Using flash size in megabits is deprecated by esptool.
Use the new megabyte notation.
WARNING: Flash size arguments in megabits like '8m' are deprecated.
Please use the equivalent size '1MB'.
Megabit arguments may be removed in a future release.
esptool.py v2.6
UART FIFO must contain only 1 byte when newlib's `printf` function is used. Otherwise, outputs that are still not sent over UART are lost when `printf` is called asynchronousely.
To avoid unresolved symbols for unused functions during linking, compiler option `-ffunction-sections` is used now. Linker option `--warn-unresolved-symbols` is removed to get errors if required symbols cannot be resolved.
The modules `newlib, `newlib_syscalls_default` and `stdio_uart` are now used by default for output to the UART interface. This also reduces the dependency rules.
The overridden stdio functions `puts`, `putchar` and `printf` were removed. Instead, the corresponding newlib functions are always used. Using the newlib functions fixes output conflicts when using `f *` functions like `fprintf`,` fputs`, ... with `stdout` as the file parameter.
Use the -gz option to compress ELF sections containing DWARF information.
This saves around 50% of disk space, without any side effects.
See https://gcc.gnu.org/onlinedocs/gcc-9.2.0/gcc/Debugging-Options.html#Debugging-Options
for more infomation on this option.
Some platforms have an outdated toolchain that does not support -gz so
the flag is blacklisted there. Even then, the results are quite impressive.
I used @cladmi's `buildtest` branch (https://github.com/cladmi/RIOT/tree/wip/du/buildtest)
with this change and compiled the `examples/default` application:
```
$ BUILD_IN_DOCKER=1 DOCKER="sudo docker" make -C examples/default buildtest-indocker
```
The size was obtained with:
```
$ find output -name "*.bin.bindirsize" -type f -exec tail -n1 '{}' \; | cut -f 1 | awk '{s+=$1} END {printf "%.0f", s}'
```
Results:
- Vanilla: 10328112 KB (~10GB).
- with -gz: 4982788 KB (~5GB).
This was inspired by #8496.
In the `pwm_set` function, the switch-on and switch-off times for PWM channels were only determined for the following phase, but not for the current phase. This could result in a missing duty cycle when calling the function `pwm_set` if the switch-on time of the current phase was not yet reached or to an extended duty cycle if the switch-off time of the current phase had not yet been reached.
Rational: the periph_common module is required by (most) other periph drivers
and also during startup of the CPU/MCU to run periph_init. The latter is only
required if other periph drivers are used, hence periph_common should be a
depency of periph_* modules and *not* of the CPU/MCU. This PR fixes that
by making periph_common a depency of periph_* and removing the explicit
include in the CPU/MCU implementation.
PREFLASHER/PREFFLAGS/FLASHDEPS are evaluated by the main Makefile.include.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `16 insertions(+), 16 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE` plus the newline that is said to have
changed.
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
`top_of_stack` isn't aligned down to the previous 16 byte aligned address. Furthermore, `top_of_stack` as well as `XT_CP_SIZE` are used unaligned in `cpu/esp_common/vendor/xtensa/portasm.S` in the address computation for the coprocessor save area, .
Aligning pointer `p` down to the previous 16 byte aligned address results in a wrong address of the coprocessor save area during the initialization of the thread context. This leads to wrong values and wrong positions of these values in the coprocessor save area in inital thread context.
Since ESP8266 doesn't have a coprocessor, this bug affects only ESP32.
Calling the initialization function ensures that the dummy lwIP library is used instead of the real lwIP, even if the esp_wifi module for esp8266 is not used.
The documentation had to be changed due to the relation of module `esp_now` to `esp_wifi` module. In addition, a number of corrections have been made. In the case of documentation, it is impossible to do this in various commits.
Usually, all .rodata sections are placed in RAM by the Espressif SDK since IROM (flash) access requires 32-bit word aligned reads. thanks to the LoadStoreError exception handler from esp-open-rtos which is used now in RIOT-OS, it is also possible to place .rodata sections in IROM (flash) to save RAM resources.
Usually, the access to the IROM (flash) memory requires 32-bit word aligned reads. Attempts to access data in the IROM (flash) memory less than 32 bits in size triggers a LoadStoreError exception. With the exception handler from esp-open-rtos it becomes possible to access data in IROM (flash) with a size of less than 32 bits and thus to place .rodata sections in the IROM (flash).
Checking by the send function that at least two maximum size Ethernet frames fit in the remaining heap before the LwIP packet buffer is allocated seems to increase stability. This can be caused by the fact that WLAN hardware interrupts allocate additional memory when receiving a frame during the send attempt.
The situation where the firmware `lwIP` packet buffer is exhausted is an important indication that the traffic sent to and sent from the esp8266 is more than the esp8266 is able to handle. Therefore, it should be an error message.
It is not necessary to realize timeout handling in send function or to disconnect from AP if lwIP packet buffer is exhausted. Waiting that the frame allocated in lwIP packet buffer is freed by MAC layer led to the complete blockage of send function on heavy network load. Disconnecting from AP is counterproductive since reconnecting usually fails on heavy network load.
Disconnecting from the AP in the send function if the lwIP packet buffer is exhausted is counterproductive since reconnecting usually fails on heavy network load. A better strategy is to slow down the sending of MAC frames from netif a bit to wait for flushing the buffer in the MAC layer.
