RIOT/master/dist/tools/usb-serial/ttys.py", line 259, in <module>
print_ttys(sys.argv)
File "/home/maribu/Repos/software/RIOT/master/dist/tools/usb-serial/ttys.py", line 255, in print_ttys
print_results(args, ttys)
File "/home/maribu/Repos/software/RIOT/master/dist/tools/usb-serial/ttys.py", line 189, in print_results
if item.rfind(args.format_sep) >= 0:
^^^^^^^^^^
AttributeError: 'NoneType' object has no attribute 'rfind'
Which occurs while testing whether a string requires special quoting if an attribute is None.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
This fixes:
Traceback (most recent call last):
File "/home/maribu/Repos/software/RIOT/master/dist/tools/usb-serial/ttys.py", line 259, in <module>
print_ttys(sys.argv)
File "/home/maribu/Repos/software/RIOT/master/dist/tools/usb-serial/ttys.py", line 255, in print_ttys
print_results(args, ttys)
File "/home/maribu/Repos/software/RIOT/master/dist/tools/usb-serial/ttys.py", line 189, in print_results
if item.rfind(args.format_sep) >= 0:
^^^^^^^^^^
AttributeError: 'NoneType' object has no attribute 'rfind'
Which occurs while testing whether a string requires special quoting
if an attribute is None.
19703: cpu/sam0_eth: interrupt based link detection/auto-negotiation r=benpicco a=benpicco
19724: dist/tools/openocd: add OPENOCD_SERVER_ADDRESS variable r=benpicco a=fabian18
19735: nrf5x_common: Clear I2C periph shorts r=benpicco a=bergzand
### Contribution description
The I2C peripheral's shortcuts are used with the read and write register to automatically stop the I2C transaction or to continue with the next stage.
With simple I2C read and write bytes these shorts are not used, but are also not cleared by the function in all cases, causing it to use the shortcut configuration set by a previous function call. This patch ensures that the shorts are always set by the read and write functions
### Testing procedure
Should be possible to spot with a logic analyzer and the I2C periph test. Maybe the HIL test can also detect it :)
### Issues/PRs references
None
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Fabian Hüßler <fabian.huessler@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
19556: tools/mspdebug: fix `make debug` and `make debugserver` r=aabadie a=maribu
### Contribution description
The semantics of `make debug` and `make debugserver` have changed in the years since the MSP430 integration. This brings the implementation back into line with the current semantics
- `make debug` now starts both mspdebug and GDB, no need to run `make debugserver` prior to `make debug` anymore
- `make debug` no longer flashes the target to not waste flash erase cycles
- GDB mutliarch support is added
- support for selecting a debug adapter by its serial is added
19662: driver/lc709203f: remove unnecessary use of float r=aabadie a=kfessel
### Contribution description
removes a unnecessary use of float
### Testing procedure
read and test if you got that hardware (I don't)
### Issues/PRs references
#19614
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
The semantics of `make debug` and `make debugserver` have changed in
the years since the MSP430 integration. This brings the implementation
back into line with the current semantics
- `make debug` now starts both mspdebug and GDB, no need to
run `make debugserver` prior to `make debug` anymore
- `make debug` no longer flashes the target to not waste flash erase
cycles
- GDB mutliarch support is added
- support for selecting a debug adapter by its serial is added
19620: dist/tools/openocd: fix parsing of flash bank base r=aabadie a=maribu
### Contribution description
Since [80fc9fabc66a0bc767467fa14c703e5a9f340cd3] the format of the `flash list` command changed to a more human readable multi-line variant. Technically, the change is white-space only. Still, the current approach of parsing them with awk, sed and cut doesn't like the new multi-line format. The parsing is now delegated into a python script that is compatible across OpenOCD versions.
[80fc9fabc66a0bc767467fa14c703e5a9f340cd3]: 80fc9fabc6
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19602: dist/tools/compile_commands: add another workaround r=chrysn a=maribu
### Contribution description
Filter out GCC only `--param=min-pagesize=0` in `clangd` mode. This fixes compilation of rust applications, that now fails with:
thread 'main' panicked at 'Unable to generate bindings: ClangDiagnostic("error: argument unused during compilation: '--param=min-pagesize=0' [-Wunused-command-line-argument]\n")', /home/maribu/.cargo/git/checkouts/rust-riot-sys-d12733b89271907c/b4bd4bd/build.rs:224:10
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Filter out GCC only `--param=min-pagesize=0` in `clangd` mode. This
fixes compilation of rust applications, that now fails with:
thread 'main' panicked at 'Unable to generate bindings: ClangDiagnostic("error: argument unused during compilation: '--param=min-pagesize=0' [-Wunused-command-line-argument]\n")', /home/maribu/.cargo/git/checkouts/rust-riot-sys-d12733b89271907c/b4bd4bd/build.rs:224:10
Since 80fc9fabc66a0bc767467fa14c703e5a9f340cd3 the format of the
`flash list` command changed to a more human readable multi-line
variant. Technically, the change is white-space only. Still, the
current approach of parsing them with awk, sed and cut doesn't like
the new multi-line format. The parsing is now delegated into a
python script that is compatible across OpenOCD versions.
- Replace all users of `$(RIOTBASE)/build` with the already present
`$(BUILD_DIR)` variable
- Replace all users of `$(BUILD_DIR)/pkg` with the already present
`$(PKGDIRBASE)` variable
- Create a `CACHEDIR.TAG` file in the `$(BUILD_DIR)`
19558: boards: support for Olimex MSP430-H1611 board r=maribu a=maribu
### Contribution description
- implement a clock driver so that boards declare their clock configuration, rather than initializing the CPU clock in `board_init()` by hand
- Note: A board can still overwrite the weak symbol `clock_init()` in case some really crazy things should happen
- add support for the Olimex-H1611 board
19598: dist/tools/insufficient_memory: fix collection of app folders r=maribu a=maribu
### Contribution description
There is actually a make target to list the applications in the repo. Let's just use that.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Provide a common clock initialization driver rather than leaving
clock initialization to the boards code. A declarative description of
the board's clock configuration using a struct does still allow to
fine-tune settings. In addition, a board is still allowed to just
provide a custom `void clock_init(void)` if there really is the need
to do crazy things.
When a region wraps around the address space, the application typically
is way too large to fit into the 16 bit address space of 16 bit or
8 bit platforms. Hence, classify this as "too big" in the tools.
19548: boards/telosb: minor clean ups r=maribu a=maribu
### Contribution description
This cleans up the documentation and the header files of the TelosB board. It is supposed to not changed the generated firmware (except for debug symbols).
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
