- Fixed documentation
- Use bitwise operation instead of multiplication and addition in `GPIO_PIN()`
- Allow GPIOs to be configured as input via `gpio_init()`
- Fixed bugs in `gpio_init_mux`:
- `0x01 << ((pin & 31) * 2)` was used before to generate the bitmask, but
this would shift by 62 to the left. Correct is `0x01 << ((pin & 15) * 2)`
(See [datasheet](https://www.nxp.com/docs/en/user-guide/UM10211.pdf) at
pages 156ff)
- Only one of the two bits was cleared previously
- Changed strategy to access GPIO pins:
- Previous strategy:
- Set all bits in FIOMASK except the one for the pin to control to
disable access to them
- Set/clear/read all pins in the target GPIO port (but access to all but
the target pin is ignored because of the applied FIOMASK)
- New strategy:
- Set/clear/read only the target pin
- Advantages:
- Only one access to a GPIO register instead of two
- Proven approach: Access to GPIOs on lpc2387 is mostly done by
accessing the GPIO registers directy (e.g. see the sht11 driver).
Those accesses never touch the FIOMASK register
- No unwanted side effects: Disabling all but one pin in a GPIO port
without undoing that seems not to be a good idea
- removed ISR_STACKSIZE define where unused (set to 0)
- removed thread_arch_isr_stack_usage(), thread_arch_isr_stack_start(),
and/or thread_arch_isr_stack_pointer() where not implemented
As discussed in #2725, this commit renames a number of stacksize constants to
better convey their intended usage. In addition, constants for thread priority
are given a `THREAD_` prefix. Changes are:
* KERNEL_CONF_STACKSIZE_PRINTF renamed to THREAD_EXTRA_STACKSIZE_PRINTF
* KERNEL_CONF_STACKSIZE_DEFAULT renamed to THREAD_STACKSIZE_DEFAULT
* KERNEL_CONF_STACKSIZE_IDLE renamed to THREAD_STACKSIZE_IDLE
* KERNEL_CONF_STACKSIZE_MAIN renamed to THREAD_STACKSIZE_MAIN
* Move thread stacksizes from kernel.h to thread.h, since the prefix changed
* PRIORITY_MIN renamed to THREAD_PRIORITY_MIN
* PRIORITY_IDLE renamed to THREAD_PRIORITY_IDLE
* PRIORITY_MAIN renamed to THREAD_PRIORITY_MAIN
* Move thread priorities from kernel.h to thread.h since the prefix has changed
* MINIMUM_STACK_SIZE renamed to THREAD_STACKSIZE_MINIMUM for consistency
This PR converts tabs to white spaces.
The statement I used for the conversion:
```find . -name "*.[ch]" -exec zsh -c 'expand -t 4 "$0" > /tmp/e && mv /tmp/e "$0"' {} \;```
Afterwards, I had a quick overview of the converted files to prevent odd indentation.
